유한요소법에 의한 자기공명영상시스템에서의 와전류 영향 분석

이정한,강현수,조민형,문치웅,이강석,이수열,Lee, Jeong-Han,Gang, Hyeon-Su,Jo, Min-Hyeong,Mun, Chi-Ung,Lee, Gang-Seok,Lee, Su-Yeol 대한의용생체공학회 1999 의공학회지 Vol.20 No.1

Eddy current in MRI systems degrades gradient field linearity and distorts gradient waveform. When the waveform distortion is spatially variant, it is very difficult to perform special imaging techniques such as the echo planar imaging technique or the fast spin echo imaging technique. In this study, we have developed a new technique to estimate the distorted gradient waveforms at any points inside the imaging region using the finite element method. After obtaining the eddy-current-effect transfer function, which represents magnitude and phase characteristics of the gradient field at a particular point, we have used the transfer function to estimate the actual gradient waveforms at the point. To verify the proposed technique, we have compared the estimated gradient waveforms with the measured ones. 자기공명영상시스템에서 경사자계코일에 전류 펄스를 인가할 때 코일 주변의 도전성 구조물에 유도되는 와전류는 경사자계의 선형성을 열화 시킬 뿐만 아니라 경사자계의 파형을 왜곡시킨다. 특히 경사자계 파형의 왜곡 정도가 공간 위치에 따라 다를 경우 고속촬영법과 같은 고성능의 자기공명영상법을 실현하는 것이 어려워 진다. 본 연구에서는 촬영 공간 내 임의의 지점에서 와전류에 의해 경사자계 파형이 변형되는 정도를 알 수 있는 방법을 유한요소법을 이용해 구하였다. 경사자계코일에 정현파를 인가했을 때 임의의 지점에서 자계의 진폭 및 위상 특성이 주파수에 따라 어떻게 변하는지를 나타내는 와전류 영향 전달함수를 구하였고, 이 전달함수를 이용해 임의의 입력 전류 파형에 대한 출력 경사자계 파형을 예측하였다. 제안한 방법의 타당성을 검증하기 위해 실제로 측정한 경사자계 파형을 예측한 파형과 비교하여 제시하였다.

산업장 근로자의 주관적 건강인식에 영향을 미치는 요인 분석

이정한,고연석,권소희,김삼태,정해경,박승정,송용선,이기남,Lee Jeong-Han,Ko Youn-Seok,Kwon So-Hee,Kim Sam-Tae,Jung Hae-Kyoung,Park Seung-Jong,Song Yung-Sun,Lee Ki-Nam 대한예방한의학회 2004 대한예방한의학회지 Vol.8 No.1

This study tried to analyze influencing factors on self-perceived health status(SPHS) of labors in workplace. and suggested the preventive oriental medicine approaches in occupational health care. 914 data for research were collected through the process of oriental health examination with questionnaire in workplace and collected data were analyzed with frequency, homogeneity and correlation statistically. The results were as follows : 1) The distributions of SPHS was 58.4% of healthy group. 41.6% of unhealthy group. 2) For the difference of SPHS by stress, the high level stress group was more included in healthy group(p<0.05). 3. For the difference of SPHS by health behavior. the higher score of health behavior group was more included in healthy group. There was statistically significant difference of SPHS in physical exercise, but not in smoking, drinking, sleeping and body mass index. 4. For the difference of SPHS by the latest health examination results, non-disease group was more included in healthy group, while disease group was more included in unhealthy group. From the above results, SPHS was influenced by stress, health behavior, the latest health examination results. Therefore oriental medical service for occupational health must be interested in the these influencing factors and make an effort to change their perception of health as well as physical improvement.

