미술작품의 유방 실루엣 비율에 근거한 20대 여성의 바람직한 유방형태와 유형별 컵 설계에 관한 연구

손부현 ( Boo Hyun Sohn ),권수애 ( Soo Ae Kweon ) 한국의류학회 2013 한국의류학회지 Vol.37 No.3

This paper analyzes desirable breast types using measurements from 31 selected female subjects based on the ratio of breast in works of art and to design a brassiere cup design according to the breast type of 182 female subjects in their 20s. The subjects selected for this paper are somewhat larger than a previous study on aesthetically perfect breasts of foreigners according to chest breadth, center neck point to breast point, breast circumference, and breast volume. However, the aesthetic breasts of foreigners are larger than the subjects selected for this study according to chest depth, under-bust circumference, and bust point to bust point. Comparing various breasts types and aesthetic breasts, padding is necessary to complement the form of flat breasts to increase the volume and diameter. Brassiere cups for cone-shaped breasts should be designed to increase breast volume through an increase in nipple height. Hemisphere breasts should be designed to increase the overall volume-leaving diameter. Protrusion breasts should enhance the functions of aggregating and supporting without any increase or decrease of the breast volume. Drooping breasts require the ability to support a large volume to stabilize the breast. Subjects were selected depending on the ratio of breast silhouette as works of art and who have large breasts in disproportional to a slender trunk. Three items, the circumferential length of breast, height of the nipple, and the depth of inner breast using the anthropomorphic measurements of 182 subjects were measured through regression equations for breast volume. Breast volume = -394.86 + 27.52 × (the circumferential length of breast) + 18.73 × (height of the nipple) + 12.85 × (the depth of inner breast). Regression equations to extract the aesthetic breast volume in measurements irrelevant to breasts using the anthropomorphic measurements of 31 subjects were as follows. Aesthetic breast volume = -611.30 + 17.67 × (bust circumference) - 24.29 × (under-bust circumference) + 16.31 × (neck point to breast point to waistline) + 22.83 × (bust breadth) + 12.22 × (waist depth) - 8.34 × (interscye- front). This prediction equation is useful to develop a breast type brassiere pattern, complement breast enhancement surgery, or minimize the effect a mastectomy.

3차원을 이용한 중년 비만 여성용 스커트 설계 방법론 연구

손부현 ( Boo Hyun Sohn ),김소영 ( So Young Kim ) 服飾文化學會 2008 服飾文化硏究 Vol.16 No.5

보문 : 20대 여대생의 체형 및 유방유형별 브래지어 착용실태조사 연구

손부현 ( Boo Hyun Sohn ),권수애 ( Soo Ae Kweon ) 한국의류학회 2012 한국의류학회지 Vol.36 No.8

We performed an assessment of wearing, purchasing, satisfaction, and the fit of brassieres according to body and breast type for college women to provide basic data on the manufacture of an ergonomic brassiere. The classifications of domed and conical breast type or projecting and conical breast type were unclear. Flat breast were dissatisfied with the shape of small and flat, and drooping breast were dissatisfied with the shape of big, projected, and drooping. In purchasing a brassiere, the majority of subjects were ignorant of their brassiere size, and over 80% of the subjects bought a brassiere without trying it on. Over 50% of those surveyed said they found it difficult to buy a well-fitted brassiere, particularly for the flat and drooping breast type. Over 70% of those surveyed wore a brassiere of 3/4 cup size, the slim body type wore a brassiere of 1/2 cup size; however, the obese body type wore a brassiere of full-cup size. The flat-breast or slim-body wore a brassiere of a thick pad type but projecting-breast or drooping breast wore brassiere of a thin pad type. Many of the subjects wore an unfitted brassiere in cup size and under bust size. In the classification of breast type, there were slight differences between the breast type that they recognized and the breast type that they were shown. There were distinctions in function, satisfaction, and fitness based on breast type. Therefore, the development of an ergonomic brassiere should considered the characteristics of breast type for fitness and comfort.

