http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이병권,김학진,정회경,Lee, Byung-Kwon,Kim, Hak-Jin,Jung, Hoe-Kyung 한국정보통신학회 2012 한국정보통신학회논문지 Vol.16 No.6
본 논문에서는 멀티레이어(Multi-layer) 기법을 이용한 A4 크기의 웹기반 POD(Print on Demand) 시스템을 설계 및 구현하였다. 이를 위해, 멀티레이어 기법을 활용하고, 접근성이 뛰어난 웹 서비스라는 환경을 이용하며, 템플릿을 생성 제공하고, 사용자가 쉽게 편집 할 수 있도록 제공하며, 편집한 파일과 동질의 인쇄물을 실시간으로 출력할 수 있는 웹 표준을 따르는 POD 시스템의 프레임워크(framework)를 제안한다. 이는 웹기반 전자출판 및 e-book 분야 등에서 널리 활용될 수 있을 것이다. In this paper, we design and implement A4 sized, web-based POP(Print On Demand) system using multi-layer technique. We Propose the framework of POP system, which uses multi-layer technique, uses highly accessible web-service, produces template, enables a user to easily edit, and allows the user to instantly print edited files. This system will be widely used in web-based electronic publication and e-book.
이병권,전영숙,전중남,Lee Byung-Kwon,Chon Young-Suk,Jeon Joong-Nam 한국정보처리학회 2006 정보처리학회논문지D Vol.13 No.3
구형 산업용 계측 장비들은 대부분 직렬 통신 기능만 갖추고 있다. 이러한 장비들을 인터넷으로 연결하기 위한 임베디드 통신 변환기를 구현하였다. 이 장비는 입출력 장치로 한 개의 WAN 포트, 두 개의 LAN 포트, 두 개의 직렬 포트를 갖고 있으며, 소프트웨어에 의하여 직렬 통신과 네트워크 통신 간의 상호 변환 기능을 수행하고, 기존의 직렬-이더넷 변환기와 구별되는 웹 모니터링 기능을 지원한다. ARM922T를 프로세서 코어를 사용하는 MICREL 사의 KS8695 네트워크 전용 칩셋을 사용하여 하드웨어를 구현하였고, 인터넷 기반 원격 제어를 위하여 웹 서버인 boa와 CGI 기능을 활용하였으며, 사설 IP 주소를 갖는 네트워크에서도 인터넷 접속이 가능하도록 IP 공유 기능을 추가하였으며, 통신 변환기의 역할을 수행하는 직렬-이더넷 변환 프로그램을 개발하였다. 그리고 개발된 통신 변환기를 태양열 에너지 전력 생산시스템의 원격 감시 장치로 활용하는 예를 제시하였다. Almost of industrial measuring instruments usually are equipped only with serial communication devices. In order to connect these instruments to internet, we implement an embedded translator. This device has the hardware components composed of one WAN port, two LAN ports, and two UARTs, and functions as a communication translator between serial and internet communication. it also provides web-based monitoring function that is absent from existing serial-to-ethernet converter. The hardware is implemented using the KS8695 network processor which s an ARM922T as processor core. We have installed the boa web server and utilized the CGI function for internet-based remote control, added the IP sharing function which allows the network with private IP addresses to access the internet, and developed a serial-to-ethernet translation program. Finally, we show an application example of the developed translator that remotely monitors the solar energy production system.
기존 공동주택의 슬래브 보강을 통한 바닥충격음 저감특성
이병권(Byung-kwon Lee),구본수(Bon-soo Koo),배상환(Sang-hwan Bae) 한국소음진동공학회 2016 한국소음진동공학회 학술대회논문집 Vol.2016 No.4
Existing apartments(30 years over) has increased to try remodeling by the aging of it. However, the existing apartment has a low story height. So it is difficult to increase the thickness of the slab. Therefore, in this study, while maintaining the story height, we are looking for a scheme that can be allowed to enhance the tensile strength of the slab to reduce the floor impact noise. Steel, carbon fiber and carbon panel, a reinforcing material, were examined to reduce the performance of the floor impact noise. As a result, the heavy weight floor impact noise showed the effect of reducing 1~3 dB, and the light weight floor impact noise was not reduced.
이병권(Byung Kwon Lee) 대한설비공학회 2012 대한설비공학회 학술발표대회논문집 Vol.2012 No.11
Noise between floor in apartment house consists of floor impact noise, sound transmission noise and drain noise. There are the prescribed performance standards of each noise source, but the overall alternatives and analyses of problems and affecting factors, which occur multiply in control methods, are not enough. Therefore, this study shows the evaluation and analysis of the factors affecting the noise in various situations and the practical construction of each noise source. Especially, in this study, the influence by the construction of floor impact noise and facilities factors and the sound insulation between bathrooms, and drain noise are discussed.
이병권(Byung-Kwon Lee),주영관(Ju Young-Kwan),김석일(Sukil Kim),전중남(Joong-Nam Jeon) 한국지능시스템학회 2004 한국지능시스템학회논문지 Vol.14 No.4
본 논문에서는 유비쿼터스 컴퓨팅의 시스템 구현 방법으로 임베디드 시스템을 활용시 다양한 플랫폼에 알맞은 파일시스템을 구축하는 방법에 대하여 기술한다. DOC(Disk-On-Chip) 파일시스템과 MTD(Memory Technology Devices)를 기반으로 플래시 메모리를 사용하는 파일시스템에 대한 정형화된 계층 구조를 구성하였다. DOC 파일시스템의 경우, 루트 파일시스템과 유저 파일시스템은 모두 M-Systems가 제공하는 TrueFFS로 구성한다. MTD 파일시스템의 경우, 루트 파일시스템은 속도가 빠른 램 디스크로 구성하고, 유저 파일시스템은 큰 용량을 지원할 수 있는 JFFS2로 구성한다. 또한, 두 가지 경우 모두 GUI(Graphic User Interface) 파일시스템의 구성을 위하여 Qt/E를 포팅하는 과정도 함께 제시한다. This paper explains the construction of the filesystems which could be utilized in embedded systems as an implementation of ubiquitous computing. It includes the formal architecture of filesystem hierarchy for the DOC (Disk-On-Chip) filesystem and the flash filesystem based on the MTD (Memory Technology Devices). For DOC, the root filesystem and the user filesystem are constructed by the TrueFFS supported by the M-Systems. For MTD filesystem, the root filesystem is implemented in the fast RAM disk, and the user filesystem is implemented in the JFFS2 that supports large capacity. In order to support the GUI filesystem, the porting process of Qt/E is also included in this paper.