http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수량 및 과방중 조절에 따른 ‘거봉’ 포도의 품질 및 생육 비교
심성보(Sung-Bo Shim),권용희(Yong-Hee Kwon),홍윤표(Yoon-Pyo Hong),박희승(Hee-Seung Park) 한국원예학회 2007 원예과학기술지 Vol.25 No.4
‘거봉’ 포도 재배에서 착과량이 과실 품질에 미치는 영향을 알아보기 위하여 생산량을 10a당 다(약 2,500㎏) 와 소(약 1,800㎏)로 구분하여 과실 품질을 비교하였으며, 또한 과방중에 따른 과실 품질을 비교하기 위하여 각 수량 처리별로 강(약 350g), 중(약 500g), 약(약 700g)으로 구분하여 적과처리를 하였다. 과실 수확은 만개 90일에 농촌진흥청 원예연구소 포도연구센터의 칼라차트를 이용하여 착색도 8 이상의 과실을 선발하여 1차 수확하였고, 만개 108일에 남은 과실을 모두 수확하였다. 10a당 생산량을 달리 했을 경우 적과 처리를 같게 하더라도 생산량을 적게 했을 때 과립중, 종경, 횡경이 큰 것으로 조사되었다. 과실의 당도는 강하게 적과 하였을 경우에는 10a당 생산량에 따라 차이가 거의 없었으나 적과 정도를 중간 정도나 약하게 했을 때는 생산량을 적게 했을 떄 더 높았으며, 산도는 생산량이나 적과 정도에 따라 차이가 없었다. 열과 발생률은 10a당 생산량이 많을 때 현저히 높았으며, 1차 수확률은 수량을 약 1,800㎏으로 조절했을 때 2,500㎏을 생산할 때보다 2배 이상 많이 수확할 수 있었다. 가지 등숙도 또한 수량을 적게 했을 때 현저히 높은 것으로 조사되었다. 전체적으로 10a당 수량을 적게 하고 강하게 적과하는 것이 품질과 열과 발생, 착색도 등 모든면에서 우수하였다. To find out proper crop load in ‘Kyoho’ grapevine, crop load was adjusted as heavy (about 2,500 ㎏ㆍ10 a⁻¹) and light (about 1,800 ㎏ㆍ10 a⁻¹) degrees, and cluster thinning was achieved by three degrees, light (about 700 g/cluster), medium (about 500 g/cluster), and strong (350 g/cluster). At 90 days after full bloom (DAFB), clusters with over than 8 coloring degree, which was measured by the color chart developed by National Horticultural Research Institute, RDA, Korea, were harvested. Then, the rest was harvested at 108 DAFB. All berry clusters produced larger berries in the vines with light crop load. The berry cluster with strong berry thinning did not show any difference in soluble solids content regardless of the difference in crop load. However, the berry clusters with medium and light berry thinning had higher soluble solids in the vines with light crop load. There were no differences in titratable acidity according to treatments. Heavy cropping delayed berry ripening with more frequent berry cracking. Light cropping showed more even berry ripening with higher fruit quality.
심성보(Sung Bo Shim),박영준(Young Jun Park),김영주(Young Joo Kim),김정길(Jeong Gil Kim),김종문,김경욱(Kyeong Uk Kim) 대한기계학회 2015 대한기계학회 춘추학술대회 Vol.2015 No.11
Rotary clap pumps were developed to convert the positive displacement reciprocating pumps into rotary version in positive displacement pumps. To predict the pump performance and efficiency, the pump flow and torque loss were analyzed based on Newton’s viscosity law. Using these analyzed results, the optimal design parameters were studied, and the pump performance were predicted.