http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이영철,이두호,김종기,소찬영,최정길,홍준표 ( Young Chul Lee,Doo Ho Lee,Jong Ki Kim,Chan Young So,Jeong Kil Choi,Chun Pyo Hong ) 한국주조공학회 1997 한국주조공학회지 Vol.17 No.5
N/A An integrated computer program consisting of a pre-processor, main solver, and post-processor was developed for the design of large steel castings. The pre-processor, based on the AutoCAD, enables the user to produce approval drawings, casting design drawings and mesh diagrams in sequence using a personal computer. In the main solver, two numerical models were employed; one models the fluid flow during mold filling, and the other models the heat transfer and solidification. The post-processor can be used to present simulation results such as flow pattern, mold filling sequences, solidification times, temperature gradients and location of shrinkage defects by color graphics. In order to validate the applicability of the present integrated program, a series of experiments on simple-shaped steel castings were carried out. After the validation of the present model, it was applied to the casting design of the large steel anchor of an SC42 alloy. Various solidification parameters such as a temperature distribution and a solidification time in the casting and the mold were compared with those obtained experimentally. Simulated results predicting shrinkage defects were in good agreement with those obtained experimentally. It was found that the present method can be successfully applied to the quantitative casting design for complex-shaped large steel castings. (Received June 4, 1997)
김영재(Young Jae Kim),이영철(Young Chul Rhee),이만길(man Kill Lee),차호(Ho Cha),정영채(Young Chae Jung) 대한소화기학회 1987 대한소화기학회지 Vol.19 No.1
N/A Comparative analytic review on clinical, endoscopic and histopathological findings was done in 13 cases of young age (under 29), 446 cases of mid age (30~69) and 39 cases of old age (above 70) stomach cancer who were visited Department of Internal Medicine of Masan Koryo General Hospital from March 1981 to July 1985. The following results were obtained: The peak of age incidence was the 5th decade amounting to 36.8%. The ratio between male and female was 2.6:1. The main chief complaint of each group was epigastric pain and it was followed by epigastric fullness. The most patient had the duration of symptom from 3 months to 6 months. For old-age group, mid-age group, major site of lesion in the antrum, meanwhile body for young-age group. The most frequent type of gastric cancer was type III in each group by Borrmanns classification. For each group, adenocarcinoma was major cases in the view of histopathological findings, and incidence of well differentiated type adenocarcinoma were lower in young-age group than others.
Biomass 유래 퓨란계 단량체를 이용한 폴리에스터의 중합 및 특성 연구
정용석(Yong Seong Chung),이영철(Young Chul Lee),서강진(Kang Jin Seo),김명준(Myeong Jun Kim),정지혜(Ji Hea Jeong),노시태(Si Tae Noh) 한국고분자학회 2011 폴리머 Vol.35 No.6
바이오매스에서 유래된 2,5-dihydroxymethylfuran(DHMF)을 KMnO4 산화반응으로 furan-2,5- dicarboxylic acid(FDCA)를 합성하였다. 합성한 FDCA와 다이올류를 에스테르화 반응과 축중합 반응을 진행시 켜 폴리에스터를 중합하였다. 폴리에스터는 NMR을 통해 조성을 분석하였고 DSC와 TGA를 통해 열적특성을 분 석하였다. 합성된 폴리에스터의 고유점도는 0.78∼1.2 dL/g으로 상용화된 poly(ethylene terephthalate)(PET) 와 비슷하였다. 다이올의 길이가 증가할수록 Young`s modulus와 strength는 낮아지고 elongation-to-break는 높아지는 경향을 확인하였다. 합성한 poly(ethylene furandicarboxylate)(PEF)의 Young`s modulus는 3551 MPa, strength는 103 MPa로 상용화된 PET와 비슷하였다. Furan-2,5-dicarboxylic acid (FDCA) was synthesized by KMnO4 oxidation of 2,5-dihydroxymethylfuran( DHMF) derived from biomass. Polyesters were synthesized by esterification and polycondensation of FDCA with various diols(ethane-1,2-diol, propane-1,3-diol, butane-1,4-diol, hexane- 1,6-diol, decane-1,10-diol). The composition of polyesters was characterized by using 1H NMR. Thermal properties of the polyesters were characterized by DSC and TGA. Intrinsic viscosities(IV) of the polyesters were measured to be 0.78∼1.2 dL/g comparable with IV of commercial poly(ethylene terephthalate)(PET). As the chain lengths of diols increased, Young`s modulus and strength decreased and elongation-to-break generally increased. Young`s modulus and strength of the polyesters were measured to be 3551 MPa and 103 MPa, respectively, comparable with commercial PET.
