http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
암반 터널에서의 시공단계를 고려한 암반-지보 거동특성 곡선적용에 관한 연구
이두화,추석연,임상빈,박영진,안성주,Lee, Du-Wha,Choo, Seok-Yean,Lim, Sang-Bin,Park, Young-Jin,Ahn, Sung-Joo 한국터널지하공간학회 2002 터널기술 Vol.4 No.2
Convergence Confinement Method (CCM) makes a more simple judgement in a ground-support reaction than numerical method. Also this method is good for the applicability of construction feedback and the analysis of field measurement. However, there has been little research with respect to the application of CCM in tunnel construction. One of the problems in CCM is a decision of the time to support installation. To decide a reasonable supporting installation time, support characteristic curve and displacement characteristic curve considering construction stage are proposed. In addition, to predict displacement distribution ratio and load distribution ratio, the time dependent support reaction curve is used. Finally, through a comparison of the result between CCM and numerical analysis, the trust of this study is proved and the practical application is proposed to control resonable tunnel construction management. 암반-지보 반응곡선법 (CCM, Convergence Confinement Method)은 수치해석적 접근방법에 비해 암반과 지보 반응특성에 대한 판단이 용이하고, 분석과정에서 발생하는 계산량이 많지 않으므로 현장 계측결과 분석 및 시급성이 요구되는 시공 Feedback 적용성이 뛰어나다. 그러나 종래 연구의 대부분은 기초적인 터널공학의 이해 측면이 강조되어 수행되고 있어 터널 시공과정에서의 CCM 활용에 관한 연구가 부족한 실정이다. 이러한 배경에서 본 연구에서는 기존의 암반-지보 반응곡선법의 주요 문제점 중 하나인 지보설치시기의 결정에 대한 합리적인 접근방법으로서 숏크리트 강도발현과정을 고려한 지보특성곡선 작성 방법을 제시하여, 지보재 설치시기를 용이하게 판단할 수 있는 변위특성곡선과 굴착에 따른 응력해방율을 쉽게 평가할 수 있는 하중특성곡선을 제시하였다. 이어서 기존의 지보재 강성만을 고려한 지보특성곡선이 아닌 시간의존성 지보특성곡선을 제시하여, 시간-변위특성곡선에 의한 변위분담율 뿐만 아니라 시간-하중에 의한 하중분담율 예측 방법을 제안하였다. 최종적으로, 본 연구방법에 의한 CCM 결과와 2차원 수치해석 결과를 비교,분석을 통해 연구결과의 신뢰성을 입증하는 동시에, 합리적인 터널 시공관리가 가능하도록 본 연구결과의 현장 활용 방안을 제시하였다.
고수압 조건에서의 세그먼트 방수성능평가에 대한 실험적 연구
추석연,박영진,김동현,김용일,이두화,조상국,Choo, Seok-Yean,Park, Young-Jin,Kim, Dong-Hyun,Kim, Yong-Il,Lee, Du-Wha,Cho, Sang-Kook 한국터널지하공간학회 2003 터널기술 Vol.5 No.4
본 논문에서는 쉴드TBM터널의 세그먼트 연결부 방수재로 기장 많이 사용되는 수팽창성 지수재와 가스켓의 방수성능을 실험을 통하여 평가하였다. 방수성능은 내수압방식으로 수행하였으며, 수팽창성 지수재의 방수성능을 평가하기 위하여 5일간의 수침기간을 두었다. 수팽창성 지수재는 일반적인 형태와 비팽창성고무가 결합된 형태의 두가지 방식을 적용하였고, 가스켓은 일반적으로 가장 많이 사용되는 EPDM가스켓과 수팽창성지수재가 부착된 복합형 가스켓을 적용하였다. 세그먼트의 방수성능은 시공오차 및 세그먼트 변형에 크게 의존하며, 일반적으로 이러한 시공오차 및 세그먼트 변형은 연결부 벌어짐 (Gap)과 연결부 엇갈림 (Offset)으로 표현된다. 이 Gap과 Offset에 따른 방수성능의 변화를 관찰한 결과, 세그먼트의 방수성능은 시공오차 중 Gap의 영향을 크게 받는 것을 확인할 수 있었으며, Gap과 Offset에 대한 관리기준치가 제시되었다. In this study, the performance of water tightness of water expansional sealing material and gasket was evaluated. The water tightness test was performed varying the type of inner pressure condition, for which the water expansional sealing material was inundated for 5 days to evaluate the ability of water tightness. In order to carry out this test, we made use of two types of water expansional sealing material; general type and combined type with non-expansional rubber. In the case of gasket, EPDM gasket and complex gasket sticked to the water expansional sealing material were applied. The performance of water tightness depended on the construction defect and the deformation of segment. The construction defect and segment deformation were generally expressed by gap and offset of the construction joint. The results, of tests showed that the performance of water tightness was largely influenced by the gap between segments. Management criteria of gap and offset were proposed.
박성재 ( Park Seung Jae ),마창남 ( Ma Chang Nam ),박명균 ( Park Myoung Gyun ),이두화 ( Lee Du Wha ),조수익 ( Jo Su Ik ) 한국구조물진단유지관리공학회 2010 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.14 No.1
Recently the construction of railway sections passing the central area of cities and stations under railway lines are increasing, and then it is urgently required to take the countermeasures against the railway vibration and the second-phase noise radiated from it. The most efficient countermeasure, out of technologies developed up to now, is the floating slab track which is the track system isolated from the sub-structure by springs. In other countries, the source technologies for anti-vibration design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the system design technology and technologies for key components are not yet developed, the foreign system are being introduced without any adjustment, and the key component, vibration isolator, depends on imports. Thus, the rate of technology self-support is very low. Therefore, to achieve the competitiveness in domestic and overseas markets, the core technologies of floating slab track and its components should be developed immediately.