http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스트리머 방식 탐사 자료의 동시 송신원 전파형 역산을 위한 Global correlation 기반 목적함수 최적화 연구
손우현 ( Woo Hyun Son ),편석준 ( Suk Joon Pyun ),장동혁 ( Dong Hyuk Jang ),박윤희 ( Yun Hui Park ) 한국지구물리·물리탐사학회 2012 지구물리와 물리탐사 Vol.15 No.3
동시 송신원 전파형 역산 기법은 계산량을 획기적으로 줄여 전파형 역산의 적용성을 높여준다. 그러나 다수의 송 신원 모음 자료를 동시에 모델링하여 사용하기 때문에 관측 자료의 수진기 위치가 송신원에 따라 다른 경우, 나머지 (residual) 파동장에 불필요한 값을 생성하게 되고 이는 파형역산의 수렴성을 저해하게 된다. 특히, 제한된 벌림 거리(offset) 를 갖는 스트리머 방식의 탐사자료는 동시 송신원 기법을 적용하기에 가장 어려운 자료 형태이다. 이러한 문제점을 극복 하기 위해 최근에 global correlation에 기반한 목적함수가 제안되었고, 시간영역 전파형 역산에 성공적으로 적용되었다. 그러나 이 기법은 변형된 목적함수를 사용하기 때문에 나머지 파동장이 왜곡되고 경우에 따라 역산 결과에 부정적인 영 향을 주기도 한다. 또한, 여러 가지 장점을 갖고 있는 주파수 영역 파형역산에 적용된 사례는 아직 보고된 적이 없다. 본 논문에서는 이러한 나머지 파동장의 왜곡을 최소화하기 위해 global correlation 계산 시 사용하는 자료에 진폭감쇠 기법 을 적용한다. 진폭감쇠를 적용한 자료는 global correlation의 특성을 최적화하여 나머지 파동장의 왜곡을 줄이고 파형역 산 결과를 향상시킨다. 시간 영역에서 구한 나머지 파동장을 주파수 영역에서 역전파시킴으로써 global correlation기법을 주파수 영역에서 구현한다. 스트리머 방식의 합성 탐사자료를 이용한 예제를 통해 본 논문에서 제안한 기법이 기존의 global correlation 목적함수에 기반한 동시 송신원 전파형 역산보다 향상된 결과를 얻을 수 있음을 보여준다. The simultaneous-source full waveform inversion improves the applicability of full waveform inversion by reducing the computational cost. Since this technique adopts simultaneous multi-source for forward modeling, unwanted events remain in the residual seismograms when the receiver geometry of field acquisition is different from that of numerical modeling. As a result, these events impede the convergence of the full waveform inversion. In particular, the streamer-type data with limited offsets is the most difficult data to apply the simultaneous-source technique. To overcome this problem, the global-correlation-based objective function was suggested and it was successfully applied to the simultaneous-source full waveform inversion in time domain. However, this method distorts residual wavefields due to the modified objective function and has a negative influence on the inversion result. In addition, this method has not been applied to the frequency-domain simultaneous-source full waveform inversion. In this paper, we apply a timedamping function to the observed and modeled data, which are used to compute global correlation, to minimize the distortion of residual wavefields. Since the damped wavefields optimize the performance of the global correlation, it mitigates the distortion of the residual wavefields and improves the inversion result. Our algorithm incorporates the globalcorrelation- based full waveform inversion into the frequency domain by back-propagating the time-domain residual wavefields in the frequency domain. Through the numerical examples using the streamer-type data, we show that our inversion algorithm better describes the velocity structure than the conventional global correlation approach does.
