http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산업용 내장형 소프트웨어를 위한 품질 시험 모듈의 개발
이선원(Lee, Sun-Won),이하용(Lee, Ha-Yong),양해술(Yang, Hae-Sool) 한국산학기술학회 2007 한국산학기술학회논문지 Vol.8 No.2
산업용 소프트웨어의 유형은 크게 패키지형, 내장형, 시스템형으로 구분할 수 있다. 패키지형 소프트웨어는 산업용 ERP를 의미하며, 내장형 소프트웨어는 산업용 기기에 내장되어 사용되고, 시스템형은 제조 및 생산 시스템의 전반적인 제어를 위한 소프트웨어이다. 본 논문에서는 산업용 내장형 소프트웨어를 대상으로 하여 품질시험 및 평가를 수행할 수 있는 평가모듈의 개발에 관해 기술하였다 평가모듈의 객관성 및 타당성을 제고하기 위해서는 국제표준 을 기반으로 한 체계 구축이 필수적이다 관련된 국제표준으로는 소프트웨어 제품의 요구사항 및 평가에 관한 표준인 ISO/IEC 12119와 9126이 있으며, 평가모듈의 구성 형식을 규정하고 있는 ISO/IEC 14598-6이 있다. 이러한 표준들을 기반으로 하여 산업용 내장형 소프트웨어의 품질 요구사항을 추출하고 품질 요구의 만족 수준을 평가할 수 있는 평가모듈을 구축하였다. The types of industrial software are classified into package, embedded and system type. The Package type software means industrial ERP, the embedded software is built in industrial devices and the system type software controls the manufacturing and production system. In this paper, we described about the development of evaluation modules which can implement quality test and evaluation for industrial embedded software. If you are planning to enhance the objectivity and th?validity of evaluation modules, it is necessary to construct the system based on international standard. There are two international standard, ISOIIEC 12119 and ISO/IEC 9126 related to quality evaluation of software. Also ISO/IEC 14598-6 is the standard that defines the construction form of the evaluation modules. Based on these standards, We extracted the quality requirements of industrial embedded software and constructed the evaluation modules that can evaluate the content level of the quality requirements.
소화기 ; 유전자형 1형 만성 C형 간염 환자에서 혈청 인터페론감마유도단백질-10의 의미
이영선 ( Young Sun Lee ),김태형 ( Tae Hyung Kim ),이범재 ( Beom Jae Lee ),김지훈 ( Ji Hoon Kim ),김선원 ( Sun Won Kim ),이현정 ( Hyun Jung Lee ),김재선 ( Jae Seon Kim ),연종은 ( Jong Eun Yeon ),변관수 ( Kwan Soo byun ),박종재 ( Jo 대한내과학회 2010 대한내과학회지 Vol.79 No.6
목적: 최근 1형 만성 C형 간염 환자에서 CXC 케모카인중 하나인 IP-10의 치료 전 혈중 농도가 지속적 바이러스 반응을 예측할 수 있는 주요한 인자일 수 있다는 보고들이 있었다. 이에 본 연구에서는 국내의 1형 만성 C형 간염 환자에서 페그인터페론과 리바비린 병용 투여 시 T 림프구 특이성 케모카인인 IP-10의 혈중 농도 변화와 이들과 여러 바이러스 반응들 간의 연관성을 알아보고자 하였다. 방법: 유전자형 1형 만성 C형 간염으로 진단받고 초 치료로써 페그인터페론과 리바비린 병용 치료를 받은 환자 36명을 대상으로 진행하였다. 보관되어 있는 환자 혈청을 이용하여 치료 시작 1개월 전과 1개월 후의 IP-10 수치를 각각 측정하였으며, 치료 전 IP-10 수치와 여러 바이러스 반응과의 관계 및 치료 전과 치료 후의 IP-10 수치 변화와 여러 바이러스 반응과의 관계에 대하여 연구하였다. 결과: 환자의 나이는 평균 53.5±10세이고, 21명(58%)이 남자였으며, 치료 전 HCV RNA의 평균은 5.7±0.9 log10 IU/mL이었고, IP-10 정량 결과는 평균 432.2±343.7 pg/mL이었다. 치료 전 환자의 IP-10 정량 값과 HCV RNA 정량 값은 양의 상관관계를 나타내었으나, 통계적으로는 유의하지 않았다. 치료 전 환자의 IP-10의 평균값은 432.2±343.7 pg/mL이었고, 치료 1개월 후의 IP-10의 평균값은 306.5±246.1 pg/mL로 그 감소 정도는 유의하였다(p=0.033). 여러 바이러스 반응과 치료 전 IP-10치의 관계에 대한 분석에서 바이러스 반응 유무에 따른 치료 전 IP-10 값에는 유의한 차이를 발견할 수 없었다. 