http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
주요 국산 침엽수 통원주 부재의 송풍오-븐건조 특성 -제1보: 국산 낙엽송 통원주 부재를 중심으로-
이남호 ( Nam Ho Lee ),( Xue Feng Zhao ),신익현 ( Ik Hyun Shin ),이창진 ( Chang Jin Lee ) 한국목재공학회 2012 목재공학 Vol.40 No.1
낙엽송 원통형 원주목에 대하여 수증기댐처리와 코팅처리를 실시하여 오-븐건조 하면서 건조속도, 재내의 수증기압 및 재온분포 및 건조할렬 등을 조사한 결과는 다음과 같다. 생재에서 난방된 실내의 이용함수율 수준인 함수율 약 8%까지 건조하는데 72~144시간 소요되었다. 무처리재와 코팅처리재는 전 건조기간에 걸쳐 통공층의 온도가 통피충의 온도보다 항상 높은 분포모형을 보인 반면, 수중기댐처리재의 경우 통피충의 온도가 통공충 보다 높기나 같은 분포를 보였다. 수중기댐처리재와 코팅처리재의 경우는 거의 전 건조기간에 걸쳐 통피층의 수증기압이 통공층 보다 큰 분포를 보였다. 총체적으로 할렬발생 정도는 미약하였으며 할렬개수는 코팅처리재, 수증기댐처리재, 무처리재의 순으로 양호한 것으로 나타났다. This study examined the effects of the drying rate, temperature distribution and vapor pressure on the surface checks occurring during the air circulating oven-drying of hollowed short Japanese larch (Larix Kaemferi C.) round posts treated with coating (CO) and vapor-dam (VD). The hollowed round posts could be dried from the green condition to a moisture content of approximately 8% in 72 to 144 hours. The temperature in the hole was higher than chat inside of wood for Control and VD specimens, while VD specimen showed opposite distribution. The vapor pressure inside the wood was higher than that in the hole for the CO and VD specimens during hole drying stage. There were few surface checks found in the specimens but the number increased in order the of GO, VD and Control specimens
중심부분 엔드코팅처리가 국산 소나무와 잣나무 중목구조부재의 고온저습건조 특성에 미치는 영향
이창진 ( Chang Jin Lee ),이남호 ( Nam Ho Lee ),엄창득 ( Chang Deuk Eom ),신익현 ( Ik Hyun Shin ),박문재 ( Moon Jae Park ),박주생 ( Joo Saeng Park ) 한국목재공학회 2013 목재공학 Vol.41 No.3
본 연구에서는 중심부분 엔드코팅처리가 소나무와 잣나무 중목구조부재의 고온저습건조에 미치는 영향을 알아보기 위해 수행되었다. 건조에 소요된 시간은 총 268시간이었으며, 최종함수율은 소나무의 경우 정각기둥재와 원주기둥재 모두 9.2∼10.8%, 잣나무 정각기둥재 15.0∼22.0%, 원주기둥재 12.8∼20.4% 범위로 조사되었다. 소나무재의 경우 함수율 분포가 균일한 반면, 잣나무재는 부분적으로 고함수율 부위가 존재하였다. 재면할렬은 잣나무가 더 많이 발생되었으며, 부분엔드코팅처리는 재면할렬 예방에 큰 효과가 없는 것으로 조사되었다. 내부할렬은 두 수종 모두에서 발생되었다. 표면경화율은 소나무재 3.7∼9.1%, 잣나무재 20.9∼35.8%로 경미한 크기의 잔류응력이 존재하였다. This study was performed to identify the effect of end-coating around pith of heavy timbers of Red pine and Korean pine on high temperature and low humidity drying characteristics. Total drying times were 268 hours, and ranges of final moisture content was investigated that Red Pine 9.2% to 10.8% MC for square and round timber, in case of Korean Pine 15.0% to 22.0% MC for square timber, 12.8% to 20.4% MC for round Limber. Moisture content distribution of Red Pine was a uniform, but part of high moisture content was found in Korean Pine. In case of Korean pine, the surface checks were occurred more severe than in case of Red pine, and end-coating treatment were investigated to be ineffective on surface check. The internal checks were only formed on the two timbers. The value of the case hardenings was investigated that the ranges 3.7% to 9.1% for Red pine. In case of Korean pine, on the other hand, the case hardenings presence a few as 20.9% to 35.8%.