초음파를 통해 경과관찰한 비복근 부분파열 환자의 한의학적 치료: 증례보고

윤영훈,김혜민,김재수,이현종,임성철,이윤규,Youn, Young Hoon,Kim, Hye Min,Kim, Jae Su,Lee, Hyun Jong,Lim, Sung Chul,Lee, Yun Kyu 경락경혈학회 2022 Korean Journal of Acupuncture Vol.39 No.3

Gastrocnemius muscle partial rupture is a common muscle injury. This case is report on a patient with a gastrocnemius muscle partial rupture who was continuously observed with ultrasonography while receiving Korean medicine treatment. Acupuncture, pharmacoacupuncture, herbal medicine, physical therapy and rehabilitation treatment were performed on a patient diagnosed with gastrocnemius partial rupture. The improvement of symptoms was evaluated using Numeric Rating Scale (NRS), Range of Motion (ROM) of ankle, circumference of calf and size of hematoma by using ultrasonography. NRS decreased more than 90%, ROM of ankle joint gradually improved, calf circumference improved, and hematoma reduced by more than 90% when measured by ultrasonography. In this study, gastrocnemius muscle partial rupture was observed with ultrasonography, and it is considered that the Korean medical treatment is useful for gastrocnemius muscle partial rupture.

RF 마그네트론 스퍼터링법으로 합성된 Ga-doped ZnO 박막의 특성평가

윤영훈,Yun, Young-Hoon 한국결정성장학회 2021 韓國結晶成長學會誌 Vol.31 No.2

RF 마그네트론 스퍼터링 공정에 의해 Ga-doped ZnO 박막이 O2 및 Ar 분위기 하에서 증착 조건에 따라 합성되었으며, N2 분위기에서, 600℃에서 급속열처리(RTA)를 실시하였다. 증착된 ZnO : Ga 박막에 대해 두께를 측정하였고, XRD 패턴 분석에 의해 결정상을 조사하였으며, FE-SEM, AFM 이미지에 의해 박막의 미세구조를 관찰하였다. O2 및 Ar 분위기 기체 종류별로 형성된 박막들의 증착 조건에 따라 X-선 회절 패턴의 (002)면의 세기는 상당한 차이를 나타냈다. O2 조건에서는 Ga doping이 이루어진 단일 박막의 경우에서는 강한 세기의 회절피크가 관찰되었다. O2 및 Ar 조건에서는 Ga doping이 이루어진 다층박막의 경우에서는 다소 약한 세기의 (002) 면의 피크만을 나타내었다. FE-SEM image에서는 박막의 표면입자의 크기는 두께가 증가함에 따라 입자크기가 다소 증가하는 것으로 관찰되었다. O2 및 Ar 분위기 조건 하에서, Ga doping이 이루어진 다층박막의 경우에서는, 비저항은 6.4 × 10-4Ω·cm을 나타냈고, O2 분위기 조건하에서, Ga doping이 이루어진 단일 박막의 경우에서는 저항값이 감소하였고, Ga-doped ZnO 박막의 두께가 2 ㎛로 증가하면서 저항이 감소하였으며, 1.0 × 10-3 Ω·cm의 비교적 낮은 비저항 값을 나타내었다. Ga-doped ZnO thin films by RF magnetron sputtering process were synthesized according to the deposition conditions of O2 and Ar atmosphere gases, and rapid heat treatment (RTA) was performed at 600℃ in an N2 atmosphere. The thickness of the deposited ZnO : Ga thin film was measured, the crystal phase was investigated by XRD pattern analysis, and the microstructure of the thin film was observed by FE-SEM and AFM images. The intensity of the (002) plane of the X-ray diffraction pattern showed a significant difference depending on the deposition conditions of the thin films formed by O2 and Ar atmosphere gas types. In the case of a single thin f ilm doped with Ga under O2 conditions, a strong diffraction peak was observed. Under O2 and Ar conditions, in the case of a multilayer thin film with Ga doping, only a peak on the (002) plane with a somewhat weak intensity was shown. In the FE-SEM image, it was observed that the grain size of the surface of the thin film slightly increased as the thickness increased. In the case of a multilayer thin film with Ga doping under O2 and Ar atmosphere conditions, the specific resistance was 6.4 × 10-4 Ω·cm. In the case of a single thin film with Ga doping under O2 atmosphere conditions, the resistance of the thin film decreased. The resistance decreased as the thickness of the Ga-doped ZnO thin film increased to 2 ㎛, showing relatively a low specific resistance of 1.0 × 10-3 Ω·cm.

