전동식 조향 장치의 성능 평가를 위한 신경 근육계 기반 운전자 모델 개발

이성현,이동필,이재풍,채흥석,이명수,이경수,Lee, Sunghyun,Lee, Dongpil,Lee, Jaepoong,Chae, Heungseok,Lee, Myungsu,Yi, Kyongsu 한국자동차안전학회 2017 자동차안전학회지 Vol.9 No.3

This paper presents a lateral driver model with neuromuscular system to evaluate the performance of electric power steering (EPS). Output of most previously developed driver models is steering angle. However, in order to evaluate EPS system, driver model which results in steering torque output is needed. The proposed lateral driver model mainly consists of 2 parts: desired steering angle calculation and conversion of steering angle into steering torque. Desired steering angle calculation part results in steering angle to track desired yaw rate for path tracking. Conversion of steering angle into torque is consideration with neuromuscular system. The proposed driver model is investigated via actual driving data. Compared to other algorithms, the proposed algorithm shows similar pattern of steering angle with human driver. The proposed driver can be utilized to efficiently evaluate EPS system in simulation level.

그리드에서 SPKI 인증서를 이용한 권한 위임에 관한 연구

이성현,이재승,문기영,이재광,Lee, Seoung-Hyeon,Lee, Jae-Seung,Moon, Ki-Young,Lee, Jae-Kwang 한국정보통신학회 2007 한국정보통신학회논문지 Vol.11 No.2

그리드에서 인증과 위임 서비스를 제공하기 위해서 일반적으로 이용하고 있는 것이 X.509 인증서이다. 인증 서비스는 X.509 사용자 인증서를 이용하여 제공하고, 위임 서비스는 X.509 프록시 인증서를 이용하여 제공한다. 하지만, X.509 프록시 인증서를 이용한 위임 서비스는 제한 위임과 다중 위임과 같은 그리드 보안 요구사항을 충분히 수용할 수 없으며, 검증을 위한 인증서 신뢰 체인의 형성과 같은 오버헤드를 가질 수 있다. 본 논문에서는 기존 X.509 프록시 인증서를 이용한 위임 서비스가 지원하지 못했던 제한 위임 및 다중 위임을 지원하기 위하여 SPKI 인증서를 이용한 경량화 된 위임 방법을 제안하고, 이에 대한 그리드 적용의 이점을 제시하였다. It is X.509 certificate that use to offer authentication and delegation service in grid. Authentication service offers by X.509 user certificate, and delegation service offers by X.509 proxy certificate. However, in case of provide delegation service using X.509 poxy certificate, can not fulfill complicated delegation requirement of grid. In this paper, proposed delegation mechanism that is done restricted delegation, multiple delegation and light weight that delegation service that use existent X.509 proxy certificate does not have. In this paper, delegation service that proposed used SPKI certificate.

Malassezia pachydermatis에 의한 세포 내 Tyrosinase 저해제의 생산

이성현,유형은,곽윤진,김효진,이대형,이종수,Lee, Sung-Hyun,Yu, Hyung-Eun,Kwak, Yoon-Jin,Kim, Hyo-Jin,Lee, Dae-Hyoung,Lee, Jong-Soo 배재대학교 자연과학연구소 2004 自然科學論文集 Vol.14 No.2

A yeast strain SL-27 found to produce active intracellular tyrosinase inhibitor was screened from 972 kinds of yeasts. It was identified as Malassezia pachydermatis based on microbiological characteristics. The optimum pH and temperature for the growth of Malassezia pachydermatis SL-27 were pH 7.0 and $37^{\circ}C$, respectively. The optimal culture conditions for the production of tyrosinase inhibitor by Malassezia pachydermatis SL-27 were investigated. The optimal medium cimposition for tyrosinase inhibitor production was determined to be 1.0% casamino acid, 2.0% glucose, 0.1% $KH_2PO_4$, 0.05% $MgSo_{4-}7H20$ and each 0.01 of $CaCl_2$ and NaCl. Optimal initial pH and temperature for the production of tyrosinase inhibitor were pH 5.0 and $30^{\circ}C$, respectively. The maximum tyrosinase inhibitory activity of 84%/mL of cell-free extract was showed after 12 h of cultivation under the optimal culturing conditions.