재사용 분할 시스템에서 성능 개선을 위한 핸드오프 알고리즘
이영철,김민홍,임재성,김하진,Lee, Young-Chul,Kim, Min-Hong,Lim, Jae-Sung,Kimn, Ha-Jine 한국정보처리학회 2000 정보처리논문지 Vol.7 No.2
마이크로셀룰러 네트워크에서 재사용 분할 시스템은 고속 단말의 핸드오프 증가로 시스템 성능이 저하되는 단점을 갖는다. 따라서 본 논문에서는 마이크로셀을 이용한 재사용 분할 시스템의 성능을 개선하기 위하여 내부셀과 외부셀의 트래픽 분포 비율에 따라 고속과 저속 단말의 자원을 관리하는 핸드오프 알고리즘을 제안한다. 또한 고속과 저속 단말의 성능을 분석하고 컴퓨터 시뮬레션을 통해서 핸드오프 확률, 호 절단 확률에 대하여 RPS와 비교 평가한다. The reuse partitioning system in microcellular networks are dropped performance of system because of increase hand-off of high-speed terminal. In this paper, we propose hand-off algorithm to improve the performance of reuse partitioning system using microcell according to the ratio of traffic distribution between innercell and outercell from resource management of high-speed and slowspeed terminal. Also, we compare to RPS and evaluate the teletraffic performance analysis of high-speed and slow-speed terminal through computer simulations that we derive the hand-off probability, call dropping probability.
개선된 조건 합 가산기를 이용한 $54{\times}54$-bit 곱셈기의 설계
이영철,송민규,Lee, Young-Chul,Song, Min-Kyu 대한전자공학회 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.1
개선된 조건 합 가산기를 이용한 저전력 고속 $54{\times}54$-bit 곱셈기를 설계했다. 지연시간을 감소시키기 위해, Booth's Encoder 없이 높은 압축 율을 갖는 압축기들과 Carry 발생블록을 분리시킨 108-bit 조건 합 가산기를 제안하였다. 또한, 지연시간과 전력소모를 최적화하기 위해 패스 트랜지스터로직을 사용한 설계기법을 제안하였다. 제안된 곱셈기는 기존 곱셈기구조에 비해 약 12%의 지연시간과 5%의 전력소모가 감소하였으며, 0.65${\mu}m$ CMOS(Single-poly, triple-metal)공정을 사용하여 $6.60{\times}6.69mm^2$의 칩 크기와 공급전압 3.3V에서 13.5ns의 지연시간을 갖는다. In this paper, a $54{\times}54$-bit multiplier based on a improved conditional sum adder is proposed. To reduce the multiplication time, high compression-rate compressors without Booth's Encoding, and a 108-bit conditional sum adder with separated carry generation block, are developed. Furthermore, a design technique based on pass-transistor logic is utilized for optimize the multiplication time and the power consumption by about 5% compared to that of conventional one. With $0.65{\mu}m$, single-poly, triple-metal CMOS process, its chip size is $6.60{\times}6.69\;mm^2$ and the multiplication time is 135.ns at a 3.3V power supply.
이영철,Lee, Young-Chul 한국논리학회 2008 論理硏究 Vol.11 No.2
철학적 문제들의 발생은 언어의 논리에 대한 오해에 기인한다는 신념에 따라, 비트겐슈타인의 철학적 탐구는 언제나 언어의 논리 문제를 중심으로 전개되었다. 그의 철학적 작업은 실로 논리적 탐구였다고 할 수 있다. 그러나 그가 생각한 언어의 논리란 무엇인가? 그것은 처음부터 언어의 문법으로서 이해되었지만, 이 이해에는 그의 전후기에 중요한 변화가 있었다. 초기에 그는 언어의 논리를 이상적 표기법에서 실현되는 진리 함수적 구문론과 같은 것으로 이해했으나, 후기에 그는 언어의 논리를 언어놀이의 다양한 언어 사용 규칙들로서 보는 데로 나아갔다. 그것은 논리를 모든 가능성이 미리 규정되어 있는 매우 엄격하고 이상적인 하나의 보편적 문법 체계로서 보는 데서부터, 논리를 미리 생각되지 않은 가능성에 열려 있고 언어놀이들에 특유한 다양한 언어 사용 규칙들로 이루어진 문법 체계들로서 보게 되는 변화이다. 이 글은 그의 전후기 논리관의 상이한 핵심과 그 변화 이유를 다루고 있다. 특히 논리의 자율성과 필연성에 대한 그의 전후기의 관점 변화가 다루어진다. In accordance with his belief that philosophical problems arise from misunderstandings of the logic of our language, Wittgenstein's philosophical investigations were always focused on the problems of logic of language. Indeed, it can be said that his investigations were logical investigations. But what was the logic as conceived by him? He regarded logic as grammar from the beginning, but between his two different philosophical periods, there were important changes in his conceptions of grammar. In his earlier period, he understood the logic of language as the truth-functional syntax realizable in an ideal notation, while in his later period he regarded logic as the rules of language-use in various language games. It was a change from viewing logic as an ideally strict and universal system in which every logical possibilities are determined to viewing logic as an open system of non-strict grammatical rules specific to each language game. This paper deals with the gists of his earlier and later views on logic and the reasons for the change of his views, including specifically the reasons for the change of his views concerning the autonomy and necessity of logic as grammar.
