http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고속 플래시 AD 변환기를 위한 Successive Selection Encoder의 Logical Effort에 의한 설계
이기준,김병수,Lee Kijun,Choi Kyusun,Kim Byung-soo 대한전자공학회 2005 電子工學會論文誌-SD (Semiconductor and devices) Vol.42 No.4
고속 flash ADC를 위하여, Successive Selection Encoder (SSE)라고 명명된 새로운 형태의 TC-to-BC encoder를 제안한다. 기존의 fat tree encoder가 OR 논리에 의하여 동작되는데 반하여, 제안된 SSE는 MUX 논리에 의하여 입력 TC 신호 들 중에서 직접 출력 BC 신호를 선택한다. 제안한 SSE의 구현을 위하여, Logical Effort 방법과 Hynix 0.25um 제조 공정에 의한 실험을 바탕으로 효율적인 SSE의 구현 구조를 정하였다. 이론적 모델과 실험 결과를 보면, SSE가 fat tree encoder에 비하여 (1) one-out-of-n 신호를 발생할 필요가 없고, (2) 사용되는 게이트 수는 약 1/3로 감소하며, (3) 동작속도는 2배 이상 빨라진다. 제안된 SSE는 고속 ADC에 적합한 TC-to-BC encoder로 사용될 수 있다. In this paper, a new type of the TC-to-BC encoder for high speed flash ADC's, called the Successive Selection Encoder (SSE), is proposed. In contrast to the conventional fat tree encoder based on OR operations, the W- outputs, in the new design, are obtained directly from TC inputs through simple MUX operations. The detailed structure of the SSE has been determined systematically by the method of the logical effort and the simulation oil Hynix 0.25um process. The theoretical and experimental results show that (1) it is not required to generate one-out-of-n signals, (2) the number of gates is reduced by the factor of 1/3, and (3) the speed is improved more than 2-times, compared to the fat tree encoder. It is speculated that the SSE proposed in this study is an effective solution for bottleneck problems in high speed ADCs.
주성분분석(PCA) 기법에 기반한 CNG 충전소의 이상감지 모니터링 및 진단 시스템 연구
이기준(Kijun Lee),이봉우(Bong Woo Lee),최동황(Dong-Hwang Choi),김태옥(Tae-Ok Kim),신동일(Dongil Shin) 한국가스학회 2014 한국가스학회지 Vol.18 No.3
본 연구에서는 비정상상태 운전을 기본으로 하는 CNG 충전소를 대상으로 다변량 통계분석방법 중의 하나인 다차원의 대용량 데이터 처리에 적합한 주성분분석(PCA) 기법을 사용하여 실시간 이상감지 및 진단이 가능한 모니터링 시스템을 제안하였다. CNG 충전소로부터 매초 간격으로 수집되는 7개의 압력센서 데이터와 5개의 온도센서 데이터의 주요 경향을 나타내는 변수들의 조합으로 주성분이라 불리는 새로운 특성 변수들을 산출하고, 분산의 분포를 통해 특성변수의 계산으로부터 모델을 구축하였다. 모니터링은 구축된 모델을 통해 운전 중의 실시간 데이터를 반영하여 진행된다. 시스템 검증 및 정확성을 개선하기 위해 모니터링 테스트를 수행한 결과, 정상상태의 모든 데이터를 정상으로 판단하였고, 이상 데이터의 성공적인 검출 시 관련 변수를 추적하여 비정상 원인을 찾아낼 수 있었다. In this study, we suggest a system to build the monitoring model for compressed natural gas (CNG) stations, operated in only non-stationary modes, and perform the real-time monitoring and the abnormality diagnosis using principal component analysis (PCA) that is suitable for processing large amounts of multi-dimensional data among multivariate statistical analysis methods. We build the model by the calculation of the new characteristic variables, called as the major components, finding the factors representing the trend of process operation, or a combination of variables among 7 pressure sensor data and 5 temperature sensor data collected from a CNG station at every second. The real-time monitoring is performed reflecting the data of process operation measured in real-time against the built model. As a result of conducting the test of monitoring in order to improve the accuracy of the system and verification, all data in the normal operation were distinguished as normal. The cause of abnormality could be refined, when abnormality was detected successfully, by tracking the variables out of the score plot.
화재감지 오보 감소를 위한 다중정보기반 시스템의 Test Bed 설계
이기준(Kijun Lee),김형권(Hyeong Gweon Kim),이봉우(Bong Woo Lee),김태옥(Tae-Ok Kim),신동일(Dongil Shin) 한국가스학회 2012 한국가스학회지 Vol.16 No.6
화재감지 시스템은 화재발생 시 위험 감지 및 전파를 위해 사용되고 있는데, 현재 사용 중인 대부분의 화재감지 시스템은 실보와 비화재보의 가능성으로부터 오동작이 빈번하게 발생한다. 본 연구에서는 화재감지의 신뢰성 개선을 위해 열 감지기, 연기 감지기 및 일산화탄소 농도 감지기의 3가지 독립정보를 통합적으로 이용하여 화재를 감지하는 알고리즘을 제안하고, LabVIEW를 이용하여 test bed를 구축하여 검증하였다. 즉, NIST의 Fire Research Division에서 제공하는 상황별 센서 측정 데이터를 이용하여 시뮬레이션을 진행하였으며, 실보와 비화 재보의 가능성을 저감시키는 것을 확인할 수 있었다. Fire detection system is used for detection and alarm-generation of danger in case of fire. Most fire detection systems being used these days often malfunction from false positive and false negative errors. To improve detection reliability, an integrated fire detection algorithm using multi-senor information of heat, smoke and carbon monoxide detectors is suggested, then built and tested using the LabVIEW environment. Simulated using sensor measurement data offered by National Institute of Standards and Technology (NIST), possibility of reducing false positive and false negative errors is verified.
