층층나무 잎의 Phenol성 성분 (I)

이동호,이승호,정시련,노재섭,이경순,Lee, Dong-Ho,Lee, Seung-Ho,Chung, See-Ryun,Ro, Jai-Seup,Lee, Kyong-Soon 한국생약학회 1995 생약학회지 Vol.26 No.4

Twelve phenolic components were isolated from the aqueous acetone extract of the leaf of Cornus controversa H. (Cornaceae). On the basis of chemical and spectroscopic evidence, the structures of these components were established as gallic acid, $1-O-galloyl-{\beta}-{_D}-glucose$, $1,6-di-O-galloyl-{\beta}-{_D}-glucose$, $1,2,3-tri-O-galloyl-{\beta}-{_D}-glucose$, $1,2,6-tri-O-galloyl-{\beta}-{_D}-glucose$, 3,4,6-tri-O-galloyl ${_D}-glucose$, eugeniin, gemine D, quercetin, quercitrin, hyperoside and rutin.

초소형 수중 음향 시스템 모듈의 저잡음 설계 방법

이동호,신영산,송진호,위재경,이정민,설재수,Lee, Dong-Ho,Shin, Young-San,Song, Jin-Ho,Wee, Jae-Kyung,Lee, Jeong-Min,Seol, Jae-Soo 한국음향학회 2012 韓國音響學會誌 Vol.31 No.5

본 논문에서는 다중 전압을 사용하는 초소형 시스템 구성 및 모듈 설계 방법론을 제시한다. 특히 잡음에 취약한 아날로그 IC의 특성을 개선하기 위한 PDN 구성 방법과 필터 구성 방법에 중점을 두어 설계하였다. 이에 제작된 모듈은 고전압에 의한 잡음을 방지하기 위해 공급 전원별로 접지면을 분할하고, 이를 공통 접지면으로 구성하기 위해 필터를 연결하였으며, via stitching 기법을 사용하였다. 이를 본 논문에서는 PDN 구조를 Lumped 모델로 구성하여 시뮬레이션을 통해 분석하고, 측정을 통해 확인하였다. 시뮬레이션 결과 4.7 uH의 Inductor를 연결하였을 때, 공통 접지면을 사용했을 때보다 -7 dB의 잡음 감소 효과를 확인할 수 있었고, 측정 결과 약 12 %가 감소하였음을 확인할 수 있었다. This paper suggest configuration method of small-size system and design method of module using multi power. In particular module designed to focus on PDN(Power Distribution Network) and filter configuration method to improve the characteristics of noise sensitive analog IC. For the prevention of high-voltage noise, manufactured module is used the ground-isolated technique and via stitching, and is connected grounds with a series of filters. In this paper, so we analyzed PDN structure through the simulation using lumped modeling and confirmed through measurement. Simulation results, when connecting 4.7uH inductor, we made certain that noise of -7dB decreases much more than when it did not. And it was confirmed 12% less than Background Noise.

압전작동기로 구동 되는 보울 파트 피더의 모드 해석과 이송 속도 제어

이동호,최승복,김재환,Lee, Dong-Ho,Choe, Seung-Bok,Kim, Jae-Hwan 대한기계학회 2000 大韓機械學會論文集A Vol.24 No.4

This paper presents modal analysis and mean conveying velocity (M.C.V.) control of bowl parts feeder activated by piezoactuators. Bowl parts feeders are being widely used in many industry fields for automatic assembly line. In general, the electromagnet has been and being used as exciting actuator of these vibratory bowl feeders. However, because of complexity of its mechanism and limited capability of the electromagnet actuator, there exist various impending problems such as severe noise, nonlinear motion of parts, passive characteristics and so forth. As one of solutions for these problems, piezoelectric actuators as new actuating technology have been proposed recently to excite the bowl parts feeder. In this paper, modal analysis of the proposed model has been performed to examine the modal characteristics of the model by using commercial FEM software and modeling with respects to MCV is constructed. Finally, MCV of the parts is to be controlled to track the desired one with PID controller.

