http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2-사이클 열펌프 건조기에서 건조과정에 대한 실험적 연구
이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim),김종률(Jong-Ryul Kim),이상열(Sang-Ryoul Lee) 대한설비공학회 2008 대한설비공학회 학술발표대회논문집 Vol.2008 No.2
Heat pump drying has a great potential for energy saving due to its high energy efficiency in comparison to conventional air drying. The heat pump dryer is usually operated at the temperature less than 50°C and the drying temperature is limited to the operating temperature of the heat pump system. In order to increase the drying temperature, the special box-type heat pump dryer has been developed. The dryer uses the two-cycle heat pump system which has the two heat pump cycles for high and low temperature heating. The high temperature cycle uses the refrigerant 124 to get the temperature greater than 80°C and the low temperature cycle uses the refrigerant 134a. The drying experiment has been carried out to figure out the performance of the dryer with the selected drying material.
이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim),김종률(Jong-Ryul Kim),이상열(Sang-Ryoul Lee) 대한기계학회 2009 대한기계학회 춘추학술대회 Vol.2009 No.11
The drying experiment has been carried out to figure out the performance of the two-cycle heat pump dryer. The heat pump dryer is usually operated at the temperature less than 50℃ and the drying temperature is limited to the operating temperature of the heat pump system. In order to increase the drying temperature, the special box-type heat pump dryer has been developed. The dryer uses the two-cycle heat pump system which has the two heat pump cycles for high and low temperature heating. The high temperature cycle uses the refrigerant 124 to get the temperature greater than 80℃ and the low temperature cycle uses the refrigerant 134a. In the experiment with drying temperature from 60 to 80℃, the COP of the heat pump system and the thermal efficiency of the dryer have been evaluated.
이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim) 대한기계학회 2006 대한기계학회 춘추학술대회 Vol.2006 No.11
Heat pump drying has a great potential for energy saving due to its high energy efficiency in comparison to conventional air drying. In the present study, the performance simulation for the basic design of a heat pump dryer has been carried out. The simulation includes one-stage heat pump cycle, simple drying process using the drying efficiency. As an example, the heat pump cycle with Refrigerant 134a has been investigated. For the operating conditions such as the average temperature of the condenser, the heat rate released in the condenser, the flow rate of drying air, and drying efficiency, the simulation has been carried out to figure out the performance of the dryer. The parameters considered in the design of the dryer are COP, MER, SMER, the rate of dehumidification, the temperature and humidity of drying air and those parameters are compared for different conditions after carrying out the simulation.
순환 공기 유량의 변화를 고려한 열펌프 건조기의 성능 해석
이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim),이상열(Sang-Ryoul Lee) 대한설비공학회 2009 설비공학 논문집 Vol.21 No.1
The simulation of a heat pump dryer has been carried out to figure out the effect of air flow rate on the drying performance represented by MER, SMER, and so on. The simulation includes the analyses of one-stage heat pump cycle and simple drying process using the drying efficiency. The heat pump cycle with Refrigerant 134a has been considered. In the dryer, some of drying air from the drying chamber flows through the heat pump system, the rest of air bypasses the heat pump system. The two air flows joins before the drying chamber inlet. The performance parameters considered in the present study are MER, SMER, the temperature and humidity of drying air. Those parameters are compared for different total air flow rate or bypass air flow rate.
일정온도로 가열되는 원통 형상 슬러지 박막의 건조에 대한 3차원 해석
이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
Drying process in the cylindrical thin film layer of sludge with the thickness less than a few millimeters has been investigated. Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface through which thermal energy is supplied to the layer during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of some physical parameters on drying has been examined to figure out the drying characteristics of the sludge layer.
원통 형상의 슬러지 박막 건조에 대한 박막 두께의 영향
이공훈(Kong Hoon Lee),김욱중(Ook Joong Kim) 대한설비공학회 2010 대한설비공학회 학술발표대회논문집 Vol.2010 No.6
Thin film drying is specially designed and used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic cylindrical surface using thermal energy transferred by conduction during drying. The wall temperature is assumed to be constant during drying in the present study for the simplification. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of sludge film thickness on drying has been investigated to figure out the drying characteristics of the sludge layer.