RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        부분 구조물의 민감도 분석을 이용한 버스차체의 진동분석

        이상범,Lee, Sang-Beom 한국생산제조학회 2009 한국생산제조학회지 Vol.26 No.3

        In this paper, an analysis technique is presented for performing the effective design of bus structure. Sensitivity analysis is carried out for the natural frequency of component structures consisting of bus B.I.W. Local vibration modes of substructure, which large affect on the global vibration mode of the bus B.I.W., are obtained through the sensitivity analysis technique using the mathematical chain rule. And also the design variables, which are determined from the sensitivity analysis, are redesigned through optimum design process. The proposed analysis technique shows that the bus structure can be effectively designed considering the vibration characteristics.

      • KCI등재

        소규모 프로젝트의 효율적인 공사관리방안

        이상범,이동운,Lee, Sang-Beom,Lee, Dong-Un 한국건축시공학회 2003 한국건축시공학회지 Vol.3 No.4

        A construction project's period is limited by the order manufacture. And a construction project is requested a specific place, and has the characteristic to be irregular. Today, construction is to be representative high-cost and low-efficiency. This kind of problems appears in small construction projects more often than large construction projects. According to this facts, we recognized necessity of making practical application in methods of construction management. Also, we suggest application and establishment of integrated responsibility management department, PMIS(Project Management Information System) and Data Base. From now on, methods of construction management could be good opportunities for small construction projects and local construction companies. Therefore, small and local construction companies should try to improve their abilities. Likewise, the countries systematize to constitute the relation laws.

      • Formal Specification Methods for Distributed Object-Oriented Systems

        이상범,Lee, Sang-Beom Korea Information Processing Society 2000 정보처리논문지 Vol.7 No.5

        As distributed computing systems become popular, many modeling techniques and methods have been developed in specify the specification formally and verify the distributed/concurrent sytems. In spite of importance of communication in distributed object-oriented systems, specifying of communication method generally has not been emphasized in the design phase. One reason is due to the system designer misunderstanding, that is, a specification needs to be independent on the implementation. However, since defining communication pattern indistributed object-oriented systems is more serious than the required message passing method in the design phase. specifying the communication pattern is necessary instead of postponing until the implementation. In this paper, two formal specification techniques, temporal logic method and Petri nets method, for the communication in distributed systems are discussed. One is based on the temporal logic, which specifies the different patterns of primitive predicates. This method enable to define the underlying mechanism which can be interpreted as constraints. The Petri net method helps to specify the dynamic behavior of communicational patterns using the properties of Petri nets.

      • 치환된 $LaMnO_3$의 환원반응성에 대한 연구

        이상범,전현표,Lee, Sang-Beom,Jeon, Hyun-Pyo 배재대학교 자연과학연구소 2004 自然科學論文集 Vol.14 No.2

        $LaMnO_3$(a=$5.51\AA$, c=$13.33\AA$) 페로브스카이트형 복합산화물에서 A site인 La자리에 Sr을 치환시킨 $La_{0.9}Sr_{0.1}MnO_3$(a=$5.33\AA$, c=$13.27\AA$)와 B site인 Mn을 Cu로 치환시킨 $LaMn_{0.9}Cu_{0.1}O_3$(a=$5.52\AA$, c=$13.31\AA$) 복합산화물을 Citrate sol-gel법을 이용하여 합성하였으며 분말 X-ray회절 분석기(XRD)을 이용하여 Rhombohedral의 페로브스카이트 구조임을 확인하였다. 수소 환원분위기에서의 TRR결과에 의하면 이들 산화물의 산소 화학양론은 $LaMnO_{3.16}$, $La_{0.9}Sr_{0.1}MnO_{3.10}$, $LaMn_{0.9}Cu_{0.1}O_{3.14}$의 조성을 갖는다. $LaMnO_3$는 2단계 환원반응을 일으키지만 각 자리를 치환시킨 $LaMnO_3$ 복합산화물은 3단계 환원반응을 일으켰다. $LaMnO_3$ and A site substituted $La_{0.9}Sr_{0.1}MnO_3$(a=$5.33\AA$, c=$13.27\AA$), B site substituted $LaMn_{0.9}Cu_{0.1}O_3$(a=$5.52\AA$, c=$13.31\AA$) mixed oxides were prepared by Citrate sol-gel method. The powder X-ray diffraction patterns of these oxides were indexed with single phase hexagonal perovskite structures. According to the TRR result, oxygen stoichiometry of these oxides were oxidative nonstoichiometry as like $LaMnO_{3.16}$, $La_{0.9}Sr_{0.1}MnO_{3.10}$ and $LaMn_{0.9}Cu_{0.1}O_{3.14}$ Reduction reactions of un-substituted $LaMnO_3$ was two steps, but specific site(A site of B site) partially substituted $LaMnO_3$ oxides were procees to three reactions.