치과용 임플란트 주위 열손 결손에 대한 차폐막의 유도조직재생에 관한 연구

이동호,최상묵,Lee, Dong-Ho,Choi, Sang-Mook 대한치주과학회 1995 Journal of Periodontal & Implant Science Vol.25 No.2

The purpose of this study was to evaluate a new biodegradable membrane - atelocollagen as a guided tissue regeneration barrier on the dehiscence defects adjacent to the dental implants. 3 beagle dogs were selected for this study and all the mandibular premolars($P_1,P_2,P_3&P_4$) were extracted. Twelve weeks after the extraction, the edentulous ridges were formed to be placed the titanium plasma-sprayed IMZ implants. Four implant osteotomies were performed on each side of the mandible. The osteotomies were placed facially in the edentulous ridges to approximate an actual dehiscence defect as closely as possible, The standardized dehiscence defects were created 3 mm in width and 4 mm in height by osteotomy. A total 24 implants were placed. e-PTFE, ateloco11agen and $Collatape^{(R)}$ were placed to cover the defects and the one defect served as a control, not covered any membrane. By random selection, three dogs were sacrificed at 2 weeks, 4weeks and 8 weeks after fixation with 3% glutaraldehyde. A week before sacrificing, 8-week dog was infused intravenously with oxy-tetracycline 30mg/kg. The left mandibular blocks were used for full decalcified histologic preparation and the right mandibular blocks were selected for undeca1cified preparation, At 2 weeks, the regenerated bone of e-PTFE and atelocollagen groups appeared to be more dense than other groups and the percentage of bone defect fill was highest for e-PTFE and follwed by ateloco1lagen group. However, the $Collatape^{(R)}$ and control groups showed a little new bone formation. $Collatape^{(R)}$ was almost degraded within 2 weeks. At 4 weeks, the regenerated new bone were much greater and denser than at 2 weeks for e-PTFE and ateloco11agen group. Although a part of atelocollagen bagan to be degraded at the margin and surrounded by foreign body giant cells related to foreign body reaction, it was generally intact and the regenerated new bone was shown much more than at 2 weeks. The amount of new bone in $Collatape^{(R)}$ and control groups at 4 weeks were similar to that of 2 weeks group. At 8 weeks, the regenerated bone was matured and observed along the implant fixture. Direct new bone formation and calcium deposits beneath the e-PTFE were observed. No further bone growth was seen in the $Collatape^{(R)}$ and control groups. In reflected fluoromicrcocopic observation, the osteogenic activity was pronounced between e-PTFE membrane and the old bone. High osteogenic activity was also observed in atelocol1agen group. This study suggested that the ateloco11agen as well as e-PTFE could be used for guided tissue regeneration on dehiscence defects adjacent to the dental implants. But the $Collatape^{(R)}$ was completely resorbed within 2 weeks and was not a suitable membrane for guided bone regeneration.

일관성있고 체계적인 지원 육성

이동호,Lee, Dong-Ho 한국전자정보통신산업진흥회 1981 電子振興 Vol.1 No.4

전기도금 방법으로 제작한 코일을 이용한 초소형 발전기의 특성분석

이동호,김성일,김영환,김용태,박민철,이창우,백창욱,Lee, Dong-Ho,Kim, Seong-Il,Kim, Young-Hwan,Kim, Yong-Tae,Park, Min-Chul,Lee, Chang-Woo,Baek, Chang-Wook 한국마이크로전자및패키징학회 2006 마이크로전자 및 패키징학회지 Vol.13 No.3

