http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지구삼,김충언,신동기,최동호,Ji, Gu Sam,Kim, Choong Eon,Shin, Dong Ki,Choi, Dong Ho 대한토목학회 2013 대한토목학회논문집 Vol.33 No.2
k-factor법은 합성교량의 설계에서 부정정 응력을 산정하는 방법으로 널리 사용되고 있다. 이 방법의 적정성을 평가하기 위하여 2경간 연속 강합성거더에 대하여 등가하중법과 비교하였다. k-factor법은 크리프에 대해서는 강재응력을 과소평가하고, 부모멘트 구간에서는 응력의 방향을 반대로 산정하며, 건조수축이나 온도차에 대해서는 단면변화를 고려하지 못하는 것을 확인하였다. 이 논문에서는 k-factor법의 정확성을 개선하면서, 계산의 편리성은 유지할 수 있는 j-factor법을 제안하였고, 그 효과를 2경간 연속 강합성거더에 적용하여 검증하였다. The k-factor method has been widely used in design of steel-concrete composite bridges to determine indeterminate stresses. The accuracy of k-factor method is examined by a comparative analysis with the equivalent load method in a continuous 2-span composite bridge. To improve the accuracy, the direction of creep stress has to be modified and the variety of section must be considered. This paper suggests j-factor method which can improve the accuracy of k-factor method with simple modification.
이승준,구민세,정란,신동기,Lee, Seung-Joon,Koo, Min-Se,Chung, Lan,Shin, Dong-Ki 한국전산구조공학회 1991 전산구조공학 Vol.4 No.3
내진설계를 하고 있는 나라들이 채택하고 있는 내진해석방법중 가장 일반적인 응답스펙트럽법(Response Spectrum Method)은 지진하중을 정적 수평하중으로 치환하여 정적해석하는 것을 기본으로 하고 있다. 여기서 계산된 대치수평하중은 구조물의 소성화에 따른 비선형거동으로 부터 오는 에너지분산현상 및 감쇠(damping)현상 등을 고려하기 위하여 소위 반응수정계수(behavior factor)란 일정수로 나누어 준다. 응답스펙트럼법에 의한 내진설계의 정확도를 좌우하는 지금까지 사용되어지고 있는 반응수정계수는 정확한 계산값들이 아닌 경험적인 값들이다. 반응수정계수를 해석적으로 결정하기 위해서는 구조물의 극한상태에 대한 정의가 선결되어져야 한다. 본 논문에서는 지진하중하에서 강구조물의 한계상태를 기하학적측면과 사용성 측면 및 재료공학적 측면에서 검토하였고 3가지 형태의 구조물을 모델로 하여 반응수정계수를 계산하였다. The procedure of the elastic response spectrum method which is used in the codes of many countries involves the computation of a static horizontal substitute loading resulting from the earthquake. The substitute loading is divided by a behavioral factor in order to take energy dissipation due to the real nonlinear structural behavior and damping effects ect. into account. The behavioral factors widely used in many countries are based not on the exact calculation but only on the empirical data. In order to determine the behavioral factors analytically, it is necessary to define the limit state of structures as a first step. In this work, the methods of the determination of limit state for the steel structures are discussed in the geometric, serviceabile and material apsects, and the behavioral factors for the three types of structures are calculated.
구민세(Min Se Koo),신동기(Dong Ki Shin) 한국강구조학회 1993 韓國鋼構造學會誌 Vol.5 No.2
Bracing elements are being widely used in the construction of steel frame structures due to their ability to increase the lateral rigidity. However, the hysteresis behavior of the bracing members is quite complex because of buckling combined with yielding. This makes response computation of a braced frame more complex than that of an unbraced frame. For this reason, this study presents a procedure for modeling these axial members for use in computer-aided dynamic analyses when large inelastic cyclic deflections are anticipated. In order to include the effects of compressive load capacities for bracing members with large slenderness ratio, a mathematical model has been proposed. This mathematical model is used in computing the responses of one and two story braced steel frames subjected to artificially simulated earthquake loading, and the ductility factors are calculated.