http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LPLi 엔진 인젝터에서의 Icing 가시화 및 이의 유입이 연소와 배기가스에 미치는 영향
박정철(Jungcheil Park),김우석(Wooseok Kim),이종화(Jonghwa Lee),이병옥(Byungohk Rhee),박경석(Koungseok Park) 한국자동차공학회 2003 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
Ever since air pollution issues have risen globally, each automobile manufacturer has been undergoing vigorous development for low emission vehicles. One of these researches is the use of clean fuel to reduce emission. And the development of the LPLi system is one of them. Compared to the conventional mixer system, the LPLi system can fine control the air fuel ratio, and thus resulting in outstanding emission reduction and power. But there are a few problems in the development. One of them is the Icing that occurs at the tip of the injector.<br/> If an Icing particle enters the combustion chamber, it effects the combustion and has the following problems; When the Icing particles enter the cylinder, the visualization has been performed the intake manifold and the injector tip. And the analysis of the exhaust gas shows that HC, CO, and O₂ increases while CO₂ and NOχ decreases after the Icing particle flows in the cylinder. These results are similar to when the combustion is unstable, and a rich value of the air-fuel ratio also proves incomplete combustion.<br/>
LPLi 엔진 인젝터 주위의 Icing 방지를 위한 설계 변수의 실험적 연구
박정철(Jungcheol Park),김우석(Wooseok Kim),이종화(Jonghwa Lee),이병옥(Byungohk Rhee),박심수(Simsoo Park) 한국자동차공학회 2003 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
Compared to the conventional mixer system, the LPLi system can fine control the air fuel ratio, and thus resulting in outstanding emission reduction and power. But there are a few problems in the development. One of them is the Icing that occurs at the tip of the injector.<br/> If an Icing particle enters the combustion chamber, it effects the combustion and has the following problems; When the Icing particles enter the cylinder, the visualization has been performed the intake manifold and the injector tip. And the analysis of the exhaust gas shows that HC, CO, and O₂ increases while CO₂ and NOχ decreases after the<br/> Icing particle flows in the cylinder. These results are similar to when the combustion is unstable, and a rich value of the air-fuel ratio also proves incomplete combustion.<br/> An aim of this study removes the Icing from the injector tip. First, design parameter for removing the Icing, the O-ring Retainer changes plastic material to metallic material. Second, regarding to spray angle, injector insert depth is 7~10mm. Third, the injector insert hole diameter is about 10mm. It makes heat transfer between the injector tip and the intake manifold. Last, it is minimize depth of insulator.<br/>