고분자전해질 연료전지용 금속 바이폴라 플레이트의 표면코팅

윤영훈 ( Young Hoon Yun ) 조선대학교 공학기술연구원 2008 공학기술논문지 Vol.1 No.2

The metallic film and conductive oxide film were formed on stainless steel 316 and 304 plates by a puttering method and an E-beam method, respectively. Also, the external metallic region of the stainless steel bipolar plates was converted into the metal nitride films through an annealing process. Besides, the surface region of commercial stainless steel 304 and 316 plates was modified through tile deposition of the multi-layered coatings composed of titanium film (0.1 ㎛) and gold film (1-2 ㎛) by an electron beam evaporation method. The XRD patterns of the thin film on the stainless steel bipolar plates modified with the metallic film and conductive oxide showed two metal nitride phase of CrN and Cr2N compounds. The FE-SEM images of the metal nitride film, which was formed on stainless steel bipolar plates, clearly showed the microstructural morphology of fine columnar grains with 0.0 1 ㎛ diameter and 0.06 ㎛ length. On the other hand, the XRD pattern of the stainless steel plates deposited with conductive metal films showed the peaks of the external gold film and the stainless steel substrate, In case of the stainless steel plates modified with 0.1 ㎛ titanium film and 1 ㎛ gold film showed microstructure of grains of under 0.1 ㎛ diameter. Finally, the electrical resistance and water contact angle of the surface modified stainless steel bipolar plates were examined to investigate their applicability in preparing PEMFC.

복부 둔상 및 유강장기 손상에 있어서 초기 나선형 복부전산화 단층촬영의 진단적 가치

조영덕 ( Young Duck Cho ),홍윤식 ( Yun Sik Hong ),이성우 ( Sung Woo Lee ),최성혁 ( Sung Hyuk Choi ),윤영훈 ( Young Hoon Yoon ),임성익 ( Sung Ik Lim ),장익진 ( Ik Jin Jang ),백승원 ( Seung Won Baek ) 대한외상학회 2008 大韓外傷學會誌 Vol.21 No.1

Purpose: This study was conducted to examine the clinical significance IV-contrasted helical abdomen computed tomography (CT) as a diagnostic screening tool to evaluate hollow viscus injury in blunt abdominal trauma patients. Methods: This is a retrospective study encompassing 108 patients, presenting to Korea University Medical Center (KUMC) Emergency Department (ED) from January 2007 to December 2007, with an initial CT finding suggestive of intra-abdominal injury. An initial non-enhanced abdomen CT was taken, followed by an enhanced CT with intravenous contrast. Patients` demographic data, as well as the mechanisms of injury, were inquired upon and obtained, initial diagnosis, as dictated by specialized radiologists, were added to post-operational (post-OP) findings and to additional CT findings acquired during their hospital stays, and all were combined to arrive at final diagnosis. Initial CT findings were further compared with the final diagnosis, yielding values for sensitivity, specificity, and accuracy, as well as positive and negative predictive values. Patients were further divided into two groups, namely, those that underwent operational intervention and those that did not. The initial CT findings of each group were subsequently compared and analyzed. Results: Initial CT scans revealed abnormal findings in a total of 212 cases - solid organ injuries being the most common finding, as was observed in 97 cases. Free fluid accumulation was evident in another 69 cases. Based on the CT findings, 77 cases (71.3%) were initially diagnosed as having a solid organ injury, 20 cases (18.5%) as having a combined (solid organ + hollow viscus) injury, and 11 cases (10.2%), as having an isolated hollow viscus injury. The final diagnosis however, were somewhat different, with only 67 cases (62.0%) attributed to solid organ injury, 31 cases (28.7%) to combined injury (solid + hollow), and 10 cases (9.3%) to hollow viscus injury. The sensitivity (CI 95%) of the initial helical CT in diagnosing hollow viscus injury was 75.6%, and its specificity was 100%. The accuracy in diagnosing hollow viscus injury was also meaningfully lower compared to that in diagnosis of solid organ injury. Among patients initially diagnosed with solid organ injuries, 10 patients (2 from follow-up CT and 8 from post-OP finding) turned out to have combined injuries. A total of 38 patients underwent an operation, and the proportion of initial CT findings suggesting free air, mesenteric hematoma or bowel wall thickening turned out to be significantly higher in the operation group. Conclusion: Abdominal CT was a meaningful screening test for hollow viscus injury, but the sensitivity of abdominal CT was significantly lower in detecting hollow viscus injury as compared to solid organ injury. This calls for special consideration and careful observation by the ED physicians when dealing with cases of blunt abdominal trauma.

