http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승식,백성용,Lee, Seung Sik,Back, Sung Yong 한국강구조학회 2006 韓國鋼構造學會 論文集 Vol.18 No.5
본 논문에서는 부재의 lay-up에 상관없이 사용할 수 있으며 복합재료 부재의 거동에 중요한 영향을 미치는 포아송 효과를 고려할 수 있는 확장된 복합재료 보이론을 제시하고, 확장된 보이론을 바탕으로 축방향 압축력을 받는 복합재료 박판부재의 좌굴식을 유도하였다. 유도된 좌굴식을 검증하기 위해서 기존에 발표된 인발성형 vinylester/E-glass 및 polyester/E-glass T형 부재의 휨-비틀림 좌굴실험결과와 vinylester/E-glass H형 부재의 휨 좌굴실험결과를 수치예제로 사용하였다. 이론적 좌굴하중과 실험적 좌굴하중 및 유한요소해석 결과와의 비교를 통하여 본 연구에서 제안된 좌굴식이 인발성형부재의 좌굴하중을 7% 정도 안전측으로 예측하는 것을 알 수 있었다. In the present paper, an extended composite beam theory that has no restriction on the lay-up and can account for Poisson effect which is significant for composite materials is proposed. Buckling equations for composite thin-walled members which are subjected to axial compression are derived based on the composite beam theory. In order to check the validity of the derived buckling equations, the results of experiments on the flexural-torsional buckling of vinylester/E-glass and polyester/E-glass pultruded T-section members and the flexural buckling of vinylester/E-glass pultruded H-section members are used as numerical examples. The comparison of the analytical results to the experimental and FE analysis results reveals that the proposed buckling equations predict the buckling loads of pultruded members conservatively by about 7%.
CMOS 0.18 μm 공정을 이용한 MB-OFDM UWB용 VGA 설계
이승식,박봉혁,김재영,최상성,Lee Seung-Sik,Park Bong-Hyuk,Kim Jae-Young,Choi Sang-Sung 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.2
본 논문은 $CMOS\;0.18\;{\mu}m$ 고정을 이용한 MB-OFDM UWB용 VGA를 설계하였다. 제 안된 VGA는 $-6\~45dB$의 가변이득 조정이 가능하고 3 dB Bandwidth는 필요 성능인 264 MHz를 만족하였다. 2단 연속 구조인 증폭부와 DC 성분을 제거하는 DC offset canceller로 구성되어 있고 1.8 V 바이어스에 4 mA 소비 전류를 만족하였다. In this paper, we have proposed VGA fur MB-OFDM UWB application using $CMOS\;0.18\;{\mu}m$ technique. The proposed VGA can vary power gain from 45 dB to -6 dB and 3 dB band width is more than 264 MHz. It has 3-stage cascade structure and DC offset cancellation. It consumes less, than 4 mA for 1.8 V bias voltage.
이승식(Seung Sik Lee),채수하(Soo Ha Chae),윤순종(Soon Jong Yoon) 한국강구조학회 1997 韓國鋼構造學會誌 Vol.9 No.3
In this paper the finite element analysis results of the local buckling strength of thin walled open section columns composed of orthotropic plate components are presented. The GTSTRUDL SBHQ6 finite element which can account for the membrane force and plate bending behavior is adopted in the FEM analysis. FEM results were compared with the closed-form results obtained by the classical orthotropic plate theory. In the analysis interaction of plate components is taken into account. The difference between the results is in the range of 2.4∼10.8%
이승식(Seung-sik Lee),박미룡(Mi-Ryong Park),강호용(Hoyong Kang) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.11
LTE와 5G등의 통신 커버리지 한계가 있는 산악지 도로공사는 이동하는 토공/포장장비와 모든 디바이스 및 관제 플랫폼이 서로 통신할 수 있도록 하는 장거리 무선통신과 열악한 통신환경을 개선하기 위한 무선통신 네트워크 기술이 필요하다. 본 논문에서는 다양한 환경의 건설현장에 적용 가능한 스마트 무선 네트워크 구성의 구성 요소 및 네트워크 설계에 대한 것이다.
