http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유기첨가제에 의한 전기도금 니켈 - 구리 박막의 물성변화
이정주(Jungju Lee),홍기민(Kimin Hong) 한국자기학회 2005 韓國磁氣學會誌 Vol.15 No.3
We investigated the effects of organic additives on the properties of nickel-copper thin films prepared by electroplating. Compared with thin films fabricated by pure electrolyte only, the films utilizing organic additives show different crystalline orientations. With no alteration of plating conditions simply adding the organic materials changed the composition of copper and nickel. The concentration of nickel could be varied to 65-95% depending on the species and concentration of the additives. The change of material property has contributed to the increase or decrease of the magnetoresistance.
유영익(Youngik Yoo),이정주(Jungju Lee) 한국자동차공학회 2009 한국자동차공학회 학술대회 및 전시회 Vol.2009 No.11
본 연구에서는, NiTi 선형 작동기를 개발하기 위해 Ni-54.5 at.% Ti 합금의 양방향 형상기억효과를 실험적으로 연구하였다. 양방향 형상기억효과는 4가지의 연속적인 과정으로 구성된 압축 하중 사이클에 의해 유도 되었다: (1) 최대 변형까지 하중을 부하; (2) 제하; (3) 가열; (4) 냉각. 같은 외경을 갖고 있는 6가지의 시편 (실린더형 1개, 튜브형 5개)이 양방향 형상기억변형률과 양방향 회복력을 얻기 위해 사용되었으며, 각각의 작동기성능을 평가하였다. 양방향 형상기억 변형률은 최대 변형이 같을 때 7~8번의 사이클 후에 수렴하는 경향을 보였으며, 최대 변형 7%에서 양방향 형상기억 변형률은 시편의 형상에 관계없이 최대 값을 보였다. 양방향 형상기억 변형률과 양방향 회복력은 각각 최대 변형과 양방향 형상기억 변형률의 함수로 비례하여 증가하였으며 시편의 형상은 양방향 회복력에 영향을 주었다. 결론적으로, 본 연구에서 사용된 형상기억합금은 일방향 형상 기억효과에 의한 것과 마찬가지로 양방향 형상기억 효과에 의해 충분한 회복력을 발생시킬 수 있으며 일방향보다 쉽게 작동기에 적용할 수 있음을 보여주었다.
남정무,김병건,구자성,박종무,이정주,권오현,Nam, Jungmoo,Kim, Byung-Kun,Koo, Ja-Seong,Park, Jongmoo,Lee, JungJu,Kwon, Ohyun 대한임상신경생리학회 2007 Annals of Clinical Neurophysiology Vol.9 No.2
Spinocerebellar ataxia type 2 (SCA2) is characterized by progressive cerebellar ataxia and slow saccades. A 40-year-old woman presented with progressive gait disturbance and ataxia over 15 years. Neurologic examination revealed scanning speech, ataxia, and hyporeflexia. Brain CT showed diffuse atrophy of the cerebellum. Electronystagmography demonstrated slowed saccades with normal accuracy and delayed latency. The diagnosis of SCA2 was confirmed by the genetic test. Documentation of slow saccades may help differentiation among SCA subgroups.
박철휴(Chulhue Park),이정주(Jungju Lee),박현철(Hyunchul Park) 대한기계학회 2005 대한기계학회 춘추학술대회 Vol.2005 No.5
In this paper, we investigate the influence of edge elements for the passive damping system. Especially, the performance of the passive constrained layer damping is affected by two edge elements located onto the boundaries of the constraining layer, a piezo cover sheet. The purpose of these edge elements is to increase the transmissibility of the active action. However, we found these edge elements make a reduction the performance of the passive constrained layer damping (PCLD). To verify this fact, the axialbending- shear coupled equations of motion of the passive damping with edge elements are derived through the Hamilton's principle. The equations of motion are discretized by applying the finite element method. Numerical solutions of the analytical models are presented for the cantilevered beam in order to study the performance of the passive constrained layer damping with edge elements. The obtained mathematical model is validated experimentally. The developed analytical and experimental work provide an invaluable tool for designing and predicting the performance of the passive damping method.