21세기 신 에너지 가스 하이드레이트 연구 및 기술개발 현황 : 국내의 중장기 개발 방향
이영철,백영순,조병학,박기환,류병재,Lee Young Chul,Baek Young Soon,Cho Byoung Hak,Park Ki Whan,Ru Byong Jae 한국석유지질학회 1999 한국석유지질학회지 Vol.7 No.1
에너지 자원의 빈국인 한국은 에너지 자원의 기본적인 사용량 중에서 절대적인 양을 차지하는 석유 및 천연가스를 $100{\%}$수입에 의존하고 있다. 정부가 유사시 즉각적으로 실시하여야 할 중요한 역할 중의 하나가 이와 같은 유용한 에너지 자원을 다양하게 확보하는 것이다. 가스 하이드레이트는 천연가스와 다론 형태의 에너지로서 그 매장량이 해양이나 영구동토지역 등 전세계적으로 분포되어 있으므로 가까운 미래의 천연가스 대체 자원으로서 주목을 받고 있다. 특히 한반도 주변의 동해에 많은 양의 가스 하이드레이트가 매장되어 있을 것으로 기대된다 따라서 이 논문에서는 국내외 연구 및 기술개발 동향을 검토하여 탄성파 탐사를 통한 해석, 가스 하이드레이트의 특성 및 물리적인 물성, 그리고 가스 하이드레이트의 활용 기술 등에 관련된 국내의 중장기적인 가스 하이드레이트의 기본적인 연구 및 기술개발에 대하여 전체적인 프로젝트의 개요를 설명하였다. Korea, an energy-resources-poor country, imports $100{\%}$ of its, oil and, natural gas supply, which accounts for the greater part of its total primary requirements. One of the important task of the government is diversification of available energy resources such as oil and natural gas. Natural gas hydrate, which is non-conventional types of natural gas, distributes worldwide, especially in marine and permafrost. It would become a target of natural gas resources in the near future. Especially sigrificant amount of hydrates are expected to be located in the East Sea around Korea Peninsular. This paper describes about a multi-year overall project framework of basic research and technological development of natural gas hydrate in Korea focused on the interpretation of the seismic survey, the characteristics and physical properties of the natural gas hydrate, and the utilizable technology of natural gas hydrates from the status of research and development of the world.
Shallow Trench Isolation 공정에서 수분에 의한 nMOSFET의 Hump 특성
이영철,Lee, Young-Chul 한국정보통신학회 2006 한국정보통신학회논문지 Vol.10 No.12
In this parer, hump characteristics of short-channel nMOSFETs induced by moistures of the ILD(inter-layer dielectric) layer in the shallow trench isolation (STI) process are investigated and the method for hump suppression is proposed Using nMOSFETs with various types of the gate and a measurement of TDS-APIMS (Thermal Desorption System-Atmospheric Pressure ionization Mass Spectrometry), hump characteristics were systematically analyzed and the systemic analysis based hump model was presented; the ILD layer over poly-Si gate of nMOSFET generates moistures, but they can't diffuse out of the SiN layer due to the upper SiN layer. Consequently, they diffuses into the edge between the gate and STI and induces short-channel hump. In order to eliminate moisture in the ILD layer by out-gassing method, the annealing process prior to the deposition of the SiN layer was carried out. As the result, short-channel humps of the nMOSFETs were successfully suppressed. 본 논문은 shallow trench isolation (STI) 공정에서 ILD (inter-layer dielectric) 막의 수분에 의해 야기되는 단 채널 (short-channel) nMOSFET의 hump 특성의 원인을 분석하고 억제 방법을 제안하였다. 다양한 게이트를 가지는 소자와 TDS-APIMS(Thermal Desorption System-Atmospheric Pressure Ionization Mass Spectrometry) 측정을 이용하여 hump 특성을 체계적으로 분석하였고, 분석을 바탕으로 단 채널 hump모델을 제안하였다. 제안된 모델에 의한 단 채널 nMOSFET의 hump 현상은 poly-Si 게이트 위의 ILD 막의 수분이 상부의 SiN 막에 의해 밖으로 확산되지 못하고 게이트와 STI의 경계면으로 확산하여 발생한 것이 며, 이를 개선하기 위해 상부의 SiN 막의 증착 전 열공정을 통해 ILD 막의 수분을 효과적으로 배출시킴으로써 hump 특성을 성공적으로 억제하였다.