Comparison of $[^{18}F]Fluoropropylating Agents for ^{18}F-Radiolabeling of Amines$

오승준,조연승,김상은,최용,이경한,김병태,O, Seung Jun,Jo, Yeon Seung,Kim, Sang Eun,Choe, Yong,Lee, Gyeong Han,Kim, Byeong Tae Korean Chemical Society 2000 Bulletin of the Korean Chemical Society Vol.21 No.11

건설업 사고 발생원인 파악을 위한 사고 분석 모델 개발

임원준 ( Won Jun Lim ),기정훈 ( Jung Hun Kee ),성주현 ( Joo Hyun Seong ),박종일 ( Jong Yil Park ) 한국안전학회(구 한국산업안전학회) 2019 한국안전학회지 Vol.34 No.1

Accident analysis models were developed to improve the construction site safety and case studies was conducted. In 2016, 86% of fatality accidents occurred due to simple unsafe acts. Structure related accidents are less frequent than the non structure related causes, but the number of casualties per accident is two times higher than non structure one. In the view of risk perception, efforts should be given to reduce accidents caused by low frequency - high consequence structure related causes. In case of structure related accident, structural safety inspection and management (including quality), ground condition management / inspection technology, and provision of risk information delivery system in case of non structure related accident were proposed as a solution. In analysis of relationship between safety related stakeholder, the main problem were the lack of knowledge of controller and player, loss of control due to duplicated controls, lack of communication system of risk information, and relative position error of controller and player.

Special Report - MPEG 표준화 현황

오승준,O, Seung-Jun 한국정보통신기술협회 2016 TTA저널 Vol.168 No.-

카라기난 기반 액상형 바이오 종이 접착제의 제조 및 물성에 관한 연구

오승준,한원식,위광철,Oh, Seung-Jun,Han, Won-Sik,Wi, Koang-Chul 한국문화재보존과학회 2020 보존과학회지 Vol.36 No.6

휘발성 유기 화합물 기반의 접착제를 대체하고자 천연 재료에 대한 수요가 늘고 있지만, 제조 및 생산의 전 과정에서 휘발성 유기화합물 사용을 일절 배제할 경우, 제조의 곤란, 생산성 및 보존성의 저하 등의 단점이 나타났다. 본 연구에서는 해조류의 카라기난 성분을 이용해 천연바이오 접착제를 제조하고 종이 접착제로서의 가능성을 확인해보고자 하였다. 카라기난을 이용한 액상형 바이오 종이 접착제의 제조에서 carrageenan의 겔화는 접착제의 제조과정, 발림성, 균일성, 접착 강도의 문제를 나타내게 된다. 이를 위하여 추출된 전체 carrageenan 중에서 λ-carrageenan만을 분리하여 사용하였으며 이로 인하여 매우 안정된 종이 접착제의 제조가 가능하였다. 최종 조성은 λ-carrageenan 52.0 ± 1.0%, polyvinylpyrrolidone 30.5 ± 0.5%, ethylhexylglycerin 1.0 ± 0.05%, glycerin 1.5 ± 0.05%, dextrine 13.5 ± 0.5%, 식품용 소포제 FD330A 0.6 ± 0.05%의 조성이었다. 이들이 나타내는 점도는 1.13 ± 0.07 × 10⁵ cPs (25℃), pH 6.22, 건조속도 15 min, △b^* -10.79, △E^*ab 8.18의 자외선 열화 결과를 나타내고 있었으며 44.63 kgf/cm²의 매우 우수한 접착 강도를 나타내고 있었다. 이 접착제는 TVOC, HCHO 및 중금속 모두에서 불검출 결과를 나타내었으며 총호기성생균수 측정과 ASTM G 21-15 시험법에 의하여 곰팡이 challenge test에서도 곰팡이에 대한 우수한 저항성 결과를 나타내고 있어서 접착제의 항속성에서도 우수한 결과를 나타내고 있는 것으로 보인다. There is a growing demand for natural materials to replace adhesives based on volatile organic compounds (VOCs). However, the exclusion of VOCs from the manufacturing process leads to difficulties in manufacturing, and reduction in productivity and preservability. In this paper, we report the manufacture of natural bioadhesives using the carrageenan component of seaweed. λ-carrageenan, isolated from the extracted total carrageenan, was used to prepare a highly stable adhesive for paper. The resulting composition was 52.0 ± 1.0% λ-carrageenan, 30.5 ± 0.5% Polyvinylpyrrolidone, 1.0 ± 0.05% ethylhexylglycerin, 1.5 ± 0.05% glycerin, 13.5 ± 0.5% dextrine, and 0.6 ± 0.05% food-grade antifoam emulsion. The viscosity was found to be 1.13 ± 0.07 × 105 cP (25℃), UV degradation occurred at pH6.22, drying rate was 15min, △b^* was -10.79, and △E^* ab was 8.18. The bioadhesive showed an excellent adhesion strength of 44.63 kgf/cm². Thus this adhesive showed excellent fungal resistance and good adhesive persistence, without the presence of total volatile organic compounds (TVOC), formaldehyde (HCHO), and heavy metals.

