http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
장주석,신상영,이수영,Jang, Ju-Seog,Shin, Sang-Yung,Lee, Soo-Young 대한전자공학회 1989 전자공학회논문지 Vol. No.
신경회로의 이차 비선형 연상기억모델을 광학적으로 구현하였다. 이 때 신경소자들 간의 가중 $N^3$연결은 광벡터-행렬 곱셈기와 연결홀로그램으로 실현하였고 구성된 시스템이 연상기억작용을 나타냄을 관측하였다. Optical implementation of a quadratic associative memory model of neural networks is reported. Weighted $N^3$ interconnections between neurons are realized with an optical matrix-vector multiplier and interconnection holograms.
쇄기형 유전체의 양면에 평면파 입사시 다극전개를 이용한 회절패턴 계산
김세윤,나정웅,신상영,Kim, Se-Yun,Ra, Jung-Woong,Shin Sang-Yung 대한전자공학회 1989 전자공학회논문지 Vol. No.
임의의 각을 가진 쇄기형 유전체의양 경계면을 E-편파된 평면화가 입사할 경우 발생하는 전자파의 회절패턴을 기하광학해와 모서리회절파의 합으로 표시하였다. 모서리 회절파의 회절계수는 물리광학근사로 구한 회절계수를 모서리 끝에 분포한 다극선전원으로 수정하여 구하였다. 쇄기각 $120^{circ}$, 입사각 $60^{circ}$ 인 유전체의 비전율을 2, 5, 10으로 변화시키고, 측정거리도 모서리 끝점으로 부터 5와 10파장인 경우에 대해 기하광학해와, 물리광학해, 다극선전원으로 교정한 수정해 순으로 각각의 회절패턴을 그림으로 나타내었다. 본 논문에서 구한 수정해는 모서리 끝점으로 부터 멀리 떨어진 곳에서만 유용한 점근해임을 알 수 있으나, 유전체 경계면에서 경계조건을 만족함을 보였다. Diffraction patterns of electromagnetic fields for the incidence of E-polarized plane wave on both interfaces of an arbitrary-angle dielect wedge are obtained by sum of geometric optics term and the edge diffracted fields. The diffraction coefficients of the edge diffracted fields are evaluated by employing the physical optics approximation and then correcting its error with the multipole line source at the dielectric edge. For the wedge angle $120^{circ}$, the incident angle $60^{circ}$, the relative dielectric constant of the dielectric wedge, 2, 5, and 10, and the observation distance from the tip of the wedge, 5 and 10 wavelength, the diffraction coefficients and the diffraction patterns corresponding to geometric optics, physical optics, and the solution corrected by the multipole line source are plotted, respectively. While the corrected solutions presented in this paper are valid only in the far-field region, these asymptotic solutions show to satisfy the boundary condition on the dielectric interfaces.
크기가 다른 전극폭을 갖는 4분기 광도파로형 열광학스위치
송현채,이태형,신상영,Song, Hyun-Chae,Rhee Tae-Hyung,Shin, Sang-Yung 대한전자공학회 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.6
다분기 열광학 스위치는 수위칭 상태에 딸 요구되는 소비전력의 차이가 큰 단점이 있다. 이를 개선하는 방법으로 전극형태에서 외측전극폭을 내측전극폭에 비해 크게 설계하고 굴절률차이가 큰 코아와 클래드 물질을 사용하여 상부클래드의 두께를 얇게 하는 방법을 제안한다. 제안된 형태의 4분기 열광학스위치는 테플론과 폴리이미드계 폴리머 물질을 사용하여 제작되었고 1550 nm 파장대에서 그 특성을 측정하였다. 제작되어진 4분기 열광학스위치는 310~390 mW 정도의 소비전력에서 -16 dB 이하의 누호 특성을 나타 내어 스위칭 상태에 따른 소비전력의 차가 줄었을 뿐만 아니라 스위칭에 필요한 소비전력도 상당히 줄었다. 그리고 4.7 dB 정도의 삽입손실과 1 ms 이하의 스위칭 속도를 얻었다. A multi-branch thermo-optic switch has a problem that driving powers in the switching states are different from each other; the power consumption for the inner output port is more than twice as large as that form the outer output port. In this pater, to solve this problem unequal width heaters and the waveguide structure with a thin overcladding layer are proposed in a four-branch thermo-optic switch. The proposed structure is fabricated with the polymer materials with high index difference, Teflon and polyimides. The fabricated device was measured at the wavelength of 1550 nm. The measured characteristics exhibit the smaller difference in the power consumption between the switching states and the driving power les than the previous four-branch thermo-optic switch with equal width heaters. As for the device performance, the crosstalk is better than - 16 dB at about 310 ~ 390 mW, the insertion loss is 4.7 dB, and the switching time is less than 1 ms.