http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송기동(K.D. Song),오연호(Y.H. Oh),김진기(J.K. Kim),임승일(S.I. Lim) 대한전기학회 2016 대한전기학회 학술대회 논문집 Vol.2016 No.3
본 논문에서는 대표적 지구온난화 가스인 SF6를 대체한 가스차단기의 차단성능 결과를 제시한다. SF6 가스를 대체하기 위해 CO₂혼합가스를 사용하였으며, CO₂의 혼합가스에 대한 차단성능 시험으로 SLF90, BTF T100a, T100s, T60의 차단시험결과를 제시한다. SF6에 비해 CO₂ 가스의 차단성능 및 절연성능이 20~30% 정도이므로 이 부분을 극복하는 설계에 집중하였다. 용삭요소(ablation element)의 적용, 양방향 동작(dual motion operation), 열-가스 배출구의 설계 등이 그 예이다. CO₂ 혼합가스 아크 현상을 해석하기 위해 압력 1~60bar, 온도 300~30,000K까지 범위의 composition data, transport coefficients, thermal dynamic property, radiation absorption coefficient 및 critical E-filed를 구하는 프로그램이 개발되었다. 구해진 물성 값들을 가지고 CO₂ 혼합가스 아크 플라즈마 해석이 이루어졌으며, 해석결과를 가지고 차단부의 압축실 체적, 팽창실 체적, 노즐형상, heating channel 등의 설계변수들이 정해졌다. 시험 전 G200(전류영점 전 200ns에서의 아크 컨덕턴스)과 post arc current로 SLF 차단성능을 예측하였으며, 열-가스의 Breakdown Index로 BTF의 차단성능을 예측하였다. 위와 같은 과정을 거쳐 설계 제작된 차단부의 실제 차단성능은 상기의 모든 시험항목을 통과하는 결과를 얻었다.
$Al_2O_3-ZrO_2$ 복합체의 강도 및 열충격 저항의 향상에 관한 연구
황규홍,배원태,최명덕,오기동,김경운,김환,Hwang, K.H.,Bae, W.T.,Choi, M.D.,Oh, K.D.,Kim, K.U.,Kim, H. 한국세라믹학회 1988 한국세라믹학회지 Vol.25 No.3
$Y_2O_3$가 $thickapprox$1mol.% 고용된 정방정 지르코니아를 알루미나에 20vol.% 섞어 체조립에 의해 과립으로 만든 다음 여기에 알루미나에 단사정 지르코니아를 10 ~30 vol.%섞어 만든 과립을 15~30vol.%가 되도록 과립형태로 분산시켜 성형 및 소결함으로써 단사정 및 정방정 지르코니아의 분산영역이 서로 다른 불균질 조직의 $Al_2O_3-ZrO_2$복합체를 제조하여 강도 및 열충격 거동을 관찰하였다. 이러한 불균질 조직의 $Al_2O_3-ZrO_2$ 복합체는 분산 agglomerate 내의 낮은 소결밀도에 의한 기공의 존재, 단사정상에 의한 미세균열, 또 이에 따른 주위에의 압축응력 등이 복합적으로 작용하여 향상된 열충격 거동을 보여 주었다. The strength and thermal shock resistance of $Al_2O_3-ZrO_2$ composites have been studied. The tetragonal $ZrO_2$ powder containing 1 mol.% $Y_2O_3$ and monoclinic $ZrO_2$ powder were prepared by coprecipitation method and subsequently mixed with $Al_2O_3$ powder and granulated by sieving. Duplex composites were prepared by dry mixing matrix agglomerate with 15 to 30 vol.% of dispersion agglomerate, followed by pressing and sintering at 1$600^{\circ}C$ for1 hr. These $Al_2O_3-ZrO_2$ 2 composites having heterogeneous structure showed improved thermal shock behaviors because of the microcracking and pores in dispersed granules, and compressive stresses around dispersed granules resulting from $ZrO_2$ transformation.
지르코니아 분말의 치밀화와 소결거동 : II. 소결거동
박홍채,김겸,김영우,이윤복,오기동,Park, H.C.,Kim, K.,Kim, Y.W.,Lee, Y.B.,Oh, K.D.,Riley, Frank L. 한국세라믹학회 1993 한국세라믹학회지 Vol.30 No.6
Sintering behaviour of zirconia powders prepared by different processing treatment was discussed. About >99% densities of theoretical were obtaiend on sintering at 140$0^{\circ}C$ for 2h in case of 300MPa uniaxially cold-pressed compact. But the lower densities were obtained on sintering above this temperature due to abnormal grain growth enabling the tetragonal to monoclinic phase transformation during cooling resulted in microcracks. All kinds of different dried powders exhibited nearly the same shrinkage behaviour with end-point shrinkage between 19 and 20%, and had maximum shrinkage rate (0.99~1.27%/min) around 120$0^{\circ}C$. During whole sintering process densification was mainly governed by grain growth and rearrangement of agglomerates. Heterogeneous abnormal grain growth and abrupt decrease in shrinkage were observed when continuous interagglomerate pore collapsed into isolated pores.