Zinc Gallate (ZnGa₂O₄)박막 형광체의 합성과 발광특성

김수연,윤영훈,최성철,Kim, Su-Youn,Yun, Young-Hoon,Choi, Sung-Churl 한국세라믹학회 2007 한국세라믹학회지 Vol.44 No.1

Zinc gallate $(ZnGa_2O_4)$ thin film phosphors have been formed on ITO glass substrates by a sol-gel spinning coating method. For the formation of the film phosphors, the starting materials of zinc acetate dihydrate, gallium nitrate hydrate and 2-methoxyethanol as a solution were used. The thin films deposited were firstly dried at $100^{\circ}C$ and fired at $500^{\circ}C\;or\;600^{\circ}C$ for 30 min and then, annealed $500^{\circ}C\;or\;600^{\circ}C$ at for 30 min under an annealing atmosphere of 3% $H_2/Ar$. The thin films deposited on ITO glass plates showed the (220), (222), (400), (422), (511), and (440) peaks of spinel structure as well as the (311) peak indicating a standard powder diffraction pattern. The surface morphologies of the thin film phosphors were observed with a firing and an annealing condition. The $ZnGa_2O_4$ film phosphors showed the blue emission spectra around 410 nm as well as the emission spectra in the UV region (360-380 nm).

탄화왕겨, 제지슬러지, 커피찌거기 및 실리카 혼합물로부터 탄화규소 결정체 합성

박경욱,윤영훈,Park, Kyoung-Wook,Yun, Young-Hoon 한국결정성장학회 2019 한국결정성장학회지 Vol.29 No.2

본 연구에서는, 탄소성분으로서 탄화왕겨, 제지슬러지, 커피찌꺼기와 실리카 분말로부터, 비교적 미세한 탄화규소 결정질 응집체를 합성하였다. 탄소성분들과 실리카의 혼합물로부터 탄화규소 응집체를 얻기 위한 주요 반응물질은 열탄화환원 반응에 의해 생성된 일산화규소 기체로 추정되었다. 탄화왕겨, 제지슬러지, 커피찌꺼기와 실리카 분말의 혼합물로부터 열탄화환원반응법을 거쳐 생성된 탄화규소 결정질 응집체들에 대한 XRD 회절패턴으로부터 결정상을 분석하였고, FE-SEM과 FE-TEM을 통한 미세구조, 결정구조 분석이 이루어졌다. 탄화왕겨, 제지슬러지, 그리고 실리카 분말의 시료의 경우, XRD 분석에서는 $35^{\circ}$ 부근의 (111) peak은 비교적 높은 강도를 나타내었다. 탄화왕겨, 제지슬러지, 커피찌꺼기와 실리카 분말의 혼합물로부터 합성된 시료들에 대해 FE-SEM 관찰을 통하여 $1{\mu}m$ 이하의 미세입자들을 관찰하였으며, TEM 측정 결과에서는 탄화규소 결정질상의 (110) 회절패턴들을 확인하였다. Relatively fine silicon carbide (SiC) crystalline aggregates have been synthesized with the carbonized rice husks, paper sludge, coffee grounds as the carbon sources and the silica powder. The main reaction source to obtain silicon carbide (SiC) aggregates from the mixture of carbon sources and silica was inferred as the gaseous silicon monoxide (SiO) phase, being created from this mixture through the carbothermal reduction reaction. The silicon carbide (SiC) crystalline aggregates, fabricated from the carbonized rice husks and paper sludge, coffee grounds and silica ($SiO_2$) powder, were investigated by XRD patterns, FE-SEM and FE-TEM images. In these specimens, obtained from the carbonized rice husks, paper sludge and silica, XRD patterns showed rather high strong peak of (111) plane near $35^{\circ}$. The FE-TEM images and patterns of specimens, synthesized from carbonized rice husks, paper sludge, coffee grounds and silica under Ar atmosphere, showed relatively fine particles under $1{\mu}m$ and crystalline peak (110) of silicon carbide (SiC) diffraction pattern.