레이저 열원을 이용한 마그네슘 합금의 용접성에 관한 연구 (I) - AZ31B-H24 및 AZ31B-O의 레이저 용접성 비교 -

이정한,김종도,이문용,Lee, Jung-Han,Kim, Jong-Do,Lee, Mun-Yong 대한용접접합학회 2012 대한용접·접합학회지 Vol.30 No.5

This study is related to the laser weldability of AZ31B magnesium alloy, an all-purpose wrought alloy with good strength and ductility. In general, AZ31B is classified into AZ31B-H24 and AZ31B-O depending on temper designation. Thus, in this study, the laser weldability of AZ31B-H24 and AZ31B-O was investigated and compared. CW Nd:YAG laser was used to produce bead and butt joints. And the effects of welding conditions on the weldability of these joints were examined in detail. As a result of this study, AZ31B-H24 was found to have thinner oxide film and smaller grain size compared with AZ31B-O. Due to such difference, in bead welding, AZ31B-H24 had more wide welding range for full penetration compared with AZ31B-O. Furthermore, it was also confirmed that AZ31B-H24 and AZ31B-O have different welding conditions to obtain stable keyhole in butt welding.

ADAMS

이정한,Lee, Jeong-Han 대한기계학회 2007 기계저널 Vol.47 No.3

레이저 열원을 이용한 마그네슘 합금의 용접성에 관한 연구 (II) - AZ31B-H24 및 AZ31B-O 레이저 용접부의 기계적 특성 -

이정한,김종도,이문용,Lee, Jung-Han,Kim, Jong-Do,Lee, Mun-Yong 대한용접접합학회 2012 대한용접·접합학회지 Vol.30 No.6

Magnesium alloy sheet which is commercially available in the market presently is AZ31B, a Mg-Al-Zn three elements alloy. AZ31B is used by being classified into AZ31B-H24 and AZ31B-O depending on temper designation. In this study, AZ31B-H24 and AZ31B-O alloy sheets with 1.25mm thickness were butt-welded using CW Nd:YAG laser. And the effect of materials on mechanical properties was investigated by tensile and hardness tests. As a result of this study, regardless of materials, the butt-welded joint did not show a significant difference in tensile strength and hardness values. However, compared with the basemetal, the AZ31B-O showed more outstanding mechanical properties than AZ31B-H24, and that is because H24 material lost the effect of work hardening during welding.

방전플라즈마 소결 공정을 이용한 WC-Co-B₄C 소재의 기계적 특성평가

이정한,박현국,Lee, Jeong-Han,Park, Hyun-Kuk 한국재료학회 2021 한국재료학회지 Vol.31 No.7

In this study, binderless-WC, WC-6 wt%Co, WC-6wt% 1 and 2.5 B₄C materials are fabricated by spark plasma sintering process (SPS process). Each fabricated WC material is almost completely dense, with a relative density up to 99.5 % after the simultaneous application of pressure of 60 MPa. The WC added Co and Co-B₄C materials resulted in crystalline growth. The WC with HCP crystal structure has respective interfacial energy (basal facet direction: 1.07 ~ 1.34 J·m^-2, prismatic direction: 1.43 ~ 3.02 J·m^-2) that depends on the grain growth direction. It is confirmed that the continuous grain growth, biased by the basal facet, which has relatively low energy, is promoted at the WC/Co interface. As abnormal grain growth takes place, the grain size increases more than twice from 0.37 to 0.8 um. It is found through analysis that the hardness property also greatly decreases from about 2661.4 to 1721.4 kg/mm², along with the grain growth.

