http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신호근(Hokeun Shin),이석곤(Seokgon Lee),박동민(Dongmin Park),신진우(Jinwoo Shin),정명수(Myungsoo Chung),박상현(Sanghyun Park),박용배(Yong Bae Park) 한국전자파학회 2017 한국전자파학회논문지 Vol.28 No.7
본 논문에서는 함정용 통합 마스트의 레이다 단면적을 분석한다. 레이다 단면적 분석을 위한 물리 광학법 및 물리광학 회절이론 기반의 계산 프로그램을 개발하고, 상용 시뮬레이터와 비교를 통해 계산의 정확도를 확인한다. 함정용 마스트의 형상과 입사각, 편파에 따른 레이다 단면적 변화를 계산하고 분석한다. 마스트의 측면 기울기 변화 및 모따기가 있는 마스트 구조를 통해 레이다 단면적을 감소시킬 수 있고, 이것을 저 RCS 함정 마스트 개발에 활용할 수 있음을 확인한다. In this paper, the radar cross section of the integrated mast module for battleship is analyzed. The computation program based on physical optics and physical theory of diffraction is developed and the computed results are compared with those of commercial simulator to check the accuracy of computations. The radar cross section is calculated in terms of the mast shape, incident angle, and polarization. The radar cross section can be reduced through the change of the mast slope and the chamfered mast, which can be applied to a mast with a low radar cross section.
PIN 다이오드를 이용한 다중 편파 재구성 마이크로스트립 안테나
송태호(Taeho Song),이영기(Youngki Lee),박대성(Daesung Park),이석곤(Seokgon Lee),김형주(Hyoungjoo Kim),최재훈(Jaehoon Choi) 한국전자파학회 2013 한국전자파학회논문지 Vol.24 No.5
본 논문에서는 S-밴드에서 하나의 급전 회로로 4개의 편파(수직 편파, 수평 편파, 좌선회 편파, 우선회 편파)를 선택적으로 사용할 수 있는 다중 편파 재구성 마이크로스트립 안테나를 제안하였다. 제안된 안테나는 십자 슬롯과 원형 슬롯을 포함하는 정사각형 형태의 마이크로스트립 패치와 4개의 PIN 다이오드로 구성되어 있으며, 커플링을 통한 급전 방식을 이용한다. 각각의 PIN 다이오드에는 직류 전압을 인가하기 위한 바이어스 단이 있으며, 직류 전압의 인가에 따른 다이오드 ON / OFF 동작으로 편파를 재구성할 수 있다. 제작된 안테나는 수직편파(3.17~3.21 ㎓), 수평 편파(3.16~3.20 ㎓), 좌선회 편파(3.08~3.19 ㎓), 우선회 편파(3.10~3.20 ㎓)에서 VSWR 2:1을 만족하며, 선형 편파에서는 20 ㏈ 이상의 교차 편파 및 5 ㏈i 이상의 이득 특성을 갖고, 원형 편파에서는 50 ㎒ 이상의 3 ㏈ 축비 특성을 나타낸다. In this paper, a multi polarization reconfigurable microstrip antenna that can be used selectively for four polarizations(vertical polarization, horizontal polarization, right hand circular polarization, left hand circular polarization) at the S-band is presented. The proposed antenna consists of four PIN diodes and a microstrip patch with a cross slot and a circular slot and is fed by utiliting electromagnetic coupling between the microstrip patch and the feed line. The proposed antenna has a DC bias network to supply DC voltage to each PIN diode and the polarization can be determined by controlling the ON /OFF states of four PIN diodes. The fabricated antenna has a VSWR below 2 in the vertical polarization(3.17~3.21 ㎓), the horizontal polarization(3.16~3.20 ㎓), the left hand circular polarization (3.08~3.19 ㎓), and the right hand circular polarization(3.10~3.2 ㎓) frequency bands. The designed antenna has the cross polarization level higher than 20 ㏈, a gain over 5 ㏈i for the linear polarization states, and 3 ㏈ axial ratio bandwidth wider than 50 ㎒ in the circular polarization states.