구연 / 제 4 회의장 / 간 19 : Stage Iva 의 진행성 간암에서 간동맥내 항암제 주입약제에 따른 치료성적과 예후인자

안상훈(Sang Hoon Ahn),한광협(Kwang Hyub Han),윤영훈(Youn Young Hoon),김진석(Jin Suk Kim),전재윤(Chae Yoon Chon),문영명(Young Myung Moon),이도연(Do Yun Lee),이종태(Jong Tae Lee) 대한소화기학회 1999 대한소화기학회 추계학술대회 Vol.1999 No.-

토지이용계획에 있어서 GSIS의 응용에 관한 연구 - 쓰레기 매립장의 적지 선정을 중심으로 -

양인태,김응남,윤영훈,Yang, In Tae,Kim, Eung Nam,Yun, Young Hoon 대한토목학회 1993 대한토목학회논문집 Vol.13 No.4

도시지역내 쓰레기 매립지의 관리문제는 지방 자치단체와 도시 주민에게 있어 중요한 관심사로 대두되었다. 계속되는 쓰레기 매립지의 수용력 감소와 기존 쓰레기 매립지에 관련한 시민의 공중보건 및 환경 문제에 대한 자각은 쓰레기 매립지 선정과정에 있어서의 제약 요인으로 새롭게 제기되었다. 위치선정 과정상에는 그 밖에도 부가적인 제약 요인으로서의 사회적, 기술적 측면의 문제와 함께 계획과 보상비용 증가라는 문제가 복잡하게 얽혀있다. 적지선정에 과정에 지형공간정보시스템의 공간 데이터베이스 환경과 각종의 모델링 기능을 연결함으로써 대상지내의 쓰레기 매립 개발 적지 및 후보지선정을 빠른 시간내에 적은 비용으로 수행할 수 있을 것으로 판단된다. The management of wastes within the urban landscape has become a critical concern to both local governments and inhabitants. With landfill capacities steadily decreasing, rapid growth of economy, population and urbanization, citizen awareness of the environment and public health problems occured by existing landfill sites make difficulties in selecting the landfill site. Therefore, this study has been performed to select the optimum waste landfill site using GSIS methodology to reduce the time, cost and effort. As the result of this study, we can investigate many factors synthetically which could not be handled by the former method using hands in the site selection for waste landfill, and we can carry out economically the work of selecting suitable site throughout the vast area.

