http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김정섭,오상광,김기완,이우일,Kim, Jeong-Seob,Oh, Sang-Kwang,Kim, Ki-Wan,Lee, Wu-Il 대한전자공학회 1989 전자공학회논문지 Vol. No.
밀착형 1차원 영상감지소자로서 팩시밀리에 사용될 광도전막을 사일랜듸 글로방전 분해법으로 제작하였다. 우선 rf전력, 사일랜유량, 분위기 가스압, $H_2/SiH_4$비 및 기판온도의 증착조건에 따른 단층광전도막의 전기적 및 광학적특성을 조사하였다. 이 단층구조 영상감지막은 광전감도 0.85와 100lux 조도하에서 $I_{ph}/I_d=100$을 나타내었다. 그러나 이러한 단층박막은 양 전극으로 부터의 캐리어주입으로 인해 큰 암전류도 0.2nA 이하를 나타내었다. 또한 다층막은 단층막에 비해 단파장 가시광영역이 보상되어 팩시밀리용 1차원 영상감지소자에 사용될 만한 결과를 나타내었다. Contact-type linear image sensors for facsimile have been fabricated by means of rf glow discharge decomposition method of silane. The dependence of their electrical and optical properties on rf power, $SiH_4$ flow rate, ambient gas pressure, $H_2SiH_4$ ratio and substrate temperature are described. The a-Si:H monolayer demonstriated photosensitivity of 0.85 and $I_{ph}/I_d$ ratio of 100 unger 100 lux illumination. However, this monolayer has relatively high dark current due to carrier injection from both electrodes, resulting in low $I_{ph}/I_{dd}$ ratio. To suppress the dark current we have fabricated $SiO_2/i-a-Si:H/p-a-Si:H:B$ multilayer film with blocking structure. The photocurrent of this multilayer sensor with 6 V bias became saturated ar about 20nA under 10 lux illumination, while the dark current was less than 0.2 nA. Moreover, the spectral sensitivity of the multilayer film was enhanced for short wavelength visible region, compared with that of the a-Si:H monolayer. These results show that the fabricated photocon-ductive film can be used as the linear image sensor of the facsimile.
${\Omega}$/PC 그래픽 보오드를 이용한 집적회로 설계용 레이아웃 에디터의 개발
정갑중,장기동,정호선,이우일,Jeong, Gab-Jung,Jang, Ki-Dong,Chung, Ho-Sun,Lee, Wu-Il 대한전자공학회 1989 전자공학회논문지 Vol. No.
본 논문에서는 IC Mask Layout을 위한 2차원 그래픽스 에디터 KUIC_LED(kyungpook national university intelligent CAD_layout editor)를 개발하였다. KUIC_LED는 ${\Omega}$/PC/AT상에서 동작하고 Layout에 필요한 60여가지의 다양한 기능들을 제공한다. 본 시스템은 C Language와 Assembly Language로 작성 되었다. This paper describes the KUI-LED (Kyungpook national University Intelligent CAD-Layout EDitor) which is a 2-dimensional graphics editor for IC mask layout. This system runs of IBM PC/AT with the ${\Omega}$/PC graphics board. It offers a sufficient set of facilities to do most kinds of layout. KUIC-LED is written in 'C' and 'Assembly' language.
컬러센서를 위한 $TiO_{2}$/Se : Te 이종접합의 스펙트럼 응답
우정옥,박욱동,김기완,이우일,Woo, Jung-Ok,Park, Wug-Dong,Kim, Ki-Wan,Lee, Wu-Il 한국센서학회 1993 센서학회지 Vol.2 No.1
컬러센서를 위한 $TiO_{2}$/Se : Te 이종접합을 고주파 반응성 스퍼터링법과 진공증착법을 이용하여 제작하였다. 제조된 $TiO_{2}$ 막형성의 최적조건은 $1000{\AA}$의 $TiO_{2}$ 두께에서 고주파전력 120 W, 기판온도 $100^{\circ}C$, 산소농도 50% 및 분위기압 50 mTorr였다. 이 때 광투과율은 파장 550 nm에서 85%, 저항률은 $2{\times}10^9{\Omega}{\cdot}cm$, 굴절률은 2.3이었다. 제조된 $TiO_{2}$막은 직접천이형 에너지 밴드구조를 가지며 광학적 밴드갭은 3.58 eV였다. 제조된$TiO_{2}$막을 $400^{\circ}C$에서 30분간 열처리함으로써 광투과율이 파장 $300{\sim}580$ nm범위에서 $0{\sim}25%$까지 개선되었다. 또한 화학양론적 조성비를 조사하기 위하여 AES 분석을 한 결과 Ti 및 0의 조성비는 1 : 1.7로 나타났다. 한편 Se : Te 막형성의 최적조건은 $190^{\circ}C$에서 1분간 열처리했을 때였다. 이러한 조건으로 제조된 Se : Te막의 광학적 밴드갭은 1.7 eV였으며 육방정계구조의 (100) 방향 및 (110) 방향으로 Se : Te 막이 결정화됨을 알 수 있었다. 1000 lux의 조도에서 Se : Te막의 광전변환률은 0.75였다. 또한 Se에 Te를 첨가함으로써 장파장영역의 분광감도가 향상되었다. $TiO_{2}$/Se : Te 이종접합의 분광감도는 가시광 전영역에서 비교적 넓은 분광감도를 나타내었으며, 특히 청색영역에서 a-Si박막보다 우수한 분광감도를 나타내었다. $TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.