『임원경제지』 「섬용지」와 문화재수리 표준시방서를 통해 본 전통조경공간 설계 시공방법

이정한,Lee, Jung-Han 한국전통조경학회 2019 한국전통조경학회지 Vol.37 No.4

본 연구는 과거 전통조경공간의 설계 및 시공과 오늘날 이를 유지 계승하기 위한 문화재수리 및 정비 등의 시공방법을 임원경제지 섬용지와 문화재수리 표준시방서를 토대로 서술방식, 전통조경 분야 관련 공정 추출, 시공방법을 상호 비교하였으며, 그 결과는 다음과 같다. 첫째, 임원경제지 섬용지와 문화재수리 표준시방서의 서술방식 및 전통조경 분야 관련 공정을 살펴본 결과 임원경제지 섬용지는 생활공간 전반의 시공방법을 집대성한 백과사전서로 구성요소별 시공방법의 사용처, 효과, 장·단점을 서술하고 구체적인 수치를 제시하여 전통조경공간 시공의 제도의 보급을 목적으로 삼았다. 문화재수리 표준시방서는 문화재 수리의 공정 전반을 제시하였으며, 문화재 수리 현장에서 참고할 수 있는 일종의 지침서 역할을 하고 있다. 이중 기초공사, 지붕공사, 조경공사, 담장공사 등이 전통조경분야에 적용될 수 있는 주요 항목으로 도출되었다. 둘째, 전통조경공간 시공방법을 기초공사와 지붕공사, 조경공사, 담장공사 등의 공정으로 구분하여 분석해보면, 기초공사는 지반을 다지는 과정을 반복하는 방식이다. 지붕공사 중 기와지붕 조성은 서까래 위에 산자를 설치하고 기와를 쌓았으며, 초가지붕은 볏짚을 여러 다발로 묶어 차례로 지붕을 덮었다. 석판지붕은 기와 대신 얇고 넓은 돌을 사용하였으며, 너와지붕은 나무판자를, 굴피지붕은 건조시킨 굴피를 여러 겹으로 깔아 조성하였다. 조경공사는 주로 잡석다짐을 통한 포장기법과 여러 단을 조성하고 상부에 석물이나 화초나 관목 등을 식재하는 화계 시공이 주를 이루고 있고 담장공사는 쌓는 재료에 따라 흙을 다져 쌓은 토담, 돌과 진흙을 사용한 돌담, 기와로 무늬를 만든 영롱담, 널판을 벽면으로 사용하는 판장 시공 등이 도출되었다. 셋째, 임원경제지 섬용지와 문화재수리 표준시방서의 시공방법을 비교해보면, 임원경제지 섬용지는 전통공간의 신규 조성을 위한 시공방법의 표준화에 중점을 두고, 문화재수리 표준시방서는 문화재 수리 현장의 다양성을 고려한 전반적인 시공 절차를 제공하여 시공의 범위 설정에 차이가 있다. 또한 과거 전통조경공간은 일상거주공간이었으나 오늘날에는 문화재로 지정된 곳으로서 기 구축된 시설의 유지관리 공정이 이루어지며, 관람환경 조성을 위한 시공방법이 추가되었다. 전통지식의 계승 차원에서 과거의 시공방식은 오늘날 문화재 수리에도 일정 부분 유사한 방법들이 확인되며, 일부 소재나 배합방식, 후대 추가된 시설의 구분, 효율적인 시공방식의 도입 등 전통기술을 재구성한 사례도 확인되었다. The purpose of this study is to examine the design & construction methods of the traditional landscape space of the past and the repair and maintenance of cultural heritages to maintain it today. To this end, the method of narrative description, process extraction and construction related to traditional landscaping were compared to each other based on the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages'. The results are as follows; First, to analyze at the description methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages' and related processes in the field of traditional landscaping. 『Imwongyeongjeji』 「Seomyongji」 was an encyclopedia of the overall construction method of the living space, describing the location, effect, and advantages and disadvantages of each component and presenting quantitative figures to institutionalize the construction of traditional landscaping spaces. 'Standard Specification for Repairing Cultural Heritages' presented the entire process of repairing cultural heritages, and it is becoming a kind of guide for reference at the site. Among them, foundation construction, roof construction, landscape construction, and fence construction were drawn as items that could be applied to traditional landscaping areas. Second, the traditional landscape space construction method was divided into the processes of foundation construction, roof construction, landscaping construction, and fence construction. Foundation construction is a way of repeating the process of land-tramping. During the construction of the roof, the tile-roofed building was built on top of the rafters and roofed with tiles. And thatched roof was made to a number of rice straws bundles to cover the roof one after the other. Instead of tiles, the stone roof was made of thin and wide stones, and the wooden boards were used for the single roof and the bark roof were constructed with many layers of dried corrugations. Landscape construction mainly consists of the Paving technique through tramping rubble and the construction of terraced flower by planting stone, plants, and shrubs on the top. According to the building materials, the wall construction was derived from the earth-stacked earthen wall, stone walls using stone and clay, marble walls made of tile patterns, and the construction of a board wall using a wood board as a wall. Third, comparing the construction methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages', 『Imwongyeongjeji』 「Seomyongji」 focuses on standardizing the construction methods to create a new traditional space. There is a difference in the setting of the scope of the 『Imwongyeongjeji』 「Seomyongji」 and the construction because 'Standard Specification for Repairing Cultural Heritages' provides the overall construction procedure considering the diversity of the cultural heritages. In addition, the traditional landscape space used to be a residential space in the past, but today, the maintenance process of the already established facilities as designated cultural heritages has been carried out, and construction methods have been added to create viewing conditions. In terms of the succession of traditional knowledge, some similar methods were found in the repair of cultural assets today, and some cases were also confirmed in the reconstruction of traditional technologies such as application of some materials or mix, separation of added facilities and introduction of efficient construction methods.