설치비와 피해액의 정형화를 통한 화재 시뮬레이션 및 수리계획법에 기반을 한 스프링클러의 배치 최적화
이기준(Kijun Lee),신영섭(Youngsup T. Shin),홍기훈(Gi Hoon Hong),주기돈(Kidon Joo),신동일(Dongil Shin),김태옥(Tae-Ok Kim) 한국가스학회 2012 한국가스학회지 Vol.16 No.2
본 연구에서는 화재로부터 가장 효과적인 소화설비로 평가받고 있는 스프링클러 시스템에 대해 화재 시뮬레이션과 수리계획법에 기반을 한 최적 배치방법을 제안하였다. 사례연구로, 5.2 m(L)×5.4 m(W)×2.4 m(H) 크기의 일반 주거지 형태를 대상공간으로 설정하고, 부주의로 폴리우레탄 소재의 소파에 불이 인화되어 화재가 전이되는 시나리오를 구성하였다. 그리고 스프링클러의 종류와 개수에 따른 소화속도, 온도변화, 표면 열방출률을 시뮬레이션을 통해 분석하고, 공간 균등배분 방법으로 설치된 스프링클러의 설치비와 화재 피해액의 정형화를 바탕으로, 수리계획법을 이용하여 최적 소화성능의 스프링클러 배치시스템을 얻을 수 있었다. The sprinkler system is regarded as the most effective fire extinguishing system. In this study, we proposed a sprinkler layout optimization framework based on fire simulation and mathematical programming. As a case study, the target space in the form of ordinary residence was set up with the size of 5.2 m(L)×5.4 m(W)×2.4 m(H), and we constructed the fire scenario that polyurethane couch was ignited through carelessness. And we simulated and analyzed fire speed, temperature change and heat release rate according to the type and number of sprinklers installed. Through the formulation of installation and damage costs depending on sprinklers, the sprinkler layout showing optimal performance was resulted from mathematical programming.
전력할당을 통한 LDPC부호의 높은 SNR에서의 성능개선 방법
이기준(Kijun Lee),정하봉(Habong Chung),임주혁(Juhyuk Im),최은아(Eun-A Choi),장대익(Dae-Ig Chang) 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.10C
본 논문에서는 유한 길이 LDPC 부호의 높은 신호대 잡음비(SNR)에서 성능 향상을 위한 방법으로 비균등 전력할당 방법을 제안한다. 밀도진화(density evolution)를 통해서 얻어진 Tanner 그래프의 변수 노드와 체크 노드간의 연결 분포(degree distribution)와 실제 사용되는 부호의 연결 분포 간의 차이를 변수 노드의 차수에 따라 해당 비트에 전력을 비균등하게 할당하는 방법을 이용한다. 본 논문에서는 IEEE 802.16e 표준에 제시되어 있는 부호를 이용하여 모의실험을 수행하였고, 비교적 높은 SNR에서 성능이 향상됨을 볼 수 있었다. In this paper, we suggest the power allocation method which enhances the performance in high SNR for LDPC codes. In this method, bit power is unequally allocated proportionally to the difference of the degree distributions of variable and check nodes of Tanner graph between practically used codes and the codes optimized by density evolution. Simulation is performed to the codes in IEEE 802.16e standards, and the results show that the proposed method works well in high SNR.
변수노드의 차수가 3인 정칙 LDPC 부호의 Absorbing 집합에 관하여
이기준(Kijun Lee),정하봉(Habong Chung),장환석(Hwanseok Jang) 한국통신학회 2009 韓國通信學會論文誌 Vol.34 No.10C
본 논문에서는 변수노드의 차수가 3인 정칙 LDPC 부호의 absorbing 집합(AS)에 대한 여러 가지 성질을 알아본다. Girth가 인 경우, 가장 작은 absorbing 집합은 AS임을 보였고, 인 경우 이 AS가 가장 작은 fully absorbing 집합임을 증명하였다. 또한 (3,5) Tanner LDPC 부호에서 오류 마루의 주원인으로 꼽히는 몇몇 absorbing 집합의 critical number를 유도하였다. In this paper, we investigate into the existence and various properties of absorbing sets in regular LDPC codes with variable node degree three. Also, we figure out the critical number of some absorbing sets that are believed to be the major cause of error floor in (3,5) Tanner LDPC codes.