http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
내부확산법으로 제조된 $Nb_3Sn$ 초전도 선재의 임계전류 및 n-값의 자장, 변이 의존성
오상준,최희경,이철희,김기만,Oh, Sang-Jun,Choi, Hee-Kyung,Lee, Chul-Hee,Kim, Kee-Man 한국초전도학회 2008 Progress in superconductivity Vol.9 No.2
Detailed field and strain dependence of the critical current and the n-value for an internal-tin processed $Nb_3Sn$ strand have been measured. Both the compressive and tensile strain is applied reversibly using Walter spiral probe made of BeCu up to 0.73 %. There is a correlation between the critical current and the n-value for the $Nb_3Sn$ strand studied in this work and the field dependence of the n-value is in agreement with a recent empirical formula. It was further shown that the critical current can be reasonably well fitted by the scaling law based on strong-coupling theory of superconductivity using the relation between the critical current and the n-value.
오상준,서상욱,Oh Sang-Jun,Suh Sang-Wook 한국건설관리학회 2001 건설관리 : 한국건설관리학회 학회지 Vol.2 No.4
건설산업은 타산업에 비해 불확실성이 크게 존재하고, 작업간에 상호 의존성이 강한 산업으로, 불확실성에 의해 발생되는 변이는 건설산업의 생산성 감소를 가져온다. 불확실성에 의한 변이의 대처방안으로 변이관리 및 연구의 필요성이 절실히 요구되고 있으나, 아직까지 국내에선 연구가 미흡한 실정이다. 본 연구의 목적은 건설산업에서 변이의 원인 빛 유형을 분석하고 그에 대한 대안으로 변이관리 기구 및 기법을 정립에 있다. 변이관리를 위한 방법으로, 우선 국내 건설현장에서의 변이관리 실태를 조사하였으며, 이를 토대로 변이관리 모델을 제안하였다. 변이관리 모델은 변이관리 기구를 통한 첫 번째 접근과 변이관리 기법을 통한 두 번째 접근 방식으로 제안하였고, 변이발생 시기에 따른 접근으로 변이의 발생 전과 발생 시, 발생 후로 변이관리의 상태를 분류하였다. 또한 변이관리에 적용되는 변이관리 기법으로 쉴딩(shielding)과 디커플링(decoupling) 두 가지를 사용하였다. 변이관리 기구 빛 기법의 적용은 국내 건설산업에서 생산성과 신뢰도(reliability)향상을 증대시키는 중요한 요소이며, 변이관리 모델을 이용한 변이관리는 국내 건설산업의 새로운 방향을 제안한다. The purpose of this study is to present a way of Variation Control in building construction process. The study suggest a way of the application method of shielding, decoupling concept and also Poka-yoke device to control variation that occurs from uncertainty in construction industry with lots of waste factors. The main contents of the study are as follows; (1) It's suggested strategy to apply shielding, decoupling as variation control technique. (2) Current Poka-yoke devices are investigated and analyzed. As a future research, it is required to study continuously on the more effective application method of Poka-yoke device and on existing examples in domestic construction sites for the process improvement.
마스킹 기법을 적용한 SEED 하드웨어 암호 모듈 구현
오상준 ( Sang-jun Oh ),김동규 ( Dong-kyue Kim ) 한국정보처리학회 2013 한국정보처리학회 학술대회논문집 Vol.20 No.2
IC 카드 및 USIM 등의 보안 하드웨어 토큰은 기존의 보안 소프트웨어에 비해 독립적인 하드웨어 연산을 사용하기 때문에 안전하다고 인식된다. 그러나 하드웨어의 연산시 발생하는 부채널 정보(전력, 전자파 등)를 이용하는 부채널 공격에 취약할 수 있다. 본 논문에서는 부채널 공격 방법 중 널리 사용되고 있는 전력분석공격에 대한 대응 기법을 적용 시킨 SEED 하드웨어 모듈을 구현 하고, 공격에 효과적으로 대응이 가능한지 시뮬레이션을 통해 검증 한다.
탄소 및 탄소화합물이 도핑된 $MgB_2$ 초전도체의 볼밀링 효과
안중호,장민규,오상준,Ahn, Jung-Ho,Jang, Min-Kyu,Oh, Sang-Jun 한국초전도학회 2008 Progress in superconductivity Vol.10 No.1
We have examined the effect of ball-milling on the superconducting properties of $MgB_2$ doped with C. The ball-milling of pre-reacted $MgB_2$ powder was carried out in dry or wet state using C or diethylenetriamine ($C_{4}H_{13}N_3$) as additives. The diethylenetriamine, whose chemical formula contains no oxygen, was chosen to avoid an excess oxidation during doping. The superconducting transition temperature (Tc) of the ball-milled or doped $MgB_2$ powders was only slightly smaller than that of undoped $MgB_2$. The critical current density (Jc) of the highly ball-milled $MgB_2$ was higher than that of C-doped $MgB_2$. The addition of diethylenetriamine was detrimental to Jc, although Tc was almost unchanged.