여대생의 인터넷 활용능력 및 선호도에 따른 인터넷마켓의 이용현황과 제품소개에 대한 평가

손부현(Sohn Boo-Hyun) 충북대학교 생활과학연구소 2004 생활과학연구논총 Vol.8 No.1

  This research was conducted to help on the activation of internet marketing by providing the basic data about estimation on the method of introduction in internet marketing and utilization state according to college women"s ability of application and degree of preference on internet. The subjects were 177 college women residing in Cheongju. Collected data were analyzed by frequency analysis, analysis of variance, analysis of correlation, and cross-tabulation analysis using SPSS Win 11.   The results were as follows;   1) Clothing items that purchased vis internet were casual wear, accessory, underwear, and formal wear in order.   2) The higher subjects were on degree of preference of window-shopping via internet, the frequenter purchased apparel products.   3) The ability of application on internet the more than degree of preference on purchasing effected on purchasing apparel products vis internet.   therefore, apparel industry should be put to practical use this at internet marketing strategy.

지뢰 방호화 개발에 관한 연구

손부현(Boo Hyun Sohn) 충북대학교 생활과학연구소 2008 생활과학연구논총 Vol.12 No.1

  The purpose of this study is to develope a new demining boots which has the maximum protective rate with impact absorption to the fragments of land mine.<BR>  Under the necessity for the detecting and demining work in the summit with North Korea, the wearing behaviors and problems of existing boots are figured out by investigating the wearing conditions of military personnel participated in detecting or demining work. New demining boots is designed to decrease injuring fracture based applications on dispersion and absorption of impact.

3차원을 이용한 인대의 입체 및 평면재단에 따른 길원형 패턴 비교

손부현(Boo Hyun Sohn),김소영(So Young Kim) 충북대학교 생활과학연구소 2007 생활과학연구논총 Vol.11 No.1

  Many of the apparel business and fashion educational institutes in land adopt fashion shows employing fashion models. Draping is effective tool rather than flat pattern making in the majority of the complicated design works for the fashion shows. However for the different features between the dress form and the fitting model, problems occur.<BR>  This study was performed to provide fundamental data on difference between the dress form and fitting models in flat and draping bodice pattern with three-dimensional clothing air volume and two-dimensional bodice pattern analysis. There are difference between flat and draping bodice pattern in shoulder length, shoulder angle, armhole and from bust circumference to waist circumference in back bodice pattern.

3차원의 바람직한 유방형상 구현을 위한 Semi-Atomatic Protocol 개발 및 브래지어 컵 패턴으로의 전개

손부현 ( Boo-hyun Sohn ),권수애 ( Soo-ae Kweon ) 한국패션비즈니스학회 2016 패션 비즈니스 Vol.20 No.4

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer’s size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

소비자 특성에 따른 백색도 차이 감별에 관한 연구

손부현 ( Boo Hyun Sohn ),이예진 ( Ye Jin Lee ),홍경희 ( Kyung Hi Hong ) 한국감성과학회 2004 추계학술대회 Vol.2004 No.-

염색산업에서 색차는 상당히 중요한 의미를 갖는다. 본 실험에서는 CIELAB 색차공식에 의해 측정된 표백포의 백색도 차이를 소비자들이 어떻게 인지하는가에 대해 연구하였다. Fechner Method of Constant Stimuli를 이용하여 소비자 특성에 따른 백색도 감별의 차이를 측정한 결과 색채학과 관련한 미술을 전공한 소비자는 그렇지 않은 소비자에 비해 백색도 차이에 더 민감하게 반응하였고, 성별에 따라서는 남성이 여성에 비해 더 백색도의 차이에 더 민감한 것으로 평가되었다.

3차원 인체형상 스캔데이터를 이용한 남자 바지패턴 설계

손부현 ( Boo Hyun Sohn ) 대한가정학회 2008 Family and Environment Research Vol.46 No.9

유방 확대수술 환자용 브래지어 패턴 개발

손부현,이경화,Sohn, Boo-hyun,Yi, Kyong-Hwa 한국의류학회 2017 한국의류학회지 Vol.41 No.4

This study provides basic data to develop a brassiere pattern that can cover the big breast of breast enlargement patients. In this study, we also showed areas of the brassiere cup pattern and the body surface of the breast on a breast enlargement patient. The results of the study are as follows. Correlation analysis was obtained between volume and body surface area and breast detail dimensions. After the correction process, we proposed a research bra pattern for breast augmentation patients. The cup-boundary in bra patterns of breast enlargement surgery patients is longer than the bra patterns of the general breast; therefore, the height of the inner and outer edges of the upper cups is higher. Also, it is necessary to set the new breast upper point when measuring the upper length in patients with breast augmentation surgery because the points of circumference of the breast are marked higher than chest circumference.