http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
기관적용 저압용 vortex tube의 에너지 분리특성에 관한 실험적 연구
오동진(Dongjin Oh),임석연(Sugyeon Lim),윤면근(Myeonkeun Yoon),류정인(Jeongin Ryu) 한국자동차공학회 2002 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2002 No.5_1
The process of energy separation in a low pressure vortex tube with air as a working medium is studied in detail. Experimental data of the temperature of the cold and hot air leaving the vortex tube are presented. The variation of the maximum wall temperature along the inner surface of the vortex tube and the temperature distribution in a vortex tube provides useful information about the location of the stagnation point of the flow field at the axis of the vortex tube.<br/> In this study Outer tube is used for the application of Diesel engine exhaust. The hot gas flow is turned 180° and passes the outside of the vortex tube a second time heating it. From this geomatric setup of a vortex tube the effects of energy separation and the prediction of the ignition of Diesel Soot is presented by experimental data.
HIP 공정이 PBF 기반 스테인리스강 316L 적층 소재의 피로 성능에 미치는 영향
오동진(Dongjin Oh),강용준(Yongjoon Kang),김기동(Gidong Kim),박소영(Soyoung Park),송상우(Sangwoo Song) 대한용접·접합학회 2020 대한용접·접합학회지 Vol.38 No.1
Additive manufacturing (AM) is an interesting technology with the potential to replace general fabrication techniques such as machining, forming and casting. AM provides two main benefits: greater freedom of part design and lower material consumption. To improve quality, many researchers have investigated the mechanical characteristics of AM products and additive parameters. In the present study, tensile and fatigue tests were conducted on stainless steel (SS) 316L manufactured using powder bed fusion (PBF) technology. These tests were carried out using two different building directions, along the Z and X axis, to investigate the effect of additive direction. In addition, the effects of hot isostatic pressing (HIP) related to fatigue properties, which can influence the volume density and porosity of the specimen, was studied. Based on the test results, changes in the mechanical characteristic and fatigue strength due to the HIP treatment were investigated.
오동진(Dongjin Oh),한현구(Hyungoo Han) 한국정보과학회 2009 한국정보과학회 학술발표논문집 Vol.36 No.2B
본 논문에서는 TCP/IP 방식의 동작 과정을 웹 기반 학습 시스템을 통해 구현하였다. 교육 시간이 5일 동안 35시간이란 직무 교육 환경과 교육대상이 실제 유지 보수 업무보다는 전산 행정 업무를 수행하는 공무원들을 염두에 두고 시스템을 설계 및 구현하였다. 이러한 교육환경에서 적합한 TCP/IP 교육 방법으로 기존의 상향식(bottom-up) 교육 방법이 아닌 하향식(top-down) 교육방법을 제안하였다. 또한, TCP/IP 의 각 계층에서 발생할 수 있는 취약점을 해당 계층에서 유기적으로 언급하여 보안 학습도 겸할 수 있도록 했다. 보안 학습은 실제 상황과 같은 효과를 낼 수 있도록 가상환경에서 실습이 가능하도록 하여 실제 시스템에는 영향을 주지 않도록 하였다. 또한 애니메이션을 적절하게 삽입하여 학습자들로 하여금 TCP/IP의 속성을 동적으로 이해할 수 있도록 구성하였다.
U-형태의 기생 패치를 가지는 U-슬롯 마이크로스트립 안테나
김지형(Jihyung Kim),오동진(Dongjin Oh),박익모(Ikmo Park),박용배(Yong-Bae Park) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.5
본 논문에서는 U-형태의 기생 패치를 가지는 U-슬롯 마이크로스트립 안테나를 제안하였다. U-슬롯에 의해 발생하는 2개의 공진에 기생 패치에 의한 공진을 추가하여 더 넓은 대역폭을 가지도록 설계하였다. 유전체를 포함한 안테나 복사 소자의 크기는 64×53 ㎟이며, 접지면과 유전체를 포함한 안테나의 전체 크기는 150×150×11.5 ㎣이다. 제안된 안테나는 VSWR<2를 기준으로 1.85~2.40 ㎓의 대역폭을 가져 DCS 1900, WCDMA, WiMax 등의 서비스 대역을 모두 만족하도록 설계하였다. 안테나의 복사 특성은 대역폭 내에서 비교적 일정한 형태를 유지하고, 빔 폭은 60° 정도이며, 7 ㏈i 이상의 이득을 갖는다. In this paper, we propose an U-slot microstrip antenna with the U-shaped parasitic patches. U-slot and parasitic patches make two resonant frequencies and one additional resonant frequency, respectively, so that the impedance bandwidth of the antenna is expanded. The size of radiator part is 64×53 ㎟ and the entire size of the antenna is 150×150×11.5 ㎣. The measured bandwidth is 1.85~2.40 ㎓. Thus, our antenna can be used for DCS1900, WCDMA and WiMax services. The radiation characteristic is almost same in the bandwidth, the beam width is about 60°, and the gain is more than 7 ㏈i.