http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
동구조물(銅構造物) 진단(診斷)을 위한 기음파(起音波) 센서
신병철 ( Shin Byoung-churl ) 한국구조물진단유지관리공학회 1998 한국구조물진단유지관리공학회 논문집 Vol.2 No.2
The team mixed PbO, ZrO<sub>2</sub>, TiO<sub>2</sub>, Nb<sub>2</sub>O<sub>5</sub> and MnCO<sub>3</sub> to make Pb[(Zr<sub>0.54</sub> Ti<sub>0.46</sub>) Nb<sub>0.005</sub>]O<sub>3</sub> + 4%MnCO<sub>3</sub>. The electroded PZT ceramics were poled by 3 kV/㎜ at 110℃ for 600 s. We assembled the 0.4mm thick PZT slices into ultrasonic transducers. Central frequency of the probe is 5 MHz, which is proper to the thickness gauge for steel pipes and for flaw detector. The probe can detect a disk shape defect of 1㎜ diameter at 15cm deep in steel block. The new probe’s Fresnel zone that the ultrasonic beam do not broaden is 13㎜. Over the Fresnel zone, the ultrasonic beam spreads. Half of the beam spread angle of the probe is 4.3°-4.6°. This probe can be used for the ultrasonic transducers for non-destructive testing of steel bridges.
정화영 ( Jeong Hwa-young ),유승엽 ( You Seung-youp ),신병철 ( Shin Byoung-churl ),정범석 ( Jung Beom-seok ),이창무 ( Yi Chang-moo ) 한국구조물진단유지관리공학회 1998 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.2 No.2
초음파 비파괴검사에 관한 KS규격(KS B 0896)에서는 하중 방향에 따른 결함의 위치와 방향을 고려하지 않고 단순히 결함의 크기(길이)만으로 부재의 합·부 판정을 하고 있다. 유한 요소법(FEM) 프로그램을 이용하여 결함의 위치와 방향에 따라서 부재에 미치는 영향이 다름을 보였다. 결국 결함 위치에 따라 합·부 판정을 달리 해야 된다는 사항을 제안하고자 한다. KS-code(KS B 0896) for nondestructive ultrasonic testing classify the quality level by ratio or flaw size to plate thickness only. But stress distributions using finite element analysis show that location of the flaws are more important than the flaw size. So, KS-code should take the effect of flaw location for classifying the quality level of welded steel structures.