각각의 바이러스 반응을 보인 군과 그렇지 않은 군에서치료 전과 치료 후의 IP-10의 변화를 확인해 본 결과 바이러스 반응의 유무에 관계없이 전반적으로 치료 후 IP-10 값은 감소하는 모습이었으나 대체로 통계적으로 유의한 수준은 아니었다. 결론: 치료 전 IP-10 수치와 치료 한 달 전과 한 달 후의 IP-10 수치의 변화는 지속적 바이러스 반응의 예측인자는 아니었다. 하지만 더 큰 규모의 연구를 통하여 IP-10 수치와 바이러스 반응과의 관계를 규명하는 것이 필요하겠다. Background/Aims: Recent studies have shown that serum interferon γ-inducible protein-10 (IP-10) concentration decreased after pegylated interferon and ribavirin therapy, and was associated with a sustained virologic response (SVR). The aim of this study was to investigate the clinical significance of the pretreatment IP-10 level and change in serum IP-10 level between 1 month before and after treatment and its association with various virologic responses in patients having chronic hepatitis C (CHC) with genotype 1 undergoing pegylated interferon and ribavirin therapy. Methods: Thirty-six patients having CHC with genotype I undergoing pegylated interferon and ribavirin therapy who had available stored sera 1 month before and after treatment were enrolled retrospectively. Serum IP-10 levels were measured by ELISA. Serum HCV RNA was measured by RT-PCR (detection limit<50 IU/mL). Results: The mean age of patients (n=36; 21 men) was 53.5 years, and the mean of pretreatment HCV RNA levels was 5.7 log10 IU/mL. The serum IP-10 level at 1 month after treatment significantly decreased from 432.2 to 306.5 pg/mL (p=0.033). The rate of rapid virologic response (RVR), early virologic response (EVR), end-of-treatment response (ETR), and SVR were 58%, 83%, 74%, and 57%, respectively. No significant difference in pretreatment IP-10 levels was observed between the patients with (RVR, EVR, ETR, and SVR) and without various virologic responses (p>0.05). The change in serum IP-10 between 1 month before and after treatment had no clinical meaning based on various virologic responses (p>0.05). Conclusions: The level of pretreatment IP-10 and change in IP-10 level between 1 month before and after treatment were not predictive factors of a SVR. Additional large-scale studies to determine the SVR-predicting role of serum IP-10 levels in patients with CHC are needed. (Korean J Med 79:652-660, 2010)
김선원,송병기,이성재,Kim, Sun-Won,Song, Byung-Ki,Lee, Song-Jae 한국광학회 2002 한국광학회지 Vol.13 No.4
LED 램프의 기본 설계이론을 제시하였다. 설계된 LED 램프에 사용된 reflecting cup과 렌즈는 몇몇의 설계 변수에 의하여 다양한 형태로의 모양의 변화가 가능하다는 특징을 갖는다. Monte Carlo 기법을 이용하여 설계된 램프를 해석한 결과 다양한 응용분야에서 요구되는 빔 패턴특성을 손쉽게 구현할 수 있음을 확인할 수 있었다. The fundamentals of light-emitting diode lamp design are presented. The shapes of the reflecting cup and lens employed in LED lamps can be flexibly adjusted, over a relatively large range, by using a few parameters. The analysis of the designed lamps by Monte Carlo photon simulation shows that diverse far-field beam patterns required in various application areas can be achieved.
