http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
엄철환,Eom, Chul-Hwan 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.5
합성보의 쉬어코넥트로 널리 사용되고 있는 스터드볼트는 현재 학회규준에 강재의 재질은 용접성을 고려한 SS400이 규정되어 있으며, 그 전단내력의 산정식은 압축강도 $300kgf/cm^2$ 이하의 콘크리트를 대상으로 하고 있다. 한편 합성구조의 보급에 따라 합성보 뿐만 아니라 다른 구조부분에서도 강재과 콘크리트를 결합하는 쉬어코넥트 혹은 다른 용도의 접합재의 필요성과 함께 강재와 콘크리트의 고강도화, 프리캐스트화가 예상된다. 따라서 본 연구에서는 고강도 콘크리트와 강부재를 결합하기 위한 고강도 스터드의 개발을 목적으로 행하여진 일련의 실험결과를 보고하였다. 또한 스터드의 강성을 증대시키기 위한 강관을 이용한 쉬어콘넥트(이하, 파이프 스터드라고 한다)를 고안하였다. 본 논문에서는 고강도 스터드의 용접성, 역학특성에 관한 실험적 검토와 동시에 고강도 고강성 스터드인 파이프 스터드의 강성 내력을 종래의 스터드 볼트와의 비교실험을 하여 파이프 스터드의 유효성을 검증한다. The headed studs used extensively for steel-composite construction are specified as SS400 in the current Korean Standard specification considering the welding condition. And the corresponding equation for the shear force calculation is limited for the use of compression strength of concrete below $300kgf/cm^2$. However, it is expected that the high strengthening and precasting of both steel and concrete due to the necessity of shear connector or other connecting material for the combination of steel and concrete. Therefore, the experimental results obtained during the development process of high strength stud for the connection of high strength concrete and the steel member are reported in this paper. Also the effectiveness of newly developed shear connector using pipe(pipe stud) to increase the stiffness of a stud is verified by comparing both the stiffness and the strength with common stud bolt through the welding ability, mechanical characteristics and experimental investigation.
천공 개구부가 있는 합성슬래브의 휨거동에 관한 실험적 연구
엄철환,김희철,박진영,Eom, Chul Hwan,Kim, Hee Cheul,Park, Jin Young 한국강구조학회 2006 韓國鋼構造學會 論文集 Vol.18 No.5
건축물의 바닥판에 대한 데크플레이트 합성슬래브 시스템의 사용이 점차 확대되어 최근에는 오피스 빌딩을 중심으로 널리 사용되고 있으나, 각종 건축 설비의 설치를 위하여 슬래브의 천공이 무분별하게 이루어지고 있다. 따라서, 본 연구에서는 건축 설비에 의하여 구조물의 주 구조체인 슬래브에 천공에 의한 개구부가 있는 경우, 휨 부재로써의 역학적 성능 저하에 대하여 실험을 통하여 분석하고자 한다. 본 연구에서는 골형 합성데크 슬래브에 대하여 개구부의 형태와 위치에 따라 시험체를 제작하여 정적 가력 실험을 수행하였다. 2점 정적 반복 가력을 통하여 하중 변위 관계 그래프를 도출하였으며 각 시험체의 연성과 에너지 소산 능력을 산출하였다. The composite metal deck plate system has been widely used of late for office structures. However, composite floor decks are bored imprudently for installation in building equipment. In this study, experimental investigations of bored composite steel deck slabs were performed to evaluate the flexural capacity of each specimen. The variables set were the shapes and positions of the openings in the composite slabs. The results were analyzed in the form of load-displacement graphs and with respect to the ductility and energy dissipation capacity ofeach specimen to evaluate its structural capacity.
철골주와 고강도프리캐스트판의 신형식합성주에 (新形式合成柱) 관한 연구
엄철환(Chul Hwan Eom),김동규(Dong Kyu Kim) 한국강구조학회 1991 韓國鋼構造學會誌 Vol.3 No.2
This paper deals with the elastic stiffness and ultimate bending strength of new type composite columns. A concept of this composite structure is shown in Fig. 1 Four precast concrete panels are combined with steel square tube by headed studs. These studs have two functions ; one is transmit the shear stress of concrete panels to steel tube, and the other is to prevent the spilt off action of panels. Holes are made in concrete panels to install panels around steel tube on which studs are welded. These holes are filled up by high-strength mortar. The purpose of composite columns is follows : (1) To enlarge the stiffness and strength of steel columns by combining with the concrete panels. These panels are also usefull as the fire resistance material of steel tube. (2) To improve the quality and productivity of structural system by eliminating the bar arrangement works and the panel work at construction site.
신형 데크플레이트와 철판망을 적용한 합성슬래브의 휨 거동
김명모,엄철환,Kim, Myoung Mo,Eom, Chul Hwan 한국강구조학회 2003 韓國鋼構造學會 論文集 Vol.15 No.4
건축물의 바닥판에 대한 합성슬래브 시스템의 사용이 점차 확대되어 오피스 빌딩을 중심으로 널리 사용되고 있다. 최근에는 주상복합형 및 주거용 건물에 대한 확대 적용을 휘해 하부면이 평탄한 플랫 데크플레이트의 필요성이 대두됨에 따라 플랫 데크플레이트가 개발되고 있다. 또한 합성슬래브시스템의 바닥판 상부에 와이어메쉬 대신 일체형으로 생산되는 익스팬디드 메탈을 적용할 경우, 원가 절감, 공기 단축 효과도 기대할 수 있을 것이다. 본 연구에서는 익스팬디드 메탈을 와이어메쉬의 대체재로 사용하여 이를 하부면이 평탄한 플랫 데크플레이트와 결합시킨 신형식의 합성블래브시스템을 제안하였다. 총 12개의 시험체에 대한 실험을 통해 그 구조성능을 평가하고자 하였다. 실험 결과는 시험체의 최대내력과 파괴거동 등을 중심으로 요약하여 나타냈다. The composite metal deck plate system has been widely used for office structures. Recently, however, the flat deck plate has been developed to apply the composite slab system to residential structures. Reduction in construction cost and time can be expected by using expanded metal instead of wire mesh as crack control reinforcements. This study proposed a composite slab system composed of a new-shaped steel deck plate and expanded metal. Twelve specimens were tested to evaluate the structural performance of the new composite slab system. The test results were summarized mainly in terms of maximum load carrying capacity and failure behaviors of each specimen.