      • 이산화 티타늄 ($TiO_2$) 과 탄산 바륨 ($BaCO_3$) 간의 고체상태 반응

        이상범,손병찬,Lee, Sang-Beom,Son, Byeong-Chan 배재대학교 자연과학연구소 1987 自然科學論文集 Vol.1 No.-

        $BaCO_3$ 와 다양한 입자크기의 $TiO_2$ 의 고체상태 반응을 산소 ( 혹은 공기 ) 와 이산화탄소 중에서 열중량 분석법 (TG) 과 시차 열분석법 (DTA) 를 이용하여 반응속도론 및 반응기구를 조사하였다. 중간생성물과 최종생성물의 확인은 X-ray 회절 분석법 (XRD) 을 이용하였다. $TiO_2$ 의 반응성은 입자의 크기가 $0.15\mum$이하일 때 현저히 증가하였다. 반응초기에 $BaTiO_3$ 는 반응물의 접촉표면에서 생기기 시작하며 반응의 진행과정은 Jander 에 따라 확산조절과정이 된다. 반응과정에서 BaO-$TiO_2$ 의 상평형도에 기술된 화합물들이 중간물질로써 나타난다. 공기중에서는 상당한 양의 $Ba_2$$TiO_4$ 가 생성되지만 $CO_2$ 의 분위기에서는 약 $1100^{\circ}C$까지 억제된다. 이 온도는 열역학적 계산치인 $1060\pm$ $50^{\circ}C$와 잘 일치하고 있다. 확산과정의 활성화 에너지 값은 공기중에서는 56.4Kcal/mol 이었으며 이산화탄소의 경우에서는 79.6Kacl/mol 이었다.

      • KCI등재

        2축 분할식 차량 구동라인의 굽힘진동 저감을 위한 동흡진기 최적설계

        이상범,유영선,Lee, Sang-Beom,Yoo, Young-Sun 한국음향학회 2010 韓國音響學會誌 Vol.29 No.2

        In this paper, design parameters of dynamic vibration absorber, which is used to reduce bending vibrations of a vehicle drive line, is optimized. For obtaining the correct dynamic response characteristics, a flexible-body drive line is made by applying the flexibility data extracted from vibration analysis of propeller shafts to the drive line dynamic model. Inner tube mass, rubber stiffness and rubber damping coefficient of the dynamic vibration absorber are taken as design parameters for optimization. To minimize the vertical acceleration of the drive line, a second-order regression equation of the objective function is generated by performing the central composite experimental design with 3 factors, 2 levels and 15 test runs. And the design parameters of the dynamic vibration absorber are determined by using optimization program. The vehicle model with optimized dynamic vibration absorber reduces the vertical acceleration peak of the drive line by 17.1 % in compared with the initial model. 본 논문에서는 차량 구동라인의 굽힘 진동을 저감시키기 위해 사용되는 동흡진기의 설계 파라미터에 대한 최적설계를 수행하였다. 정확한 동적 응답특성을 얻기 위해 구동라인을 구성하는 추진축의 진동해석으로부터 추출된 유연성 데이터를 구동라인 동역학 모델에 적용하여 유연체 구동라인을 만들었다. 동흡진기의 내부 튜브 질량, 고무 강성계수 및 고무 감쇠계수를 최적화를 위한 설계 파라미터로 선택하였다. 구동라인의 수직 가속도를 최소화시키기 위해 중심합성 실험계획법의 3-요인, 2-수준 실험을 15회 수행하여 목적함수에 대한 2차 회귀방정식을 만들었으며, 최적화 프로그램을 이용하여 동흡진기 설계 파라미터들을 결정하였다. 최적화된 동흡진기를 장착한 차량 모델은 초기 모델에 비해 구동라인의 수직 가속도 피크값을 17.1% 감소시켰다.

      • KCI등재

        건설공사 수행에 따른 최종공사비 예측방법에 관한 연구

        이상범,Lee, Sang-Beom 한국건축시공학회 2002 한국건축시공학회지 Vol.2 No.4

        The EVMS(Earned Value Management System) comes from C/SCSC which was first released by the United States Department of Defense in December 1967, and preyed very powerful and efficient project management tool from a lot of practices. Although it is an excellent tool, we can not be succeed appling foreign system due to the differences of construction culture and law between the Korean and US construction industries. EAC(Estimate at Completion) is one of the most important functions in the EVMS. The purpose of this study is to propose the improved EAC method according to the performance indices better than old that and to prove from examples. In advance, the improved EAC method is to estimate more exactly costs and to promote efficiency in construction projects.

