http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
사이즈 감소를 위한 이중대역 PIFA 안테나 설계 및 제작
임동철,박효달,Lim Dong-Cheol,Park Hyo-Dal 한국통신학회 2006 韓國通信學會論文誌 Vol.31 No.9A
본 논문에서는 $2.40{\sim}2.482GHz$ 와 $5.75{\sim}5.85GHz$ 대역의 무선 LAN용 PIFA(Planar Inverted F Antenna) 안테나를 설계 제작하였다. 패치의 사이즈 감소를 위해 hair-pin 구조와 short-pin 구조를 갖도록 하였으며, 접지면과 기판사이에 공기층을 삽입하여 VSWR<2.0에서 적절한 대역을 얻고자 하였다. 설계시 주요 파라미터는 hair-pin 길이, 폭, 위치와 공기층의 두께 및 급전위치였으며 최적화된 파라미터를 가지고 실제 제작 및 측정하였다. 제작된 안테나의 측정결과는 다음과 같다. 공진 주파수는 2.37GHz 와 5.86GHz이고, VSWR<2.0에서 각각 약 90MHz 와 350MHz의 대역폭을 얻었으며 $1.91{\sim}4.37dBi$의 이득을 얻었다. 2.4GHz에서 H-평면과 E-평면은 각각 $52.83^{\circ}$와 $85.90^{\circ}$로 나타났으며 5.8GHz에서 H-평면과 E-평면은 각각 $65.68^{\circ}$와 $52.143^{\circ}$로 나타났다. In this paper, PIFA antenna for $2.40{\sim}2.482GHz\;and\;5.75{\sim}5.85GHz$ is designed, fabricated, and measured. The prototype consist of hair-pin and short-pin. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are hair-pin length, width, position, air-gap height, and feed point position. From these parameters optimized, a PIFA antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication PIFA antenna is 2.37GHz and 5.86GHz bandwidth for approximately 90MHz with 350MHz(VSWR<2.0) and the gain is $1.91{\sim}4.37dBi$. H-plan and E-plan at 2.4GHz and 5.8GHz are shown as $52.83^{\circ},\;85.90^{\circ}\;and\;68.68^{\circ},\;52.143^{\circ}$ respectively.
순차적 정보융합을 이용한 비동기 다중 레이더 환경에서의 바이어스 추정기법
김형원,박효달,송택렬,Kim, Hyoung Won,Park, Hyo Dal,Song, Taek Lyul 한국군사과학기술학회 2012 한국군사과학기술학회지 Vol.15 No.5
This paper presents a sensor bias estimation method with serial fusion for asynchronous multisensory systems. Serial fusion processes the sensor measurements in a first-come-first-serve basis and it plays an essential role in asynchronous fusion in practice. The proposed algorithm generates the bias measurements using fusion estimates and sensor measurements for bias estimation, and compensates the sensor biases in fusion tracks. A simulation study indicates that the proposed algorithm has the superior performance in bias estimation and accurate tracking.
Q값과 2차 고조파 하모닉 억압 특성을 개선한 마이크로스트립 공진기
고민호,박효달,김천석,Go Min-Ho,Park Hyo-Dal,Kim Chun-Suk 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.9
본 논문에서는 기본 공진 주파수($f_o$)에서 단락 부하를 갖는 기존 $\lambda$/4-마이크로스트립 공진기의 Q값과 2차 직렬 공진 주파수(2$f_o$)가 천이되는 문제를 해결하여 2차 고조파 제거특성을 개선한 새로운 구조의 마이크로스트립 공진기를 제안하였으며 제안된 마이크로스트립 공진기는 마이크로웨이브 및 밀리미터 대역에서 비선형 회로들의 고조파 제거 특성을 개선하는데 적용할 수 있을 것이다. This paper describes that the Q factor of a conventional $\lambda$/4-microstrip resonator with short load can be improved and also the problem that the serial-resonant frequency(2$f_o$) should be deviated from can be settled by the proposed $\lambda$/4-microstrip resonator, which is used to suppress the harmonics of a nonlinear circuit.