Effect of $Y_2O_3$ Nanoparticles on Critical Current Density of $YBa_2Cu_3O_{7-x}$ Thin Films
위창환,강병원,오상준,이성익,Tran, H.D.,Reddy, D.Sreekantha,Wie, C.H.,Kang, B.,Oh, Sang-Jun,Lee, Sung-Ik 한국초전도학회 2009 Progress in superconductivity Vol.11 No.1
Introduction of proper impurity into $YBa_2Cu_3O_{7-x}$ (YBCO) thin films is an effective way to enhance its flux-pinning properties. We investigate effect of $Y_2O_3$ nanoparticles on the critical current density $J_c$ of the YBCO thin films. The $Y_2O_3$ nanoparticles were created perpendicular to the film surface (parallel with the c-axis) either between YBCO and substrate or on top of YBCO, YBCO/$Y_2O_3$/LAO or $Y_2O_3$/YBCO/STO, by pulsed laser deposition. The deposition temperature of the YBCO films were varied ($780^{\circ}C$ and $800^{\circ}C$) to modify surface morphology of the YBCO films. Surface morphology characterization revealed that the lower deposition temperature of $780^{\circ}C$ created nano-sized holes on the YBCO film surface which may behave as intrinsic pinning centers, while the higher deposition temperature produced much denser and smoother surface. $J_c$ values of the YBCO films with $Y_2O_3$ particles were either remained nearly the same or decreased for the samples in which YBCO is grown at $780^{\circ}C$. On the other hand, $J_c$ values were enhanced for the samples in which YBCO is grown at higher temperature of $800^{\circ}C$. The difference in the effect of $Y_2O_3$ can be explained by the fact that the higher deposition temperature of $800^{\circ}C$ reduces intrinsic pinning centers and $J_c$ is enhanced by introduction of artificial pinning centers in the form of $Y_2O_3$ nanoparticles.
접시형 태양열 집광 시스템을 이용한 열화학 사이클의 수소생산
권해성(Kwon, Hae Sung),오상준(Oh, Sang Jun),서태범(Seo, Tae Beom) 한국태양에너지학회 2011 한국태양에너지학회 학술대회논문집 Vol.2011 No.11
Thetwo-step water splitting thermochemi calcycleis composed of theT-R (ThermalReduction)and W-D (Water Decomposition)steps.The mechanism of this cycle is oxidation-reduction, which produces hydrogen. The reaction temperature necessary for this thermochemical cycle can be achieved by a dish-type solar thermal collector (Inha University, Korea). The purpose of this study is to validate a water splitting device in the field. The device is studied and fabricated by Kodama et al (2010,2011).The validation results show that the foam device, when loaded with NiFe2O4/m-ZrO2powder, was successfully achieved hydrogen production with 9(10 with a Xe-light solar simulator, 2009, Kodama et al.) repeated cycles under field conditions. Two foam device used in this study were tested for validation before an experiment was performed. The lab scale ferrite-conversion rate was in the range of 24~76%. Two foam devices were designed to for structural stability in this study. In the results of theexperiments, the hydrogen percentage of the weight of each foam devicewas 7.194 and 9.954μmol g<SUP>-1</SUP> onaverage, and the conversion rates 4.49~29.97 and 2.55~58.83%, respectively.
고온 태양열을 이용한 2단계 열화학 사이클의 수소생산(Ⅱ)
동재용(Jae Yong Dong),김태준(Tae Jun Kim),정영국(Young Guk Jung),오상준(Sang Jun Oh),이주한(Ju Han Lee),서태범(Tae Beom Seo) 대한기계학회 2010 대한기계학회 춘추학술대회 Vol.2010 No.5
본 연구에서는 집광된 태양복사에너지를 열원으로 사용히고 NiFe₂O₄/m-ZrO₂를 입힌 다공성 물질을 물 분해 장치로 사용한 수소생산시스템의 실험을 수행하였다. 집광장치로 5㎾<SUB>th</SUB> 급의 접시형집광장치(인하대학교, 인천, 송도)를 사용하였으며 반응에 필요한 온도(1100℃~1600℃)를 견디기 위한 반응기 설계를 수행하였다. 실험을 통해 인공광원을 이용하여 성능이 평가된 촉매가 담지된 다공성 물질에 대한 실제 일사조건에서의 수소생산성능을 평가하고자 하였다. 실험결과 5회의 연속적인 물 분해 수소생산 사이클을 유지하였으며 수소생산량 및 페라이트의 전환율에 대한 분석을 수행하였다. This study present the results of experiment of hydrogen production with the thermochemical two-step water splitting cycle using solar heat. Chemical reactor was designed to be used for operating with dish type solar thermal system. Scaled-up device, performance verified on hydrogen production in laboratory scale experiment, was tested by dish type solar thermal system in field. The optimum temperature of reactions was examined by solar thermal simulator and this temperature was used as a reference value during the system operation in field. The foam device NiFe₂O₄/m-ZrO₂ powder was successful with respect to hydrogen production through 5 repeated cycles.
α-Al₂O₃가 코팅된 폴리프로필렌 분리막에서 무기물 입자 크기에 따른 물성 변화 및 전기화학적 특성
심형석(Hyeong-seok Shim),신혜주(Hyu-ju Shin),오상준(Sang-jun Oh),최신호(Sinho Choi),김태희(Tae-Hee Kim) 한국전지학회 2021 한국전지학회지 Vol.1 No.2
본 연구에서는 리튬 이온 이차전지의 핵심 소재인 분리막에 다양한 입자 사이즈(150 nm, 200 nm, 300 nm)의 Commercial Al₂O₃(CM- Al₂O₃)를 사용해서 세라믹 코팅 분리막을 제작하였다. 제조된 코팅분리막의 물성을 평가하고, 이를 코인 하프셀에 적용하여 전기화학적 특성 변화를 관찰하였다. In this study, ceramic-coated separators were fabricated using α-Al₂O₃ of various particle sizes (150 nm, 200 nm, 300 nm). The physical properties of ceramic-coated separators were analyzed, and a coin half-cell including the ceramic-coated separator was assembled to observe electrochemical properties.