골격성 III급 부정교합 환자에서 하악골의 이동량과 교합평면의 변화에 따른 술 후 안정성

이정한,김성희,백영재,안경용,황대석,김용덕,김욱규,Lee, Jung-Han,Kim, Sung-Hee,Baek, Young-Jae,Ahn, Kyung-Yong,Hwang, Dae-Seok,Kim, Yong-Deok,Kim, Uk-Kyu 대한악안면성형재건외과학회 2012 Maxillofacial Plastic Reconstructive Surgery Vol.34 No.6

Purpose: The purpose of this study was to evaluate postsurgical facial hard tissue stability after orthognathic surgery with/without posterior impaction in skeletal class III malocclusion patients, and to evaluate the horizontal relapse tendency, according to changes in anteroposterior discrepancy and occlusal planes. Methods: Ninety patients, who had undergone orthognathic surgery in Pusan National University Dental Hospital, were enrolled in this study. Three main groups were classified as follows: Thirty patients underwent mandibular setback bilateral sagittal split ramus osteotomy (BSSRO) only (BSSRO group, BG); another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy with posterior impaction (posterior impaction group, PG); and another thirty patients underwent mandibular setback BSSRO and Le Fort I osteotomy without posterior impaction (non-posterior impaction group, NPG). Preoperative (T0), immediate postoperative (T1) and six-month follow-up period (T2) lateral cephalograms were taken, and various parameters were measured. The analyses were done by linear and angular measurements between T0-T1 and T1-T2, to evaluate postsurgical facial hard tissue stability. Results: Mean horizontal relapse rates were distributed from 11.81% to 19.08%, and there were significant postsurgical changes (0.52 mm~2.44 mm) at the B point in all 3 groups. But, there were no statistical differences on relapse rate among BG, PG and NPG patients. Conclusion: In this study, the postsurgical stabilities of BSSRO and Le Fort I osteotomy with/without posterior impaction in skeletal class III malocclusion patients were acceptable. There were no significant statistical differences in mandibular stability according to changes in anteroposterior discrepancy and occlusal planes.