양돈 슬러리의 암모니아 발생 특성에 관한 연구

이성현,윤남규,김경원,이인복,김태일,장진택,Lee S.H.,Yun N.K.,Lee K.W.,Lee I.B.,Kim T.I.,Chang J.T. 한국축산환경학회 2006 축산시설환경학회지 Vol.12 No.1

본 연구에서는 육성 비육돈 슬러리를 이용하여 슬러리의 환경조건에 따라 슬러리로 부터의 암모니아 발생 특성을 분석코자 하였다. 슬러리의 온도와 pH를 조절하여 슬러리로부터 발생하는 암모니아 농도를 측정 분석한 결과 슬러리의 온도가 높을수록 슬러리로 부터 발생하는 암모니아 농도는 급격히 증가하는 것으로 나타났고, 슬러리의 pH를 5, 6, 7, 8의 4수준으로 조절하여 각각의 온도에 따라 발생하는 암모니아 농도를 측정한 결과 pH 5, 6에서는 암모니아 가스가 검출되지 않았으나 pH 7, 8에서는 많은 양의 암모니아 가스가 검출되었고 양돈 슬러리의 pH가 높을수록 발생하는 암모니아 가스가 많이 발생하는 것으로 분석되었다. 본 연구결과 슬러리의 온도를 낮추어 주거나 슬러리의 pH를 낮춤으로써 슬러리로부터 발생하는 악취가스를 크게 줄일 수 있을 것으로 판단되었다. Ammonia emission from swine production process originates from three major sources: manure storage facility, swine housing, and land application of manure. Most of the ammonia gas that are emitted from swine production operations is the by-product of aerobic or anaerobic decomposition of swine waste by microorganism. Knowing the ammonia emission rate is necessary to understand how management practices or alternative manure handling process could reduce impacts of this emission on the environment and neighbors. Ammonia gas emission from pig slurry is very difficult to predict because it is affected by many factors including wind speed of slurry surface, temperature or pH of the swine slurry, sort breed differences and classes, and diets. This study was carried out to effects of pH and temperature on ammonia gas emission from growing-finishing pig slurry. Treated far slurry in this study were pH and temperature. Results showed that pH of slurry variable changes 5, 6, 7, 8 upon an addition of NaOH and $HNO_3$, respectively. The temperature of the slurry which was contained in a water bath maintained at increasing levels ranging from 10 to $35^{\circ}C$. Ammonia emission rate of influenced pH and temperature such that the increase in pH or temperature resulted to an increase in ammonia emission. The ammonia gas was not detected at pH 5 and 6. Moreover, at a slurry of pH 8, the ammonia ranged from 28 to 60ppm and 8-29 ppm at slurry pH of 7 while temperature was 13 to $33^{\circ}C$. When slurry pH was>6, the ammonia emission was significantly increased according to rise in temperature in contrast to acid treatment of the pH. There was also a significantly increase in ammonia emission relative to slurry pH of 7 to 8. The above findings showed that to effectively reduce ammonia emission from slurry of growing-finishing pigs, the pH and temperature should be maintained a low levels.

λ/4 흡수층 구조를 갖는 NDIR 이산화탄소 가스센서용 적외선 센서의 제조 및 특성

이성현,남태운,Lee, Sung-Hyun,Nam, Tae-Woon 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.11

A noble infrared $\lambda/4$ absorbing structure using metal reflector was studied for uncooled infrared sensors. This paper described the design and the fabrication of IR uncooled detectors which were composed of 21 by 21 elements using the surface micromachining technology. The characteristics of the array were investigated in the spectral region of 4.26 ${\mu}m$. The fabricated detectors exhibited the thermal mass of $9.75\times10^{-9}$ J/K, the thermal conductance of $1.31\times10^{-6}$ W/K, the thermal time constant of 7.4 ms, the responsivity of $1.07\times10^5$ V/W and the detectivity of $1.04\times10^9$ $cmHz^{1/2}/W$, at the chopper frequency of 10 Hz and the bias current of 9.22${\mu}A$. Finally the absorptance efficiency of $\lambda/4$ absorbing structure was about 23.2 % higher than that of absence absorbing structure.