We have designed and fabricated micro power generators by electroplating which is important in MEMS(micro electro mechanical system) technique. We have electroplated MEMS coils on the glass substrates and have chosen one of these coils for experiments. The thickness, width, and length of the coil are $7{\mu}m,\;20{\mu}m$, and 1.6 m, respectively. We have analyzed the structure of MEMS coil by SEM. We have made a vibrating system for reproducible results in measurement. With reciprocating a magnet on the surface of a fabricated winding coil, the micro power generator produce an alternating voltage. We have changed the vibrational frequency from 0.5 Hz to 8 Hz. The generated voltage was 106 mV at 3 Hz and 198 mV at 6 Hz. We aim at the micro power generator which can change vibration energy to useful electric energy. 전기도금 방법으로 유리기판 위에 제작한 코일과 영구자석을 이용하여 초소형발전기를 제작하였다. 여러 크기의 코일 구조를 설계한 마스크를 제작하고, 이를 이용하여 MEMS 코일을 제작하였다. 그 중 두께가 $7{\mu}m$ 선폭이 $20{\mu}m$ 길이가 1.6 m인 코일을 선택하여 실험하였다. 광학현미경과 SEM을 사용하여 제작된 코일의 구조를 분석하였다. 또한 모터의 회전운동을 진동운동과 유사한 선형운동으로 변환하는 진동발생시스템을 제작하였고, 자석과 코일을 진동발생장치에 설치하고 진동을 발생시키면 교류 전압이 발생한다. 0.5Hz에서 8Hz까지 진동주파수를 변화시켜 특성을 측정하였다. 발생된 전압은 3Hz에서 106mV가 발생하였고, 6Hz에서 198mV가 발생하였다. 본 연구의 목적은 쓸모없이 버려지는 진동에너지를 유용한 전기에너지로 변환하는 초소형발전기 소자를 제작하는 것이다.

GIS를 이용한 방음벽의 설계풍하중 산정방법

이동호,최세휴,Lee, Dong-Ho,Choi, Se-Hyu 한국공간정보학회 2015 한국공간정보학회지 Vol.23 No.5

최근 국지적 강품 및 태풍에 의한 방음벽의 변형 또는 파괴가 증가하고 있다. 본 연구에서는 1:5,000 수치지형도를 바탕으로 공간정보분석을 이용하여 방음벽의 설계풍하중 산정방법을 제시하였으며 실제 적용사례와 비교분석 하였다. GIS를 이용한 정량적인 평가 결과 건축물이 밀집한 도심지 구간은 지표조도가 III으로, 건물이 상대적으로 적은 교외지역에서는 지표조도가 II로, 개활지와 전형적인 농가밀집 지역은 지표조도가 I로 판정되는 등 실제 지표의 상태를 반영한 방음벽의 풍하중을 산정 할 수 있었다. 본 연구에서 제시한 정량적인 GIS 분석을 방음벽의 내풍설계에 반영한다면, 설계자의 주관에 따라 풍하중이 변화되는 기존의 문제점을 완화하여 보다 합리적인 내풍설계가 이루어 질 수 있을 것으로 판단된다. Recently deformed or destroyed of soundproof wall by local winds and typhoon has increased. This research proposed the estimation method of the design wind load of soundproof wall using spatial information analysis based on 1:5,000 digital map and performed comparative analysis with actual application cases. According to the result of quantitative evaluation using GIS, the surface roughness in the downtown area packed with buildings was III and the surface roughness in the suburban district with a relatively small number of buildings was II and the surface roughness in the district packed with open areas and typical farmhouses was I. This shows that the wind load of the soundproof walls reflecting the actual surface conditions was estimated. If the quantitative GIS analysis presented in this study is applied to wind-resistant design of soundproof walls, it is supposed that this will be helpful in more rational wind-resistant design by remedying the existing problem in which the wind load varies depending on designer's subjectivity.

글릿칭을 최소화한 자기동기형 저전력 가산기 설계

이동호,유범선,김문수,조태원 ( Dong Ho Lee,Beom Seon Ryu,Moon Su Kim,Tae Won Cho ) 충북대학교 산업과학기술연구소 1996 산업과학기술연구 논문집 Vol.10 No.2

Abstract_Roman Unwanted spurious transition and associated power are inherent disadvantages of a static logic design. In this paper, 1ow pawer self-timed SBPL (Swing Restored Pass-transistor Logic) circuits which combine the merits of dynamic and static

항공기 엔진산업의 특성과 현황

이동호,Lee, Dong-Ho 한국항공우주산업진흥협회 1996 航空宇宙 Vol.42 No.-

Polymerization of Ethylene Initiated with Polymethylene - bridged Dinuclear Zirconocene Catalysts

이동호,이헌봉,윤근병,노석균 ( Dong Ho Lee,Hun Bong Lee,Keun Byung Yoon,Seok Kyun Noh ) 한국공업화학회 1997 한국공업화학회 연구논문 초록집 Vol.1994 No.1