시뮬레이션 훈련이 뇌졸중 환자의 균형 능력에 미치는 영향

오승준,안명환,Oh, Seung Jun,Ahn, Myung Hwan 대한물리치료과학회 2013 대한물리치료과학회지 Vol.20 No.1

Purpose : Investigate the effects of Horse-back riding Simulation Machine training on the Balance ability in Patients with Stroke. Method : The patients were divided to control group(n=18) with conventional rehabilitation conventional rehabilitation 60min/day and experimental group(n=17) with hippotherapy simulator 15 min/day after conventional rehabilitation 45min/day, 5 time/week for 4 weeks. Balance ability of both groups was assessed using Timed Up and Go(TUG), Berg balabce scale(BBS) and Center of pressure area(COPA). In the present result, there was a no significant(P>0.05) Results : The results of this study showed that Horse-back riding Simulation Machine training, after training, had meaningful difference of TUG, BBS and COPA. Conclusion : This study showed that Horse-back riding Simulation Machine training increased balance ability that resulted in enhancement of motor performance.

Parallel Computing For Computational Geometry

오승준,O, Seung-Jun Electronics and Telecommunications Research Instit 1989 전자통신동향분석 Vol.4 No.1

Computational Geometry is concerned with the design and analysis of computational algorithms which solve geometry problems. Geometry problems have a large number of applications areas such as pattern recognition, image processing, computer graphics, VLSI design and statistics since they involve inherently geometric problems for which efficient algorithms have to be developed. Several parallel algorithms, based on various parallel computation models, have been proposed for solving geometric problems. We review the current status of the parallel algorithms in computational geometry.

가역성이 우수한 도자기 복원용 Urethane resin의 개발 및 물성에 대한 연구

오승준,박기정,위광철,Oh, Seung Jun,Park, Gi Jung,Wi, Koang Chul 한국문화재보존과학회 2015 보존과학회지 Vol.31 No.1

현재 토기 및 도자기를 보존처리 할 때 사용되고 있는 접착 복원제의 경우 크게 Epoxy계, Cellulose계, Cyanoacrylate계 등이 사용되고 있으나 재료에 따라 심한 수축으로 인한 재탈락, 황변 현상으로 인한 색상 변화, 사용시 도구와 손에 묻어나오는 불편한 작업성, 비가역성 등 다양한 문제점을 나타내고 있다. 본 연구에서는 도자기 복원용으로 사용되고 있는 Epoxy resin의 황변 현상과 비가역성의 문제점 해결을 목적으로 저황변, 가역성이 우수한 Urethane계 합성수지를 개발하였다. 개발된 Urethane resin의 접착력은 원액 2.07MPa로 기존 재료인 $EPO-TEK301^{(R)}$ 1.21MPa로 1.5배 이상의 우수한 물성을 지니고 있다. 가공성 측정 결과 Urethane resin(in Talc 50wt%)의 마모율이 1.09%로 기존 재료인 Quick $Wood^{(R)}$(1.02%)의 마모율 보다는 다소 높게 측정되었으며, EPO-$TEK301^{(R)}$(0.41%)와 $L30^{(R)}$ (0.39%)보다 는 2배 이상의 마모율을 보이고 있어 기존의 재료보다 쉽게 성형 과정이 이루어질 수 있는 장점을 지니고 있다. Urethane resin의 장점인 가역성 실험은 Acetone, Ethyl Alcohol 침적 후 12시간 경과 후 Urethane resin과 충전제인 Talc가 분말화 현상을 나타내며 100% 용해되었으며, 기존 Epoxy resin의 가역성이 0%인 것에 비해 매우 우수한 가역성을 지니고 있다. 내구성 평가를 위한 자외선 실험 결과 Urethane resin의 원액 기준 ${\Delta}E^*ab$ 색상 변화 값이 자외선 노출 전 후 2.76로 기존의 Epoxy resin보다 약 7~20배 정도 줄어 황변 현상으로 인한 이질감의 문제점을 최소화하였다. In the case of adhesives & restoration agents currently being used for the preservation treatment of ceramics and earthenware, epoxy type, cellulose type and cellulose type are mainly being used. However, they are showing various problems such as re-detachment from severe contraction, color change from yellowing, work inconvenience of staining on tools and hand during usage and irreversibility. For the purpose of solving the issues of yellowing and irreversibility of epoxy resin being used to restore ceramics, urethane synthetic resin with low yellowing excellent reversibility has been developed in this study. The adhesive strength of urethane resin that has been developed has excellent properties with 2.07MPa for undiluted solution, which is 1.5 times higher than that of existing material EPO-$TEK301^{(R)}$ 1.21MPa. The result of workability measurement showed that the wear rate of urethane resin (in Talc 50wt%) was 1.09%, which was somewhat higher than that of existing material Quick $Wood^{(R)}$ (1.02%). In addition, its wear rate is two times higher than that of $EPO-TEK301^{(R)}$ (0.41%) and $L30^{(R)}$ (0.39%), thereby showing an advantage in its forming process compared to existing materials. As for the advantage of urethane resin of reversibility experiment, 12 hours after acetone, ethyl alcohol deposition, urethane resin and filler talc were dissolved 100% while showing powdering phenomenon. Compared to 0% reversibility of existing epoxy resin, it has much superior reversibility. The result of UV rays experiment to evaluate its durability showed that ${\Delta}E^*ab$ color change value based on undiluted solution of urethane resin was 2.76 before & after UV rays exposure, which was a decrease by about 7-20 times compared to that of existing resin, thereby minimizing the issue of heterogeneity.

