http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이우람,이춘규,Lee, Woo-Ram,Lee, Chun-Kyu 한국금형공학회 2022 한국금형공학회지 Vol.16 No.1
A lot of research is being done on metal materials to improve the lifespan of molded parts. As a result, excellent mold materials have been developed that withstand high hardness at high temperatures and frictional heat generated from high-speed cutting. In this study, the press mold life of powder high-speed tool steel and general high-speed tool steel was compared. Powdered high-speed steel is composed of alloying elements such as tungsten, maldividene, cobalt, chromium, and vanadium in steel, which improves wear resistance compared to high-hardness and high-speed tool steels. The mold parts of both steel types were manufactured in the same way from heat treatment to machining, and the powder high-speed tool steel was 66HRC and the high-speed tool steel was 61HRC. As a result of the experiment, it was observed that the number of punching of powder high-speed tool steel was improved by 40-50%, and powder high-speed tool steel had fewer impurities, uniform texture, and excellent surface structure. It has a microscopic structure.
저조도 환경에 적합한 이색도 반사 모델을 이용한 색 복원 기법
이우람(Lee, Woo-Ram),전우경(Jun, WooKyoung),전병민(Jun, Byoung-Min) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.12
미약한 광원 및 조명이 존재하는 환경에서 획득된 저조도 영상에는 많은 색 왜곡이 발생한다. 이러한 색 왜곡은 해당 비전 시스템의 성능 저하를 발생시킬 수 있는 원인이 된다. 따라서 저조도 영상의 원래 색을 찾는 과정은 비전 시스템의 성능 향상을 위한 중요한 과정이다. 이를 위해 본 논문에서는 저조도 영상을 대상으로 한 이색도 반사 모델 기반의 색 복원 기법을 제안한다. 제안한 기법은 이색도 반사 모델을 기반으로 저조도 영상을 확산 반사와 정반사의 영향을 받는 영역으로 구분한다. 이후 각 영역에 미치는 조명 효과를 제거하기 위하여 grey world 기법과 MSRCR 기법을 적용한다. 마지막으로, 두 기법을 적용하여 생성된 결과 영상에 대해 위치별 가중치를 이용하여 두 영상을 조합하여 최종 결과 영상을 생성한다. 본 논문에서는 성능 평가를 위하여 저조도 합성 영상을 사용하였고, 유클리드 거리 및 각 오차를 성능 평가 요소로 활용하였 다. 또한 기존에 연구되었던 다양한 기법과의 성능 비교를 수행하여 성능 평가의 객관성을 확보하였다. 다양한 영상 셋을 이용한 실험에서 제안한 기법은 기존의 기법들에 비해 두 성능 평가요소 관점에서 GTD 영상에 가까운 색 복원이 가능함을 보였다. Color distortion of the dark images acquired under a low-light-level environment with a weak light source can be cause of the performance decreation of various vision systems. Therefore, recovering the original color of the images is an important process for enhancing the performance of the system. For this, this study proposes a color restoration method using a dichromatic reflection model. This paper assumes that the dark images can be classified into two parts affected by specular or diffuse reflection. Two different color constancy methods were then applied to the images to remove the effects of each reflection and two images were created as a result. The resulting images produced a one color-corrected image by combining with different weights according to the position in the images. For the performance evaluation, this paper used a synthesized image, and considered the Euclidean distance and angular error as an evaluation factor. In addition, a performance comparison was performed with the existing various color constancy method to achieve the objectivity of evaluation. The experimental results showed that the proposed method can be a more suitable solution for color restoration than the existing method.
이우람(Lee, Woo-Ram),손상희(Son, Sang-Hee),정원섭(Chung, Won-Sup) 한국전기전자학회 2010 전기전자학회논문지 Vol.14 No.2
본 논문에서는 대기전력을 줄일 수 있는 Green Mode Power IC 회로를 설계하였다. 이 회로는 switch mode power supply(SMPS)을 구동하기 위한 PWM 기능을 가지고 있으며, 불필요한 소비전력을 제거하기 위해 burst mode와 skip mode 구간을 만들고 대기전력을 낮출 수 있도록 외부의 Power MOSFET에 의해 제어된다. 제안한 회로는 KEC 30V-High Voltage 0.5um CMOS process를 이용하여 시뮬레이션 하였다. 회로 내부는 크게 voltage regulator 회로, voltage reference 회로, UVLO(Under Voltage Lock Out)회로, Ibias 회로, green 회로, PWM 회로, OSC 회로, protection회로, control 회로, Level shift&Driver 회로로 구성되어 있다. 시뮬레이션 결과로부터 회로 동작 시 각 블록의 소비전류를 측정하여 확인한 결과 블록 별 전류총합이 1.29mA이었고, 이 값은 목표 설계치인 1.3mA을 충족시킴을 입증하였다. 이 값은 기존 IC의 소비전류보다 1/2이상 줄어든 값이며, 대기모드로 동작할 경우는 전력소비를 1W 미만까지 줄일 수 있었다. In this paper, Green Mode Power IC is designed to reduce the standby power. The proposed and designed IC works for the Switch Mode Power Supply(SMPS) and has the function of PWM. To reduce the unnecessary electric power, burst mode and skip mode section are introduced and controlled by external power MOSFET to diminish the standby power. The proposed IC is designed and simulated by KEC 30V-High Voltage 0.5um CMOS Process. The structure of proposed IC is composed of voltage regulator circuit, voltage reference circuit, UVLO(Under Voltage Lock out) circuit, Ibias circuit, green circuit, PWM circuit, OSC circuit, protection circuit, control circuit, and level & driver circuit. Measuring the current consumption of each block from the simulation results, 1.2942 mA of the summing consumption current from each block is calculated and ot proved that it is within the our design target of 1.3 mA. The current consumption of the proposed IC in this paper is less than a half of conventional ICs, and power consumption is reduced to the extent of 1W in standby mode. From the above results, we know that efficiency of proposed IC is superior to the previous IC.