이동식 정자의 설계 시공법 연구

이정한,Lee, Jung-Han 한국전통조경학회 2019 한국전통조경학회지 Vol.37 No.4

본 연구는 이동식 정자의 설계시공방법을 살펴보고자 문헌분석을 통해 조영 배경과 입지와 향의 설정, 규모와 구성, 재료, 시공방법 등을 분석함으로써 다음과 같은 결과를 도출하였다. 첫째, 이동식 정자는 곳곳에 펼쳐진 경승을 두루 유람하기 위해 고안된 정자로 산수를 즐기는 경험을 바탕으로 자신의 집을 소유하고 정자를 경영하는 것보다 이상적인 삶을 추구하는 방식이 반영된 창작물이었다. 둘째, 이동식 정자의 조영은 계절별, 시기별 경관을 때와 장소의 제한 없이 감상하고자 하는 의도로 조성되었으며. 풍류를 즐기기 위한 도구를 매번 옮겨야 하는 번거로움을 해소하고자 고안되었다. 셋째, 이동식 정자는 경관을 조망하기 용이한 곳을 향하여 입지와 향이 결정되며, 대부분 소규모로 조성되어 그 안에서 경관을 감상하거나, 바둑, 작시, 탄금 등을 위한 공간을 구분하였다. 또한 목재를 주로 사용하고, 하중을 저감시키기 위해 대나무나 짚, 유둔, 면포 등 가벼운 소재로 지붕과 벽면을 구성하였다. 시공방식은 결합과 해체가 용이하도록 하는 결구기법이 주로 사용되었으며, 선박이나 수레 상부에 정자를 조성할 경우에는 일반 정자의 목구조식 시공이 이루어졌다. 넷째, 일반 정자와 이동식 정자의 설계시공 특성을 비교해보면 이동식 정자는 조영목적상 경관의 관람이 용이하여 입지와 향의 설정에 제한이 없으나, 기동력을 고려하고, 구조적으로 하중을 견디기 위한 방안이 마련되어야 하며, 정자로서의 기능과 형태를 만족시켜야 하기 때문에 보다 엄격한 제도와 기법이 요구되었다. This study aims to examine the design and construction methods of movable Pavilions. Through the literature analysis, the setting up of the construction background, location and direction, size and composition, materials and construction methods were analyzed. The results are as follows; First, the movable pavilion is designed to enjoy a wide range of views. It was a creation that reflected the way in which the ideal life was pursued based on the experience of enjoying scenery rather than owning one's own house and running a pavilion. Second, the formation of movable pavilion was intended to enjoy the scenery by season without restrictions on time and place. It can also relieve the hassle of having to move tools to enjoy the wind every time. Third, the movable pavilion faces to a place with good scenery and determines its position and direction. Most of them were built on a small scale and divided the space for viewing the scenery, playing GO(Baduk), writing poems, and playing musical instruments. Also, wood was used mainly. To reduce the load, roofs and walls were constructed with light materials such as bamboo, straw, thick sheet of oil, and cotton cloth. The construction method was mainly used by the method of fastening for easy coupling and dismantling. When a building was constructed on the upper part of a ship or cart, the wooden structure of a regular pavilion was constructed. Fourth, when comparing the design and construction characteristics of ordinary pavilion and movable pavilion, the movable pavilion is easy to see for contrast purposes, so there is no limit to setting the location and direction. Instead, more stringent systems and techniques were called for, because as mobility forces should be considered, structurally measures to withstand loads, and they should satisfy their function and form as pavilion.

경추부 후종인대 골화증 1례에 대한 증례보고

이정한,박태용,조준기,김대중,김남수,신병철,송용선,고연석,Lee, Jeong-Han,Park, Tae-Yong,Jo, Joon-Ki,Kim, Dae-Joong,Kim, Nam-Su,Shin, Byung-Cheul,Song, Yung-Sun,Ko, Youn-Seok 척추신경추나의학회 2005 대한추나의학회지 Vol.6 No.1

Objective : There is hardly case report in oriental Medicine about the ossification of the posterior longitudinal ligament(OPLL). We experienced a patient(64-year-old male) with OPLL improved by oriental Medicine treatment, and we report it clinically. Methods : While the patient with OPLL was treated acupuncture, physical therapy, and CHUNA manual therapy, we evaluated the patient's symptoms and function by visual analogue scale(VAS), clinical criteria for evaluation of the cervical myelopathy by the japanese orthopaedic association(JOA Score) and cervical spine's range of motion(ROM) in three limes for the 17 days that were a hospitalization period. Results : VAS, JOA score and ROM in OPLL patient were improved. VAS in symptoms became lower from 10 to 5. JOA score increased from 12 points to 13 points. As for the ROM, it was improved in 30.1%. Conclusion : Oriental medicine treatment may be effective in conservative treatment of OPLL. We propose that more clinical studies and reaches are accomplished in oriental medicine.