네트워크 컴퓨터 기술개발 동향

오승준,정광수,차호정,O, Seung-Jun,Jeong, Gwang-Su,Cha, Ho-Jeong 대한전자공학회 1998 전자공학회지 Vol.25 No.3

네트워크 기반의 가상 컴퓨팅 환경은 사용자에게 네트워크에 접속되어 있는 다양한 컴퓨팅 자원 및 서비스들을 하나의 가상적인 컴퓨팅 환경으로 제공하는 개념으로서, 초고속통신망 기술, 분산처리 기술, 에이젼트 기술 등 다양한 관련 기술들이 접목되어야 가능하게 된다. 이를 실현시키고 있는 시스템이 최근 부각되는 네트워크 컴퓨터이다. 본고에서는 네트워크 컴퓨터 특히 멀티미디어 기술과 네트워크 컴퓨팅 기술을 병합한 형태의 멀티미디어 가상 네트워크 컴퓨터(MVNC) 개발 배경과 기술 동향 그리고 핵심기술을 소개한다.

건축 협력설계 의사결정 지원모델의 적용에 관한 연구

오승준(Oh Seung-Jun),전재열(Chun Jae-Youl) 대한건축학회 2004 大韓建築學會論文集 : 構造系 Vol.20 No.8

The communication among the design participant who architecture, structure, HVAC, electric engineer have not been smooth<br/> in design process of architectural project in Korea.<br/> Therefore designs have not been suitable for performance requirement, cost and constructability. The reason why these<br/> problems happened that the result of design is not corresponding to design change is caused by variable factor from design till<br/> construction phase; therefore the problem (low quality etc.) has been happened because of disagreement between<br/> Multi-disciplinary drawings.<br/> For the purpose of this research, is to propose the establishment method of decision support model for the cooperative design<br/> in order to provides improved design coordination and optimize the building system. and vivificated the applicability of<br/> proposed decision support model through case study.

거울신경 세포시스템을 이용한 동작관찰훈련이 뇌졸중 환자의 인지기능과 일상생활에 미치는 영향

오승준(Seung Jun Oh),황재호(Jae Ho Hwang),김용훈(Yong Hoon Kim) 한국인지운동치료협회 2021 한국신경인지재활치료학회지 Vol.13 No.2

The purpose of this study was to investigate the effect of motion observation training with mirror neurons on cognitive function and daily life. A total of 20 stroke patients were recruited from Chungdam Hospital. Each patient was assigned to an experimental or a control group. The experimental group received both motion observation training and general rehabilitation treatment, whereas the control group received general rehabilitation treatment. The intervention time was 30-min assessment in five sessions weekly for 8 weeks. To examine the changes before and after treatment, outcomes were assessed using the Mini-Mental State Examination Modified-K (MMSE-K), K-Barthel Index (K-MBI), and Fugl-Meyer Assessment (FMA). After 8 weeks of intervention, the MMSE-K (p=0.040), K-MBI (p=0.032), and FMA (p=0.016) scores significantly improved in the motion observation training group compared with those in the control group. As a result, motion observation instruction using mirror neurons was more helpful in recovering cognitive function and activities of daily life than general rehabilitation treatment after stroke.