손우현 ( Woo Hyun Son ),편석준 ( Suk Joon Pyun ),곽상민 ( Sang Min Kwak ) 한국지구물리·물리탐사학회 2011 지구물리와 물리탐사 Vol.14 No.3
본 논문에서는 시간영역에서 분리된 잔여 파동장을 이용하여 주파수영역 파형역산을 수행하였다. 시간영역 잔여 파동장들을 절대값의 크기에 따라 정렬하여 분류하고, 이를 여러 개의 그룹으로 분리하였다. 분리된 잔여 파동장들은 각 그룹별로 목적함수의 경사 방향을 정규화한 후 평균하기 때문에 통상적인 잔여 파동장에서 작은 크기를 가지는 파동장들을 상대적으로 강조하는 효과가 있고, 이는 파형역산 시 심부구조의 이미지 향상에 도움을 준다. 파형역산은 시간영역에서 분리된 잔여 파동장을 이용하여 주파수영역에서 수행되며, 목적함수의 경사방향은 구조보정에서 많이 쓰이는 역전파 기법을 적용하여 계산된다. 본 연구에서 제안한 알고리듬의 타당성을 확인하기 위하여 SEG/EAGE 암염 모델과 Marmousi 모델을 이용하여 파형역산을 수행하였다. 역산 결과를 통해 제안된 알고리즘이 일반적인 주파수영역 파형역산에 비해 심부구조에 대하여 향상된 결과를 제시함을 확인하였다. We perform the frequency-domain waveform inversion based on the residual-selection strategy. In the residualselection strategy, we classify time-domain residual wavefields into several groups according to the order of absolute amplitudes. Because the residual wavefields are normalized after regularization of the gradient directions within each group, the residual-selection strategy plays a role in enhancing the small-amplitude wavefields, which contributes to improving the deep parts of inverted subsurface images. After classifying residuals in the time domain, they are transformed to the frequency domain. Waveform inversion is performed in the frequency domain using the backpropagation technique which has been popularly used in reverse-time migration. The residual-selection strategy is applied to the SEG/EAGE salt and IFP Marmousi models. Numerical results show that the residual-selection strategy yields better results than the conventional frequency-domain waveform inversion.
손우현,박상진,정재영,김재혁,빈향욱,목학수,Son, Woo Hyun,Park, Sang Jin,Jeong, Jae Yeong,Kim, Jae Hyuk,Bin, Hyang Wook,Mok, Hak Soo 한국자원리싸이클링학회 2016 資源 리싸이클링 Vol.25 No.4
전 세계적으로 자동차 산업에서 사용된 제품을 위한 재제조는 신제품에 비해 에너지와 자원 소모율을 크게 감소시킬 수 있는 장점을 가지고 있다. 본 논문에서는 자동차 부품중 하나인 스로틀바디를 대상으로, 재제조 세부 공정을 분석하고, 각 세부 공정별 고장모드 및 이에 대한 FMEA 도출 및 많은 고장유형에 대한 심각도, 검출도, 발생도의 정도를 결정하는 것이다. 그리고 RPN값을 계산하는데 사용되고 있는 현재 RPN방법과 제안하고자 하는 세 가지 방법인 합산법, 제곱근법, 볼륨법에 대하여 비교하고자한다. In global automobile industry, the remanufacturing for used products has the merit to be reduced nearly 80 percent of energy consumption and resources of new product. The objective of this paper is the analysis of detailed remanufacturing processes about research object and failure modes of each process of throttle body which is one of automobile parts, to draw a FMEA and determine the degree of seriousness (S), detection (D) and occurrence (O) of many failures. And we compared the current RPN method of being used to calculate values of RPN with three suggested methods. : Summation method, Square root method, Volume method.
손우현,목학수,Son, Woo Hyun,Li, Wen Hao,Mok, Hak Soo 한국자원리싸이클링학회 2018 資源 리싸이클링 Vol.27 No.2
The need for remanufacturing automotive parts is required due to the depletion of resources, rising raw material prices and strengthening environmental regulations. For remanufacturing, stable supply and demand of core must be accompanied. At present, remanufacturing companies collect cores through various routes, but the recovery rate of cores from the End-of-Life Vehicles is low. If we can systematically collect cores from hundreds of thousands of ELVs that were generated each year, the recovery rate of the core for remanufacturing will be further improved. Therefore, in this paper, we tried to establish a classification system for the ELV as a method for collecting the cores from the ELV. First, we selected the elements affecting the classification and determined the scope for the evaluation. The final rating classification is established by calculating the weights among the influence elements. Finally, through the case study, the dismantling grade of the actual ELV was evaluated to derive the second grade.