http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
송철기(Chul-Ki Song),오대일(Tae-Il Oh) 한국자동차공학회 2001 한국자동차공학회 지부 학술대회 논문집 Vol.- No.-
Vehicle acceleration data from an accelerometer and wheel speed data from standard, 50-tooth anti-lock braking system wheel speed sensors are used to estimate the absolute longitudinal speed of a vehicle. An intuitive solution to this problem is, When wheel slip is low, calculate absolute velocities from the wheel speeds; when wheel slip is high, calculate absolute velocity by integrating the accelerometer. Due to its strength and flexibility in translating this type of word-based rule into numerical solutions, we use fuzzy logic to implement the above idea. I compare experimental results from three variants of this basic algorithm and find that it is possible to estimate absolute longitudinal vehicle speed with a 6% worst-case error during a hard braking maneuver lasting three seconds.<br/>
대형항공기 날개 리브 가공을 위한 자동화 공정 시뮬레이션
송철기(Chul Ki Song),이대건(Dae-geon Lee),이창범(Chang-beom Lee),김갑순(Gab-soon Kim Kim) 한국기계가공학회 2020 한국기계가공학회지 Vol.19 No.9
In this study, the automatic processing of the wing ribs of large aircraft was simulated. Specifically, in the simulation for the automatic processing of the fly ribs, the process of the automated loading device with a robot was examined, along with the wing rib processing and manufacturing automation processes. Moreover, the process time, corresponding to all the stages in the wing rib processing, was calculated. The results pertaining to the machining and manufacturing times of 34 wing ribs (Nos. 1–17), as obtained through the proposed simulation approach, indicated that the total machining time for the left and right wing ribs and rib guns was 537.7 h. The production time was calculated as 1,117.4 h. It is considered that the processing of the wing ribs of large aircraft can be automated in a factory, based on the results of the proposed simulation process.
송철기(Chul Ki Song) 한국자동차공학회 2001 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2001 No.11_2
추돌회피장치와 자동화고속도로 시스템 등과 같은 선진안전차량을 개발하기 위해서는 정상주행조건에서는 물론 급발진이나 급제동 하에서도 차량절대속도를 잘 추정하여 차량의 안전을 확보하여야 한다. 차량절대속도를 추정하기 위하여 가속도계로부터의 차량가속도데이터와 ABS(Anti-locking braking system) 장착차량에 사용되고 있는 바퀴 속도센서로부터의 바퀴각속도데이터를 이용하였다. 차량절대속도를 추정하는 세가지 기본 알고리즘을 구성하고 실험으로 검증하였으며, 급제동이 3초 이상 지속되는 상황 하에서도 차량절대속도를 6% 오차 내 추정할 수 있음을 확인하였다.
송철기(Chul Ki Song),권진회(Jin-Hwe Kweon) 한국공학교육학회 2008 공학교육연구 Vol.11 No.4
GNU(Gyeongsang National University)-PSU(Pittsburg State University) and GNU-OSU(Ohio State University) joint program are developed for our global engineering education. Though the SAE Baja program and the engineering management program with PSU, and the mechanical engineering program with OSU, our students have learned the capstone design, the engineering management, and the mechanical engineering as well as English conversation. After these joint programs, our students have improved English ability and have got good jobs as global leaders. 경상대-피츠버그주립대학교, 경상대-오하이오주립 대학교 간의 국제교류 프로그램은 글로벌 공학 교육을 위해 개발된 프로그램이다. 피츠버그 주립대학교와 SAE Baja 프로그램과 공학경영 프로그램을 각학기별로 구성하였으며, 오하이오 주립대학교와 기계공학 프로그램을 수행함으로써, 어학 향상을 이룸과 동시에 종합설계, 공학경영, 전반적인 기계공학을 익히게 된다. 연수후에는 학생들의 어학능력이 현저히 향상되고 있음을 확인할 수 있으며, 졸업 후에는 거의 전원이 산업체 취업을 하고 있어 취업률 향상과 취업의 질적 향상에 큰 도움이 되고 있음을 알수 있다.
송철기(Chul Ki Song),공덕근(Doeg Geun Kong) 한국자동차공학회 2003 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
This paper treats the problem of estimating the longitudinal velocity of a braking vehicle using measurements from an accelerometer and wheel speed data from standard anti-lock braking wheel speed sensors. We develop and experimentally test the velocity estimation algorithms with acceleration offset correction.<br/>
SAE Mini-Baja Project를 통한 국제교류교육
송철기(Chul Ki Song),이석순(Seok Soon Lee),John L.lley,Choong Lee,Mattew Keller 한국자동차공학회 2004 오토저널 Vol.26 No.4
This Paper is the Installment and Highlights a Program That Resulted from GNU-PSU Summer Workshop Recommendations. As a Direct REsult of the Students Learning about the SAE Mini-Baja and Experiencing it in the GNU-PSU Summer Program, the ldea for the GNU-PSU Joint Mini-Baja Project was Developed. A Proposal was Submitted to GNU and the Korean Government, Which was Subsequently Approved and the Project Implemented. The First Part of This Paper Covers the Major Elements of the Program's Proposal(i.e.,Continuance of the Program)and the Second Part Addresses the Actual Program, as Implemented.
송철기(Chul Ki Song),권진회(Jin-Hwe Kweon) 한국공학교육학회 2008 공학교육연구 Vol.11 No.2
경상대-피츠버그주립대학교, 경상대-오하이오주립 대학교 간의 국제교류 프로그램은 글로벌 공학 교육을 위해 개발된 프로그램이다. 피츠버그 주립대학교와 SAE Baja 프로그램과 공학경영 프로그램을 각학기별로 구성하였으며, 오하이오 주립대학교와 기계공학 프로그램을 수행함으로써, 어학 향상을 이룸과 동시에 종합설계, 공학경영, 전반적인 기계공학을 익히게 된다. 연수후에는 학생들의 어학능력이 현저히 향상되고 있음을 확인할 수 있으며, 졸업 후에는 거의 전원이 산업체 취업을 하고 있어 취업률 향상과 취업의 질적 향상에 큰 도움이 되고 있음을 알수 있다. GNU(Gyeongsang National University)-PSU(Pittsburg State University) and GNU-OSU(Ohio State University) joint program are developed for our global engineering education. Though the SAE Baja program and the engineering management program with PSU, and the mechanical engineering program with OSU, our students have learned the capstone design, the engineering management, and the mechanical engineering as well as English conversation. After these joint programs, our students have improved English ability and have got good jobs as global leaders.