LIPCA 작동기로 구동되는 날갯짓 기구의 설계 및 성능평가
이승식(Seungsik Lee),모 시아푸딘(Moh. Syaifuddin),박훈철(Hoon Cheol Park),윤광준(Kwang Joon Yoon),구남서(Nam Seo Goo) 한국항공우주학회 2005 韓國航空宇宙學會誌 Vol.33 No.12
본 논문에서 LIPCA(Lightweight Piezoceramic Composite Actuator)를 이용한 날갯짓(flapping) 기구의 개발에 관한 최근의 연구진척 사항을 제시하였다. 날갯짓 기구는 여러개의 연결막대를 이용하여 LIPCA의 제한된 작동변위를 커다란 날갯짓 각(flapping angle)이 발생하도록 증폭시켰으며, 패더링 메커니즘(feathering mechanism)을 적용하여 날갯짓과 동시에 날개에 비틀림이 발생하도록 설계되었다. 이 날갯짓 기구의 고유 날갯짓 주파수는 약 9㎐로, 이때 최대의 날갯짓 각이 발생하였다. 제작된 날갯짓 기구의 작동성능을 평가하기 위하여 날갯짓 주파수를 4㎐에서 15㎐까지 변화시키면서 발생되는 양력과 추력을 측정하였으며, 최대 양력과 최대 추력은 고유 날갯짓 주파수 부근에서 계측되었다. In this paper, we present our recent progress in the LIPCA (Lightweight Piezo-Composite Actuator) application for actuation of a flapping wing device. The flapping device uses linkage system that can amplify the actuation displacement of LIPCA. The feathering mechanism is also designed and implemented such that the wing can rotate during flapping. The natural flapping-frequency of the device was about 9 ㎐, where the maximum flapping angle was achieved. The flapping test under 4 ㎐ to 15 ㎐ flapping frequency was performed to investigate the flapping performance by measuring the produced lift and thrust. Maximum Lift and thrust were produced when the flapping device was actuated at about the natural flapping-frequency.
조세범처벌법 제10조의 세금계산서 관련범죄의 구성요건에 관한 고찰
이승식(Lee, Seung-Sik) 대검찰청 2014 형사법의 신동향 Vol.0 No.42
범죄의 구성요건이 명확하지 않아 자의적으로 해석될 우려가 있다면 범죄를 규정한 법의 보장적 기능을 침해할 가능성이 있으므로 범죄의 구성요건은 가능한 한 명확하게 규정하여야 한다. 이 논문에서는 조세범처벌법 제10조에서 규정하고 있는 범죄 중 세금계산서 또는 계산서 관련 범죄의 구성요건을 살펴보았는데, 그 구성요건의 해석상 명확하지 않은 점이 있음을 알 수 있었다. 먼저 부가가치세법에 의한 세금계산서 발급시기는 납세의무의 귀속을 가리기 위한 판단기준일 뿐 조세범처벌법상의 범죄의 성립여부를 가리기 위한 판단기준이 될 수 없으므로 이 규정을 그대로 조세범처벌법상의 세금계산서 발급시기로 볼 수는 없다. 따라서 조세범처벌법에 세금계산서의 발급시기에 관하여 명확히 규정하여야 할 것이다. 다음으로 부가가치세법상 사실과 다른 세금계산서와 조세범처벌법상의 거짓으로 기재한 세금계산서는 문언상 같은 의미로 보아야 하지만, 구체적으로 살펴보면 이 두 가지는 같은 의미를 갖는다고 할 수는 없다. 특히 실제 공급자와 세금계산서상의 공급자 또는 실제 공급받는 자와 세금계산서상의 공급받는 자가서로 다는 경우에는 조세범처벌법 제10조 제1항과 제2항의 거짓으로 기재한 세금계산서에 해당하지 않고, 작성연월일을 사실과 다르게 기재한 경우에는 거짓으로 기재한 세금계산서에 해당하는지 명확하지 않은 경우가 있다. 이와 같은 문제점을 해결하기 위하여는 조세범처벌법에서 거짓으로 기재한다는 의미와 범위를 명확히 규정하여야 할 것이다. If Elements of crimes is not obvious and is interpreted arbitrarily, it may infringe upon the function of protection of human rights which the Punishment of Tax Evaders Act requires. This study has considered the elements of crime related to tax invoice which was defined by article 10 of the Punishment of Tax Evaders Act and has found some questions in interpreting it. Firstly, issuing time defined by Value Added Tax Act is only standard for determining the formation time of tax liability and it is not standard for determining the formation time of crimes. Therefore it can not be applied to crime related to tax invoice and it must be defined by the Punishment of Tax Evaders Act. Secondly, the problem is whether tax invoice entered differently from the fact defined by the Punishment of Tax Evaders Act is equal to false entry tax invoice defined by the Punishment of Tax Evaders Act. By the way this study has found both has not the same meaning. Especially, this study has found that the tax invoice amounts to false entry tax invoice defined by the Punishment of Tax Evaders Act, in which the registration number and name or denomination of the entrepreneur who supplies is entered differently from the fact or in which registration number of the person who receives is entered differently from the fact. And this study has found that the tax invoice do not always amounts to false entry tax invoice defined by the Punishment of Tax Evaders Act, in which the date of preparation is entered differently from the fact. Therefore to solve these problems the meaning and scope of false entry must be defined by the Punishment of Tax Evaders Act.