Y₂O₃-BN 복합체의 미세구조 및 내플라즈마 특성

이현규,이석신,김비룡,박태언,윤영훈,Lee, Hyun-Kyu,Lee, Seokshin,Kim, Bi-Ryong,Park, Tae-Eon,Yun, Young-Hoon 한국결정성장학회 2014 한국결정성장학회지 Vol.24 No.3

$Y_2O_3$-BN 세라믹 복합체를 제작하기 위해서, 분말 입도 $3{\sim}10{\mu}m$인 $Y_2O_3$ 분말을 분산한 슬러리에 pH 조절제인 NaOH를 첨가하였으며 결합제로는 PVA, 가소제로는 PEG를, BN 분말과 혼합하고, 분무건조(spray drying)공정을 거쳐 $Y_2O_3$ 혼합 분말을 제조하였다. ${\O}14mm$ 크기의 $Y_2O_3$-BN 시편을 성형하고, $1550^{\circ}C$ 및 $1600^{\circ}C$에서 소결하여 $Y_2O_3$-BN 복합체를 제작하였다. BN 투입량과 소결온도의 변수에 따른 미세구조, 순도, 꺽임강도, 열팽창계수, 밀도, 체적저항, 내플라즈마 특성을 조사하였다. $Y_2O_3$-BN ceramic composites were fabricated from the slurries of yttria powder with average particle size of 3~10 ${\mu}m$. The slurry was fabricated by mixing PVA binder, NaOH for Ph control, PEG, BN powder and $Y_2O_3$ powder. The mixed $Y_2O_3$ powders were obtained by spray drying process from the slurry. The $Y_2O_3$-BN composite specimen was shaped in size of ${\O}14mm$ and then sintered at $1550^{\circ}C$ and $1600^{\circ}C$, respectively. The characteristics, microstructure, purities, densities, bulk resistance, thermal expansion, hardness and plasma resistance of the $Y_2O_3$-BN composites were investigated with the function of BN contents and sintering temperature.

왕겨로부터 합성된 탄화규소 분말

박태언,황준연,임진성,윤영훈,Park, Tae-Eon,Hwang, Jun Yeon,Lim, Jin Seong,Yun, Young-Hoon 한국결정성장학회 2016 한국결정성장학회지 Vol.26 No.5

본 연구에서는, 실리카 분말과 왕겨의 혼합체로부터 탄화된 물질로부터, 탄화규소 (SiC) 분말이 합성되었다. 탄화왕겨와 실리카의 열탄화환원 반응을 통해 얻어진, SiC 시료는 XRD 회절 패턴, FE-SEM 및 FE-TEM을 통해 분석되었다. 시료들은 XRD 패턴에서, $35^{\circ}$ 부근의 (111) peak는 매우 높은 intensity를 나타내었고, $60^{\circ}$, $72^{\circ}$ 부근의 (220), (311) peak 등 탄화규소 결정상에 대한 peak pattern이 명확하게 관찰되었다. Ar 분위기에서 탄화왕겨와 실리카의 혼합비율이 6 : 4인 혼합물로부터 합성된 시료는 XRD 패턴에서 잔류카본이 검출되지 않았으며, hexagonal 결정상의 비율이 비교적 낮고, cubic SiC 결정상이 주도적으로 나타내었다. 탄화왕겨와 실리카의 혼합비율이 6 : 4인 경우에 합성된 시료는 $5{\mu}m$ 이하의 미세한 입자들이 관찰되었으며, TEM 분석결과에서, SiC 결정질상의 (110) 회절패턴 형태를 나타내었다. In this work, the SiC powders were synthesized through the carbonized matter from the mixture of silica powder and rice husks. The SiC powders, obtained from the carbothermal reduction reaction of silica and carbonized rice husks, were investigated by XRD patterns, XPS, FE-SEM and FE-TEM. In the XRD patterns, the specimens showed clearly very high strong peak of (111) plane near $35^{\circ}$ as well as weak (220) and (311) peak respectively at approximately $60^{\circ}$ and $72^{\circ}$. Under Ar atmosphere, the power synthesized from the mixture (in case of mixing ratio, 6 : 4) of carbonized rice husks and silica showed mainly cubic SiC crystalline phase showing relatively lower ratio of hexagonal phase without residual carbon in XRD pattern. In the TEM analysis, the specimen, synthesized from carbonized rice husks and silica with mixing ratio of 6 : 4 under Ar atmosphere, showed relatively fine particles under $5{\mu}m$ and a crystalline SiC phase of (100) diffraction pattern.