http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
직류 서보 전동기 제어의 강인성을 위한 전문가 관리 제어
오훈,박왈서,Oh, Hun,Park, Wal-Seo 한국조명전기설비학회 1995 조명.전기설비 Vol.9 No.6
It is needed to robust control for D.C. servo motor according to industrial automation. However, when a motor has an effect of disturbance and variable load, it is very difficult to guarantee the robustness of the system. as a compensation way of solving this problem, in this paper, a expert supervisory control method for motor control system is presented. Expert supervisory controller is designed by error and error change, and nth control input is decided by the addition of (n-1)th control input and inference amount of increase or decrease. Control input of expert supervisory control is transmitted to input, and the disturbance effect decrease remarkable by control input. The robustness of D.C. servo motor using expert supervisory control is demonstrated by the computer simulation.
오훈,최석호,윤양웅,Oh, Hun,Choi, Seok-Ho,Yoon, Yang-Woong 한국조명전기설비학회 1998 조명·전기설비학회논문지 Vol.12 No.3
본 논문에서는 시스템의 동특성이 변화 가능한 구간에서 임의의 생플올 추출하여 신경회로망을 학습시킴으로써 시스템 동특성에 따라 Pill 제어기가 자동동조하는 방법을 제시하였다. 신경회로망을 학습시키기 위해 역전파 학습 알고리즘올 사용하였고, 교사치로는 규칙기반에 의해서 얻어진 매개변수를 이용하였다. 부하 변화시 시스템의 동특성에 맞는 Pill 제어기가 자동동조됨을 시뮬레이션에 의해 확인하였다. In this paper, the control technique that ID controller are autotuned according to system dynamics, driving out sample in the changeable limits of system dynamics and learning neural network, is presented. In order to lean neural network, the backpropagation learning algorithm is used and the controller parameters obtained by rule-base are used as teacher's values. When load changes, the auto-tuning of PID controller proper to system dynamics is conformed by simulation.
조가선 이상 장력 작용에 대한 전주의 영향 및 보호 대책 연구
오훈,Oh, Hun 한국조명전기설비학회 2006 조명·전기설비학회논문지 Vol.20 No.3
본 연구에서는 통신선 가설 보조 기구인 조가선에 이상 장력이 작용하였을 때 전주의 영향을 유한 요소 해석을 통하여 전주 보호 기구를 설계 해석하여 보호시스템을 개발하였다. 보호시스템은 일반하중 또는 풍압과 일반적인 불평형 하중에서는 조가선이 탈락되지 않고 일정강도 이상이 가해지면 조가선이 자동 탈락되어 전주의 절손 방지 역할을 한다. 이러한 보호시스템의 구조는 유한 요소 해석을 통하여 해석되어졌고, 실제 제품에 대한 인장강도를 측정함으로써 성능을 입증하였다. In this study, we analyzed the influence or electrical pole by FEM(Finite Element Method) and developed protective system by designing and interpreting protective system for electrical pole when abnormal strength worked on messenger wire. Protective system did not shed messenger wire under wind pressure and discontent load but did assign a part to preventing rupture of electrical pole through automatically shed messenger wire over fred strength. Structure of protective system analysis by FEM and prove property by measuring tensile strength for practical product.
오훈,윤양웅,Oh, Hun,Yoon, Yang-Woong 한국조명전기설비학회 1995 조명.전기설비 Vol.9 No.1
PDI 제어기는 많은 서보 제어 시스템에 사용되고 있다. 하지만 제어 시스템이 가변부하일 경우에 정밀한 제어는 어렵게 된다. 이에 대한 보완적인 한 방법으로, 본 논문에서는 가변부하일 경우 퍼지 규칙에 의해 PID 제어기의 매개변수를 자동 동조하는 방법을 제시하였다. PID 제어기의 매개변수는 부하 변화에 따라 퍼지 규칙에 의해 결정된다. 퍼지 자동 동조에 의한 정밀한 제어 기능은 모의실험에 의해 확인하였다. PID controller is being used in many servo control system. However, when a control system has variable load, it is difficult to guarantee the accurate control of the system. In the way of solving this problem, in this paper, a auto-tuning method of PID controller parameter using fuzzy rule in variable load is presented. The parameter of PID controller are decided by fuzzy rule according to load variation. The accurate control function of fuzzy auto-tuning is demonstrated by simulation.
저압 지중케이블 고장 위치 검출 실증 시험장 설계 및 구축
오훈(Oh, Hun) 한국산학기술학회 2015 한국산학기술학회논문지 Vol.16 No.10
전력 케이블의 고장에 대한 위치를 검출하기 위한 다양한 반사파 계측법들이 연구되고 있다. 하지만 대부분 관련 연구들이 시뮬레이션과 실험실에서의 성능 검증이 이루어지고 있고, 실제 현장과 비슷한 조건에서의 연구는 실증 시험장의 부재로 인해 이루어지지 못하고 있다. 따라서 본 논문에서는 케이블 고장 검출 장치의 표준화된 성능 시험과, 장비 운영 교육 을 위한 실증 시험장을 설계 및 구축하였다. 구축된 실증시험장에서는 100m, 200m 거리에서 단선, 합선, 반단선, 접촉 불량 고장을 발생시켰고 최대 거리 측정 시험을 위해 1km 케이블을 설치하였다. 이러한 실증시험장은 향후 케이블 고장 검출 기술 의 개발과 표준화, 그리고 장비 성능 검증 및 인증 시험 등을 위해 활용될 수 있을 것이다. Various reflectometry methods to locate power cable fault have been studied. But, most related studies has been verifying by simulation and laboratory test and study in conditions similar with real cable fault filed was not performed due to the absence of cable fault test field. Therefore, this paper design and construct test field for the standardized performance test and the operating education of cable fault location equipments. In the constructed test, open, short, half open and poor contact fault at 100m, 200m location of cable was produced and 1km cable role was installed for maximum distance measurement test. The test field will be used in the development and standardization of cable fault location technology, and te performance evaluation and certificate test of the related equipments.