식이섬유의 정량 및 기능성 분석

이성현,박홍주,조수묵,Lee Sung-Hyeon,Park Hong-Ju,Cho Soo-Muck 한국작물학회 2004 Korean journal of crop science Vol.49 No.suppl1

전자장비 구조기인소음 저감방안의 실험적 검토

이성현,서윤호,김원형,최영철,Lee, Seong-Hyun,Seo, Yun-Ho,Kim, Won-Hyoung,Choi, Young-Cheol 한국음향학회 2014 韓國音響學會誌 Vol.33 No.2

본 논문은 전자장비의 구조기인소음 (structure-borne noise)의 실험적 저감방안 검토에 대한 내용을 다루었다. 수냉식 전자장비의 유일한 소음원인 냉각장치를 목업(mock-up)으로 제작하여 소음 특성을 파악하였으며, 전원에 의한 영향, 구조체 강성에 의한 영향, 팬 고정부위의 절연에 의한 효과, 마운트의 공진주파수가 미치는 영향 등에 대한 검토를 수행하였다. 이를 반영하여 제작된 전자장비 프로토타입의 소음 특성을 파악하였으며, 구조기인소음을 저감시키기 위하여 작동회전수(rpm) 조합, 마운트 종류 및 설치방법 등에 대하여 검토하였다. 냉각팬 작동 주파수의 1차, 4차 성분에 의하여 소음이 크게 발생하며, 구조체 강성증가, 팬 고정부위 절연, 마운트 공진주파수 저하, 작동회전수조합, 마운트 선정방법 등에 의하여 전자장비의 구조소음을 저감시킬 수 있음을 확인하였다. In this paper, the structure-borne noise reduction on electrical equipment is discussed by the experimental analysis. The water cooling system in electrical equipment is the only noise source, so the mock-up was made to measure noise characteristics. Effects of power supply, stiffness, isolation of noise source and natural frequency determined by resilient mounts are investigated using the mock-up. The console prototype was made referring to noise reduction technique by the mock-up. The structure-borne noise level of a console prototype was measured and some experiments to reduce the noise was undertaken. The $1^{st}$ and $4^{th}$ harmonics of operating frequency of cooling fans causes highest structure-borne noise levels. The control of operating speeds of several DC cooling fan groups was tried. Also types and installation layouts of resilient mounts were investigated. To reduce structure-borne noise, followings can be applied: increase of stiffness, isolation of source, decrease of natural frequency of mount, combination of operating speed of fans, selection of mounts, and so on.

농업기술 - 농작업자 보호를 위한 비닐하우스용 이동식 차광장치 설치와 효과

이성현,국순자,Lee, Seong-Hyeon,Guk, Sun-Ja 전국농업기술자협회 2011 농업기술회보 Vol.48 No.5

리튬이차전지용 Si-M (M : Cr, Ni) 합금 음극의 미세구조와 전기화학적 특성

이성현,성재욱,김성수,Lee, Sung-Hyun,Sung, Jewook,Kim, Sung-Soo 한국전기화학회 2015 한국전기화학회지 Vol.18 No.2

