RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 학술지명
        • 주제분류
        • 발행연도
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • 전계효과에서 정전위 형성을 이한 Insulator 제작과 두께 변화에 따른 저항특성

        한무재(Moo-Jae Han),신요한(Yo-Han Shin),윤량영(Ryang-yung Yoon),최근영(Gun-yung Choi),오경민(Kyung-Min Oh),남상희(Sang-Hee Nam) 한국방사선학회 2015 한국방사선학회 학술대회 논문집 Vol.2015 No.추계

        현재 X-ray 검출 시스템에서 Integration 방식의 성능 개선 연구방향은 국한되어지며, 이로 인해 개선치의 한계를 나타내고 있다. 또한 물질 특성의 한계로 인해 더욱 미세한 선량을 검출하기 어려운 실정이다. 이와 달리 전계효과를 나타내 는 검출 기술은 디락-점이라는 높은 저항 peak를 활용함으로써 미세 선량 검출이 가능하다. 이를 활용하기 위한 전계 형 성은 절연물질을 통한 정전위 형성층이 필수적으로 요구되며, 절연물질의 두께에 따라 달라 질 수 있는 절연 특성에 대한 연구가 필요한 실정이다. 이에 본 연구에서는 PIB 증착 방식을 이용한 정전위 형성층 제작과 그에 따른 절연 효과 및 특성에 대한 분석을 통하여 활용 가능성을 검증하였다. 절연물질로 Si based oxide를 활용하여 다양한 절연두께를 제작하였으며, 인가전압에 따라 측정되는 drift current를 저항으로 산출하여 절연 두께에 따른 저항의 특성을 분석하였다. 그 결과, 2 V와 3 V의 인가전압을 걸어주었을 때, 최대치의 저항 값을 나타내었으며, 이러한 최대 점은 절연물질의 두께가 증가할수록 3 V에서 2 V로 최대치를 나타내는 peak가 shift되는 현상이 나타났다. 이러한 결과를 토대로 PIB방식을 이용한 절연 물질층 제작은 전계효과 검출시스템의 차세대 검출기 연구에 대한 활용 가능성을 입증하였다. For the current X-ray detection system, researches into an integration system for improving performance is limited, indicating a limit to improvement. Furthermore, the limit of material properties makes it difficult to detect finer dose. Alternatively, the detection technology indicating filed effect uses resistance peak referred to as Dirac point, enabling it to detect minute-dose. To form an electric field to utilize this, it is critical to form an electric potential layer through insulation materials and there is the need of conducting studies on the dielectric properties which may vary depending on the thickness of insulation materials. Thus, in this study, the author prepared constant-potential formation layer using PIB deposition and analyzed the applicability of it through analyzing its insulating effect and properties. Constant-potential formation layers of various thicknesses were prepared using Si-based oxide as insulation material and the drift current measured in accordance with the applied voltage was calculated into resistance so as to analyze the properties of resistance in accordance with insulation thicknesses. As a result, the applied voltage of 2V and 3V showed resistance peak and this resistance peak shifted from 3V to 2V with an increase in the thickness of insulation material. Through the preparation of insulation material layer using PIB method based on the above results, the author has proved the applicability of the findings of this study to the researches into next-generation field effect detection system.

      • 페를린을 이용한 후면 반사막 두께에 따른 광학 특성에 대한 연구

        김교태(Kyo-Tae Kim),신요한(Yo-Han Shin),윤량영(Ryang-Yung Yoon),박병규(Byeong-Gyu Park),허예지(Ye-Ji Heo),강상식(Sang-Sik Kang),박지군(Ji-Koon Park),남상희(Sang-Hee Nam) 한국방사선학회 2015 한국방사선학회 학술대회 논문집 Vol.2015 No.추계

        형광체 스크린 제작 시 보편적으로 이용되는 스크린 프린팅 방법은 상부 반사막의 불균일한 계면특성을 야기하여 산란반사의 문제점을 초래한다. 이에 본 연구에서는 유기성 투명 박막 소재인 페를린 기반의 하부 반사막에 대하여 연구하였다. 연구 결과, 광투과율과 광학적 특성은 Trade-off 관계에 있음을 증명하였고 광투과율을 90% 이하로 제작 시 산란기전을 통한 발광 효율 증가로 인하여 하부 반사막으로써의 역할을 수행할 수 있을 것으로 사료된다. 차후 최적화된 후면 반사막을 제작하기 위해서는 굴절률 제어에 대한 다각적인 연구가 필요할 것으로 사료되며, 본 연구의 결과는 다양한 문 제 해결을 위한 기초 자료로 활용할 수 있을 것으로 사료된다. The screen printing method which is generally used for fabrication of phosphor screens raises problem with diffuse reflectance because it causes lack of uniformity on upper reflection coating. Thus, this study was focused on the parylene, the organic transparent thin film, based lower reflection coating. According to the result, it was proved that the penetration ratio and light optical property are related with 'Trade-off relationship', and it is considered to be able to be used as lower reflection coating with the enhancement of luminance efficiency by scattering mechanism when fabricate with lower penetration ratio of light than 90%. it is considered that the variety researchs about refractive index control will be needful for the optimized reflective film on the back reflector. Also these results are consiedered to be able to the basic reference for diverse solution of problems.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