      • KCI등재
      • KCI등재
      • KCI등재

        왕우렁이(Pomacea canaliculata)의 생리·생태학적 특성 및 논 잡초방제용으로 투입된 왕우렁이의 집단패사 원인

        이상범,이상민,고병구,이초롱,김진호,Lee, Sang-Beom,Lee, Sang-Min,Ko, Byong-Gu,Lee, Cho-Rong,Kim, Jin-Ho 한국유기농업학회 2018 韓國有機農業學會誌 Vol.26 No.2

        본 연구는 왕우렁이의 생리 생태적 특성 및 논 잡초방제를 위하여 투입된 왕우렁이들의 집단패사 원인을 구명하기 위하여 수행하였다. 1983년 국내에 도입되어 양식과 논 잡초방제를 위하여 활용되고 있는 왕우렁이의 종(species)은 연체동물문(Mollusca), 복족강(Gastropoda), 중복족목(Mesogastropoda), Ampulariidae과, Pomacea속에 속하는 Pomacea canaliculata Lamarck이다. 왕우렁이의 생리 생태적 특성조사 결과 왕우렁이 성체들이 국내에서 월동되고 있으나 왕우렁이 알로는 월동되지 못하고 있다. 수컷과 암컷의 비율은 1:1.99~2.33배로 암컷의 구성비가 높았다. 생장량은 1일에 87.7 mg이었으며, 껍질은 각고가 0.31 mm, 각경이 0.33 mm씩 자랐다. 왕우렁이의 생장은 먹이의 조건 등에 따라서 차이가 있을 수 있으며, 매우 빠른 생장량을 나타내었다. 한편, 건조에 대한 저항성은 매우 강하여 3개월까지 생존율이 약 80%에 달하였다. 왕우렁이 서식에 따른 수질에 미치는 영향을 평가한 결과 다량의 서식 밀도에서는 약간의 영향을 줄 수는 있겠으나, 잡초방제를 위하여 투입되는 밀도에서는 전혀 영향이 없었다. 논 잡초방제를 위하여 벼 이앙초기에 투입되는 왕우렁이가 2~3일 이내에 일시에 집단 패사되는 직접적인 원인은 미소생물인 패충류(참씨벌레)에 의하여 발생되지 않는 것으로 판명되었다. 다만 패충류 (참씨벌레)에 의하여 패사되는 비율은 밀도에 따라 2.86%와 5.71%로 매우 미미하였고, 통계적인 유의적인 차이가 없었다. 논 잡초방제를 위하여 투입된 왕우렁이들은 벼 이앙시기가 빨라지고, 일교차가 커지면서 추운 저온의 날씨로 인하여 논의 흙속으로 들어가서 죽거나 일부는 새의 먹이가 되어 사라지기 때문에 다량이 죽은 것으로 오해되었다. The golden apple snail (GAS, Pomacea canaliculata) is an invasive freshwater snail. The GAS was introduced in Korea without prior studies on the possibility of crop damage or its impact on the natural ecosystem. The freshwater apple snails can be found typically in ponds, rice paddies, irrigation canals, roadside ditches or slower portions of streams. In this study, we were carried out to investigate the assessment of physiological and ecological characteristics, environmental characteristics inhabited area in winter season and cause of massive death at one time of golden apple snails used for weed control in wet rice paddies. The GAS was introduced from Japan to Korea for commercial production as a dietary protein supplement. The golden apple snail was also used a recently for weed control in wet rice cultivation. The species of freshwater Pomacea snails is belonging to the genus Pomacea, family ampulariidae, order mesogastropoda, subclass pulmonata, class gastropoda, phylum mollusca. The GAS spread into irrigation ditches and natural waterways. It is now distributed in ponds and canals near rice fields of southern parts of the country and has overwintered. It increases its cold hardiness before winter. However, the physiological mechanism of cold hardiness in molluscs is poorly understood, especially in freshwater molluscs. Our results on physio-ecological characteristics of the Pomacea apple snail showed that the ratio of males to females was 1: 1.99~2.33. The daily growth was 87.7 mg in weight, 0.31 mm in height and 0.33 mm in width of the their shell. On the other hand, the golden apple snails were very high to resistance on drying condition and survived rate about 80% up to 3 months. The inhabitation of GAS was no statistical significant impacts on the water quality. An important property of aqueous solutions is agricultural water quality because it affects chemical and biochemical properties such as chemical reactions, equilibrium conditions, and biological toxicity. The death rate of weed control apple snails by Ostracoda (Stenocypris hislopi) was only 2.86% and 5.71% depending on the density. Therefore, GAS was not a direct death caused by Ostracoda (Stenocypris hislopi).

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