본 실험에서는 리튬이차전지의 고용량 음극활물질로 주목받는 Si 합금의 부피팽창을 억제하기 위한 방법의 하나인 비활성-matrix상을 이용하고, 상태도를 이용하여 동일한 용량을 발현하는 Si계 이원계 합금 (Cr-Si, Ni-Si) 조성에서의 미세구조 및 전기화학적 특성을 비교/분석하였다. 급속응고공정(Rapid Solidification Process, Melt-spinning법)를 이용하여 동일조건하에서 리본 모양의 합금을 제작하였고, 제작된 리본합금은 동일조건에서 분쇄하여 X-선회절 (X-Ray Diffraction) 분석을 실시하였다. XRD 분석 결과, 상태도에서 예측된 것과 같이, 두 합금 모두 Si 상 및 비활성-matrix상($CrSi_2$ 및 $NiSi_2$)이 관찰되었으며, 이외의 제3의 상은 관찰되지 않았다. 또한, 주사전자현미경(SEM, Scanning Electron Microscope) 및 투과전자현미경-에너지분산분광법(TEM-EDS, Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy)으로 미세구조를 살펴본 결과 Cr-Si 합금의 미세구조가 Ni-Si 합금보다 fine한 것을 알 수 있었고 이것은 상태도로부터 예측 가능하였다. 두 합금 조성에서 미세구조에 따른 전기화학적 특성을 비교 평가하기 위해 코인형 하프셀과 풀셀로 충방전 실험을 진행하였고 이와 별도로, 전극의 두께변화 측정이 가능하게 설계된 시험셀을 이용하여 반응 중 Si의 수축팽창을 측정하였다. coarse한 미세구조를 가진 Ni-Si 합금보다 fine한 미세구조를 갖는 Cr-Si 합금의 전극팽창이 비교적 잘 억제됨을 확인하였고, 충방전에 따른 수명 내구성도 우수함을 확인하였다. 이런 결과들로부터 합금의 조성에 따른 미세구조, 체적변화 및 전기화학적 열화와의 연관성을 유추할 수 있었다. To compare the microstructure and electrochemical properties between two binary alloys (Cr-Si, Ni-Si), two composition of binary alloys with the same capacity were selected using phase-diagram and prepared by matrix-stabilization method to suppress the volume expansion of Si by inactive-matrix. Master alloys were made by Arc-melting followed by fine structured ribbon sample preparation by Rapid Solidification Process (RSP, Melt-spinning method) under the same conditions. Also powder samples were produced by wet grinding for X-Ray Diffraction (XRD) and electrochemical measurements. As predicted from the phase diagram, only active-Si and inactive-matrix ($CrSi_2$, $NiSi_2$) were detected. The results of Scanning Electron Microscope (SEM) and Transmission Electron Microscopy - Energy Dispersive X-ray Spectroscopy (TEM-EDS) show that Cr-Si alloy has finer microstructure than Ni-Si alloy, which was also predictable through phase diagram. The electrochemical properties related to microstructure were evaluated by coin type full- and half-cells. Separately, self-designed test-cells were used to measure the volume expansion of Si during reaction. Volume expansion of Cr-Si alloy electrode with finer microstructure was suppressed significantly and improved in cycle capability, in comparison Ni-Si alloy with coarse microstructure. From these, we could infer the correlation of microstructure, volume expansion and electrochemical degradation and these properties might be predicted by phase diagram.

자화수에서 계면활성제 임계미셀농도 변화에 관한 연구

이성현,이석근,전상일,Lee, Sung-Hyun,Lee, Suk-Keun,Jeon, Sang-Il 대한화학회 2009 대한화학회지 Vol.53 No.2

자화수는 물분자의 수소결합에 의한 배열이 특이한 구조를 갖게 됨에 따라 다양한 물리 화학적 성질을 나타낸다. 본 연구에서는 자화수가 계면활성제의 임계미셀농도 (critical micelle concentrations, CMC) 변화에 미치는 영향을 다음과 같이 관찰하였다. $25\;{^{\circ}C}$에서 전도도계(conductivity meter)를 이용하여 음이온 계면활성제인 SDS (sodium dodecyl sulfate)와 양이온 계면활성제인 CTAB (cetyltrimethylammonium bromide)의 CMC를 측정하였고, 표면장력계를 사용하여 SDS와 CTAB 그리고, 비이온 계면활성제인 Pluronic F-68의 CMC를 측정하였다. 또한 Isothermal titration calorimeter (ITC)를 이용하여 $25\;{^{\circ}C}$에서 SDS의 열량변화를 측정하여 CMC의 변화율을 측 정하였다. 결과적으로, 자화수에서 계면활성제의 CMC는 증류수에 비해 현저하게 낮아지는 경 향을 보였는데, SDS는 자화수에서 약 $2.7{\sim}6.5$% 정도 낮아짐을 보였고, CTAB는 자화수에서 약 $2.3{\sim}3.0$% 정도 낮아짐을 보였으며, Pluronic F-68은 자화수에서 약 24.2% 정도 낮아짐을 보였다. The magnetized water is known to have a unique pattern of hydrogen bond between water molecules, thereby producing different physicochemical properties from the ordinary water. We have examined the effect of magnetized water on the change of critical micelle concentrations (CMC) of some surfactants. The CMC changes of SDS (sodium dodecyl sulfate) and CTAB (cetyltrimethylammonium bromide) dissolved in the magnetized water have been determined by the conductivity measurement at $25\;{^{\circ}C}$ and that of SDS, CTAB and Pluronic F-68 have also been examined by the surface tension method at $25\;{^{\circ}C}$. The CMC variation of SDS was examined by ITC (Isothermal Titration Calorimeter) at $25\;{^{\circ}C}$. The CMC of SDS, CTAB, and Pluronic F-68 are more decreased in the magnetized water, SDS is about $2.7{\sim}6.5$25 %, CTAB is about $2.3{\sim}3.0$%, and Pluronic F-68 is about 24.2 %, than in the control water.