http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양형식(Hyung-Sik Yang),김종관(Jong-Gwan Kim),최미진(Mi-Jin Choi),최병희(Byung-Hee Choi),류창하(Chang-Ha Ryu) 한국암반공학회 2007 터널과지하공간 Vol.17 No.4
도폭선의 길이를 조절하여 폭력이 조절되도록 축소모형 실험하는 방법을 제안하였으며 콘크리트 블록의 발파에 적용하여 타당성을 검토하였다. 제안된 방법은 폭원 조절이 가능하고 또 축소모형실험 방법으로서 타당한 것으로 판단된다. 또 폭발열을 이용하여 산정한 폭원 축소율은 상당한 근거가 있는 것으로 판단되었다. A method using detonating cord was suggested to control the blasting source for scaled model test. Blasting of 5 concrete block was carried out to verify the method. It was proved that blasting power can be controlled by suggested method. It seemed to be reasonable to use the reduction ratio based on the explosion heat.
양형식 ( Hyung Sik Yang ),김정규 ( Jung Gyu Kim ),고영훈 ( Young Hoon Ko ),피유시라이 ( Rai Piyush ) 대한화약발파공학회 2013 화약발파 Vol.31 No.1
강 부재와 콘크리트 부재에 대한 외부장약 발파 시 전색의 효과를 확인하기 위하여 전색 캡과 우레탄 폼, 모래 주머니 및 점토의 전색 재를 실험하였다. 실험결과로 전색 캡과 우레탄 폼, 모래 주머니는 전색효과를 기대할 수 없었으나 점토전색의 경우 부재의 완전 절단에 필요한 장약 량에 대해 20%의 장약절감 효과를 확인 할 수 있었다. 실험의 결과로 볼 때 표준장약 식에 의한 장약 량 산정 법이 다소 보수적인 것으로 나타났다. External charges with four different kinds of tamping materials are tested to determine the effect of tamping on the blasting of steel components and concrete blocks. The tamping materials used are tamping cap, urethane foam, sand bag and mud. As a result, the tamping cap, urethane foam, and sand bag show no significant effect of tamping. But the mud tamping shows that the charge amount can be reduced by more than 20% in completely cutting the structural components. In addition, it is found from the test that the standard equation for calculating the proper charge is rather conservative, which means the equation overestimates the necessary charge for the blasting.
양형식 ( Hyung Sik Yang ),장형두 ( Hyong Doo Jang ),고영훈 ( Young Hun Ko ),김승준 ( Sung Jun Kim ),문희숙 ( Hee Sook Moon ) 대한화약발파공학회 2011 화약발파 Vol.29 No.1
일반구조용 압연강재인 SS400과 용접구조용 압연강재인 SM490에 대하여 폭발위력의 기준 약으로 사용되는 TNT를 이용한 붙이기 폭파절단실험을 실시하였으며, TNT 약량에 따른 강재의 절단 및 강종별 절단 특성에 대하여 검토하였다. 그 결과로서 SM490 강재의 폭파저항성이 SS400 강재 보다 약량기준 약 30% 이상임을 확인할 수 있었다. Concussion shots were conducted for SS400, a general structural steel, and SM490, a structural steel for welding, using TNT, which is used as a standard explosive. The ability to cut the steels was compared for different combinations of charges and materials. The results show that the amount of explosives used for SM490 requires more 30% than SS400.