http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이정일(Jungil Lee) 한국자동차공학회 2003 한국자동차공학회 Symposium Vol.2003 No.5
In order to test welding parts leakage, I had many trials. This article is one of the welding parts leak testing method. In this paper, I apllied gas sensor for examination of base assembly. For appling mass production system, several conditions must be considered deeply. In this testing method, I pay due regard to such factors as adherence of gas sensor, mixing method of alcohol and air, environment formation for mass production and make up Jig and fixture. Regarding the slight fever after welding, this testing method is better than air leak testing method. I wish further improvement in gas sensor and its application field.
이정일(Jungil Lee),전문수(Mun soo Chon) 한국자동차공학회 2012 한국자동차공학회 지부 학술대회 논문집 Vol.2012 No.10
Evaluation of the microstructure and mechanical properties of high strength Cu alloys fabricated by gravity casting and squeeze casting were investigated. A rapid cooling of casting was enhanced by pressure applied during solidification of Cu alloys, the cooling rate of casting was greater for high strength yellow brass alloy than other Cualloys. Grain size and the α dendrites of the squeeze cast products become refined to 1/2 level compared to gravity die castings. Squeeze cast high Strength yellow brass has about 10-20% higher yield and tensile strength and slighter decreased or nearly same elongation, compared to gravity die cast ones.
이정일(Jungil Lee),엄형식(Hyungsik Um),강선일(Sunil Kang),오화영(Hwayoung Oh),김정래(Jungrae Kim) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
화염유도로는 발사체로부터 배출되는 고온 고압의 연소 후류로부터 발사체 및 발사대 구조물을 보호하는 시설물로써 가스의 적절한 배출을 해야함과 동시에 냉각수를 이용하여 고온의 가스를 냉각시켜야 한다. 본 연구에서는 초음속유동에서 액적 분열을 가장 유사하게 모사할 수 있는 모델을 선정하였고, 이를 이용하여 초음속 자유류에서의 물분사를 포함한 2상 유동 해석을 수행하였다. 이를 통하여 물분사 유량에 따른 온도 분포 변화를 확인할 수 있었다. 한국형 발사체 발사대의 화염유도로의 3차원 형상을 바탕으로 비정상상태 해석을 통해 고온의 초음속 플룸에 대한 냉각수 분사의 영향에 대해 분석하였다. 화염유도로에 물분사 모델을 적용하여 노즐당 유량이 150 kg/sec일 때 벽면 온도가 1000 K 하강하는 것을 확인하였다. To protect the launch vehicle and launch complex structures, the flame deflector system requires the consideration of flame deflection and exhaust gas cooling with water spraying. In this study, three dimensional simulation of KSLV-Ⅱ flame deflector system was conducted with transient analysis. For the analysis of phenomena in supersonic compressible free stream flow with water spray, the liquid breakup model and two phase flow model were adopted with reasonable parameters values derived. Finally, based on the present results, we evaluated the effect of water spraying in rocket exhaust plume. We found that the wall temperature decreased 1000 K when 150 ㎏/sec water spray compared to no water spray.
비주기적 실시간 데이터 전송을 위한 IEEE 802.15.4 망의 동적 백오프 조정 기법에 대한 연구
이정일(JungIl Lee),김동성(Dong-Sung Kim) 제어로봇시스템학회 2008 제어·로봇·시스템학회 논문지 Vol.14 No.3
In this paper, a dynamic backoff adjustment method of IEEE 802.15.4 is proposed for time-critical sporadic data in a noisy factory environment. For this, a superframe of IEEE 802.15.4 is applied to a real-time mixed data (periodic data, sporadic data, and non real-time message) transmission in factory communication systems. To guarantee a channel access of real-time sporadic(non-periodic) data, a transmission method using the dynamic backoff is applied to wireless control networks. For the real-time property, different initial BE, CW parameters are used for the dynamic backoff adjustment method. The simulat-ion results show an enhancement of the real-time performance of sporadic emergency data. The proposed method provides the channel access of real-time sporadic data efficiently, and guarantee real-time transmission simultaneously within a limite-d timeframe.
이정일(Jungil Lee),엄형식(Hyungsik Um),강선일(Sunil Kang),오화영(Hwayoung Oh) 한국추진공학회 2015 한국추진공학회 학술대회논문집 Vol.2015 No.11
화염유도로는 발사체로부터 배출되는 고온 고압의 연소 가스를 안전하게 배출시키는 시설물로써 발사체 및 발사대 주위의 구조물을 보호하는 역할을 한다. 고온 고압의 연소 가스가 배출되는 만큼 냉각수를 이용하여 연소 가스를 냉각시키는 시설을 갖추어야 한다. 연소 노즐에서 배출되는 수증기, 이산화탄소, 일산화탄소 뿐만 아니라 냉각수 분사에 의해 수증기가 증가함에 따라 복사열전달은 화염유도로 시스템 설계에 중요한 변수가 된다. 이번 연구에서는 H₂O-CO₂-CO 혼합가스에 대한 복사열전달 모델을 선정하였고 기존에 연구된 SNB 모델의 결과와 비교하였다. 총 방사율 기준으로 약 5% 이내의 오차를 보여 모델의 타당성을 확인할 수 있었다. 한국형 발사체 발사대의 화염유도로 형상을 바탕으로 복사열전달 모델을 고려한 비정상상태 해석을 통해 냉각수 분사에 의한 벽면 온도를 예측하였다. 냉각수 분사를 하지 않을 경우 약 3000 K의 벽면 온도가 냉각수 분사를 할 경우 약 1000 K 하강하는 것을 확인하였다. To protect the launch vehicle including complex structures, the flame deflector system should be equipped with flame deflection and water injection system for exhaust gas cooling. Radiative heat transfer is an important factor for a flame deflector system design because of two reasons: 1) the plume gas includes three radiating species (H₂O, CO₂ and CO), 2) a large amount of water vapor is generated by evaporation of injected cooling water. The radiative heat tranfer model for H₂O-CO₂-CO mixture is compared with SNB model for validation. As results, the total emissivity is well matched within roughly 5% error between two models. Finally three dimensional simulation of KSLV-II flame deflector system is conducted with transient analysis based on this radiation model. The wall temperature decreases 1000 K for the water injection case compared with no water injection.