http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
LC-MS/MS를 이용한 생약 백출 및 우슬 중 Metalaxyl 잔류분석법 개발
윤명섭,양승현,최훈 한국응용생명화학회 2022 Journal of Applied Biological Chemistry (J. Appl. Vol.65 No.1
A new rapid and simple method for metalaxyl in Atractylodes macrocephala Koidzumi and Achyranthes japonica Nakai has been developed and validated. This study was conducted to develop a method for analyzing metalaxyl by a method based on QuEChERS using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Samples were extracted with acetonitrile and purified using amino-propyl (NH2) Solid Phase Extraction cartridge. The method limit of quantitation (MLOQ) was 0.01 mg/kg. The linearity of matrixmatched calibration curve (r2) was ≥0.99 at the calibration range of 0.001-0.05 mg/kg. For recovery test, Atractylodes macrocephala Koidzumi or Achyranthes japonica Nakai was treated with standard solutions at MLOQ and 10MLOQ levels. Recovery rates were in the range of 88.1-109.1% with <5.5% coefficient of variation. This established analytical method was fully validated. Based on these results, it can contribute to improving the safety of residual pesticides in Atractylodes macrocephala Koidzumi and Achyranthes japonica Nakai.
토양 내 잔류된 살균제 Fluopyram의 후작물 실파로의 흡수이행 연구
윤명섭,양승현,강동현,오경석,최훈 한국농약과학회 2021 한국농약과학회 학술발표대회 논문집 Vol.2021 No.11
우리나라는 기준 미설정 농약에 대해 불검출 수준의 일률기준으로 관리함으로써 농산물 중 잔류농약의 안전관리를 강화하고 국민에게 건강한 먹거리를 제공하기 위하여 농약허용물질목록관리제도(Positive List System)를 도입하여 시행하고 있다. PLS를 시행함에 따라 전 작물에 사용한 농약이 다음 작물인 후작물에 흡수 이행되어 일률기준 0.01mg/kg을 초과하는 문제점이 대두되고 있다. 따라서 비의도적인 농약오염 예방을 위해서 후작물 잔류허용기준설정이 필요한 실정이다. 본 연구에서 사용한 fluopyram은 pyridinyl-ethyl-benzamide계 살균제이며 숙신산탈수효소를 억제하여 흰가루병, 쟃빛 곰팡이병 방제에 사용된다. 시험작물은 엽경채류의 대표작물 중 하나인 파를 선정하였다. 토양과 실파의 잔류량 확인을 위해 전주와 대구 두 포장으로 시험을 수행하였다. 정식 60일, 정식 30일 전에 각각에 농산물 재배 중 fluopyram 40% 액상수화제를 최대 사용량(1.8g a.i./30m²)으로 토양 전면에 처리한 후 정식하였다. 토양은 약제살포 후 78일, 108일에 걸쳐 채취하였고, 실파는 정식 이후 55일 동안 재배하여 채취하였다. 잔류농약 분석은 LC-MS/MS를 이용하였고 분석법 정량한계는 0.01mg/kg이었으며, 회수율과 저장안 정성 시험은 70~120%를 만족하였다. 완숙기 토양의 농도는 최저 0.31mg/kg, 최대 0.84mg/kg이었으며, 실파의 잔류량은 완숙기에서 최저 0.09mg/kg, 최대 0.22mg/kg을 보였다. 실파 중 fluopyram 잔류량이 완숙기에서 현행 엽경채류 0.04<SUP>T</SUP>mg/kg보다 높은 잔류량을 보였다. 이러한 연구결과를 바탕으로 본 연구는 fluopyram의 후작물 잔류허용기준 설정 자료 및 안전성 평가를 위한 기초자료로 활용될 것으로 기대된다.