블루투스 기저대역을 위한 상관기와 액세스 코드 생성 모듈의 설계
황선원,이상훈,신위재,Hwang Sun-Won,Lee Sang-Hoon,Shin Wee-Jae 한국융합신호처리학회 2005 융합신호처리학회 논문지 (JISPS) Vol.6 No.4
본 논문에서는 블루투스 기저대역에 적용하기 위한 상관기와 액세스 코드 생성모듈의 설계에 대해 다룬다. 상관기와 액세스 코드 생성 모듈은 블루투스 유닛 사이의 연결설정과 패킷판별, 클록 동기화를 수행한다. 상관기 모듈은 1Mb/s 전송속도를 가지는 입력신호에 대해 슬라이딩 윈도우 상관을 취하여 유용한 패킷판별과 클록 동기화를 행하며, 그 구성은 Wallace tree 구조의 CSA(Carry Save Adder)와 임계 값 판별기로 구성된다. 액세스 코드 생성모듈은 블루투스 표준안에서 제시한 4단계의 생성과정에 따라 설계하였으며 BCH(Bose-Chadhuri-Hocquenghem)순회 부호기(cyclic code)와 제어장치로 구성된다. 의사 랜덤 시퀀스는 동기화 문제를 해결하기 위해 임의의 저장장치에 저장된 형태로 사용하였다. 본 논문에서 제시한 상관기와 액세스 코드 생성모듈은 하드웨어 묘사언어인 VHDL로 설계되었으며 시뮬레이션 및 테스트를 위해 Xilinx FPGA를 사용하여 검증하였다. 설계된 회로의 합성결과는 치대 4.689ns의 임계지연과 최대 7-bit까지의 상관허용 오차를 보여준다. We describe the design for a correlator and an access code generator in bluetooth system. These are used for a connection setting, a packet decision and a clock synchronization between Bluetooth units. The correlator consists of two blocks; carry save adder based on Wallace tree and threshold-value decision block. It determines on an useful packet and clock-synchronization for input signal of 1.0Mbps through the sliding-window correlating. The access-code generator also consists of two blocks; BCH(Bose-Chadhuri-Hocquenghem) cyclic encoder and control block. It generates the access-codes according to four steps' generation process based on Bluetooth standard. In order to solve synchronization problem, we make use of any memory as a pseudo random sequence. The proposed correlator and access-code generator were coded with VHDL. An FPGA Implementation of these modules and the simulation results are proved by Xilinx chip. The critical delay and correlative margin based on synthesis show the 4.689ns and the allowable correlation-error up to 7-bit.
REBCO 초전도 박막제조를 위한 Fluorine-free MOD 전구체 용액 개발
김병주,임선원,김호진,홍계원,이희균,Kim, Byeong-Joo,Lim, Sun-Weon,Kim, Ho-Jin,Hong, Gye-Won,Lee, Hee-Gyoun 한국초전도학회 2006 Progress in superconductivity Vol.7 No.2
New precursor solution with dichloroacetic acid (DCA) was developed for fabricating high $J_c$ REBCO film. DCA based-precursor solution was coated on $LaAlO_3$(001) substrate by dip coating method. Processing parameters such as oxygen partial pressure, water vapor, ramping rate and pyrolysis temperature were controlled in order to obtain a good epitaxial film. The film with thickness of 0.5 micrometer was obtained by single coating and no crack was observed at calcined films. Oxygen partial pressure was controlled in the range of $100{\sim}1,000$ ppm and conversion heat treatment was carried out at the temperature range of $705-765^{\circ}C$. A critical transition temperature ($T_c$) of 90 K and a critical transport current density ($J_c$) of $>0.5\;MA/cm^2$ (77 K and self-field) were obtained for the GdBCO film. It is thought that fluorine-free MOD solution using DCA is promising precursor solution for fabricating high quality REBCO films.