폴리머 필름을 이용한 건식 레이저 쇼크 피닝 공정 설계에 대한 연구
이우람(Lee, Woo Ram) 한국전시산업융합연구원 2015 한국과학예술융합학회 Vol.22 No.-
레이저 쇼크 피닝 공정은 물로 보호되는 금속 재료에 플라즈마를 발생시켜 이로 인한 충격파로 재료 표면에 압축 잔류 응력을 생성시키는 표면 처리 공정이다. 본 연구에서는 사용하는 일반적인 레이저 쇼크 피닝 공정과는 달리 폴리머 필름을 보호층으로 사용할 때의 피닝 효과를 연구하였다. 피닝 효과의 정량화를 위해 레이저에 의해 건식 보호층에서 생성되는 충격파의 정량화를 위한 모델링을 수행하였다. Nd:YAG 레이저를 이용하여 티타늄 합금(Ti6Al4V) 표면에 레이저 피닝 공정을 수행하였고, 일반적인 물을 보호층으로 사용했을 때 대비하여 재료 인장 강도, 경도, 압축 잔류 응력 등의 기계적 특성을 분석하였다. 기존 공정(물 구속층) 에 비해 인장 강도에서 약 3 %, 재료 표면 기준 깊이 방향으로 경도 6 %, 압축 잔류 응력 약 33 % 가량 향상되었다. Micro shock waves are induced in laser shock peening and their effect on metal samples is presented. Laser shock peening produces maximized internal compressive stress on metal surfaces. In our study, the effect of laser shock peening on a titanium alloy was modeled using different confinements. Both liquid and solid confinement could be applied to laser shock peening and solid confinement provided a dry laser shock process, which has the advantage of a corrosion-free effect. When a different confinement was applied to laser shock peening, a different peening effect would be expected. The main effect on different confinements was a change of the impedances to confine a shock wave from a plasma using Ti6Al4V. The experimental results be applied to measure the micro shock waves, the tensile test, the hardness and residual stress of the samples were evaluated. The tensile test hardness test and residual stress were improved about average 3, 6 and 33 % in the laser shock peening process.
이우람(Lee, Woo-Ram),황동국(Hwang, Dong-Guk),박종천(Park, Jong-Cheon),전병민(Jun, Byoung-Min) 한국산학기술학회 2008 한국산학기술학회 학술대회 Vol.- No.-
본 논문은 영상 내의 얼굴에 존재하는 기하학적 정보에 기반한 얼굴 검출을 제안한다. 영상안에 존 재하는 피부색 영역과 헤어색 영역을 이용하여 얼굴과 헤어의 후보영역을 생성한다. 그 후 이러한 영 역들의 기하학적인 정보를 이용하여 여러 얼굴 후보영역들 중 실제 얼굴 영역을 찾는다. 제안한 알고 리즘은 다양한 종류의 영상을 사용하여 성능을 평가하였으며 실험결과 대부분의 영상에서 높은 검출 률을 보였다.
Simplified Horn 기법을 이용한 자연 영상에서의 얼굴 영역 검출
이우람(Lee, Woo-Ram),황동국(Hwang, Dong-Guk),전병민(Jun, Byoung-Min) 한국산학기술학회 2008 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 조명의 변화에 강건한 얼굴 검출 알고리즘을 제안한다. 영상내의 조명 성분을 줄이기 위하여 컬러 일관성(color constancy) 알고리즘 중 Simplified Horn 기법을 적용한 후 색 정보를 이용하 여 얼굴 후보영역을 결정한다. 이렇게 결정된 얼굴 후보영역 중 얼굴영역과 헤어영역의 여러 기하학적 인 정보를 이용하여 실제 얼굴 영역을 판단한다. 제안한 알고리즘은 다양한 조명 성분을 갖는 여러 영상에서 테스트 되었으며 높은 검출률을 보였다.
이우람(Woo-Ram Lee),황동국(Dong-Guk Hwang),전병민(Byoung-Min Jun) 한국엔터테인먼트산업학회 2012 한국엔터테인먼트산업학회 학술대회 논문집 Vol.2012 No.11
광원의 영향이 미약한 저조도 환경에서 획득된 영상은 장면 및 물체의 정보를 제대로 표현하지 못하기 때문에 색 복원 기법을 적용한다. 하지만 색 복원 기법의 성능의 객관적인 평가는 물체의 원래 색을 포함하고 있는 기준 데이터(Ground truth data)의 부재로 인하여 수행의 어려움이 뒤따른다. 본 논문에서는 색 복원기법의 정량적인 성능 평가를 위한 저조도 합성 영상 생성 기법을 제안한다. 제안한 기법은 Barnard 데이터 셋의 스펙트럼 데이터들을 영상 형성식을 이용하여 합성하였고 잡음에 약한 저조도 영상의 특성을 고려하여 영상에 잡음을 추가하였다. 제안한 합성 기법을 통해 다양한 반사계수를 포함하고 있는 저조도 영상의 생성이 가능했으며, 각각이 결과 영상에 대한 기준 데이터 획득이 가능한 장점을 가진다.