자동시험체계 TPS 이식에 관한 연구 - 항공기 Wire Harness TPS를 중심으로
윤명섭,박구락,고창배,정영석 한국융합학회 2018 한국융합학회논문지 Vol.9 No.10
본 논문은 항공전자 부분품의 기능시험을 위해 사용하는 전용 자동시험체계(ATS)를 범용 자동시험체계로 TPS를 이식하는 연구이다. 항공전자 부분품의 성능시험을 위해 사용하는 전용 자동시험체계는 적게는 수천만원에서 많게는 수백 억원에 이르는 고단가로, 항공전자 정비 사업을 영위하는 국내 기업에서는 초기 투자비용에 많은 어려움이 있어 사업 확장 의 장애 요인이 되고 있다. 이러한 이유로, 본 논문에서는 전용 자동시험체계를 사용하는 정비대상품인 A항공기에 사용되는 발전기 내의 Wire-Harness를 범용 자동시험체계로 사용하도록 TPS를 이식하는 절차에 대해 연구하였다. 제안한 연구를 통해 전용에서 범용으로 TPS 이식 후 평가 및 검증을 수행한 결과 100% 성능검증을 확인하였으며, 이것은 절차의 표준화를 거쳐 무한한 확장 가능성이 있어 적은 투자로 항공전자 MRO사업의 확장을 원하는 국내 기업들에 큰 도움을 줄 수 있을 것이다. This paper is a study of TPS Migration to a multi-purpose ATS which is used for functional testing of Avionics parts. The dedicated ATS used for the performance test of avionics parts has a lot of difficulties in domestic MRO companies that carry out maintenance of high-level avionics ranging from tens of thousands won to several hundreds of billions won. For this reason, in this paper, I have studied the procedure of TPS migration to use the wire-harness in generators used in A aircraft, which is a maintenance product using a dedicated ATS, as a general-purpose ATS. Through the proposed study, We confirmed the 100% performance verification after the TPS migration from the proprietary to the general purpose. It is possible to expand infinitely through the standardization of the procedure.
윤명섭(Myung-Sup Yoon),이동혁(Dong-Hyuk Yi),윤원식(Won-Sik Yoon),서명교(Myung-Kyo Seo),유승엽(Seung-Yup Ryu) 대한기계학회 2022 대한기계학회 춘추학술대회 Vol.2022 No.11
Supervised machine learning technique was applied to accurately predict the performance of the clean room air conditioner (CRAC) installed in the field. The performance of two neural networks was compared. One is the control group neural network using the laboratory sensor data and the other is the experimental group neural network using the product sensor data as an input. In both cases, they share laboratory performance results as an output label. Training data set of 2,816 combinations were acquired in the laboratory for the various indoor climate, outdoor climate and CRAC fan output conditions. When predicted with two trained ANNs, the control group showed better results thant the experimental group. In addition, the experimental group ANN performance prediction showed relatively more accurate results than the performance values calculated directly from the product sensors.
윤명섭(Myung Sup Yoon),박준상(Jun Sang Park),현재민(Jae Min Hyun) 한국유체기계학회 2006 유체기계 연구개발 발표회 논문집 Vol.- No.-
In this paper, the MHD flow of an incompressible, viscous and electrically conducting fluid above an infinite rotating axisymmetric wavy disk is analyzed by using transformed boundary layer equations. The fluid is subjected to an external uniform magnetic field parallel to the axis of the rotation. Generally, the flow fields in the r-z plane are weakened as the magnetic parameter becomes larger, thus the radial skin friction coefficient itself and the surface wave effect on it decrease. But the torque required to maintain steady rotation of the disk increases.
동심원 형상 홈이 파여진 원판이 회전하고 있을 때의 실린더 내부유동에 관한 연구
윤명섭(Myung Sup Yoon),박준상(Jun Sang Park),현재민(Jae Min Hyun) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.11
A numerical study is made of a flow in a cylinder with a rotating grooved endwall disk. The aim is<br/> to describe differences in the flow fields when there is concentrically-grooved obstacle characterized by<br/> amplitude(a) and wave number(N). The Reynolds number(Re) is varied from 103 to 104 and the aspect<br/> ratio(Ar) fixed to 1.0 for the most part of the simulation. For the various cases of amplitude(a) and<br/> wave number(N), numerical results are acquired. As the endwall groove roughness increases until<br/> certain limit, the interior azimuthal velocity component(v) increases drastically. But over the limit, the<br/> swirl motion chararcterized by velocity v decreases and finally it approaches much alike Ar=1.0-a case.<br/> The reason of activating swirl motion is based on increasing of torque transported by endwall disk.<br/> Torque coefficients(CT) are aquired for the various (a,N,Re) combinations and the limiting phenomena<br/> of swirl motion activation is explained.