P/M Fecralloy 성형체의 고온산화 및 전기저항 안정성에 미치는 SiO₂ 첨가 효과

박진우,옥진욱,정우영,박동규,안인섭,Park, Jin-Woo,Ok, Jin-Uk,Jung, Woo-young,Park, Dong-kyu,Ahn, In-Shup 한국분말야금학회 2017 한국분말재료학회지 (KPMI) Vol.24 No.4

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at $950^{\circ}C$ for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and $Al_2O_3$ upon the addition of Si oxide. Si oxides promote the formation of $Al_2O_3$ and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

탈단백 우골의 골이식 대체재로서의 특성에 대한 평가;세 종류의 골 대체재의 기본 특성에 대한 비교분석

박진우,Park, Jin-Woo 대한치주과학회 2005 Journal of Periodontal & Implant Science Vol.35 No.4

Bovine bone-derived bone substitutes are widely used for treatment of bone defects in dental and orthopedic regenerative surgery. The purpose of this study was to evaluate the basic characteristics of deproteinized bovine bone mineral as a bone graft substitute. Commercially available products from three different bovine bone minerals-Bio-Oss(GeistlichPharma, Switzerland), BBP(Oscotec. Korea), Osteograf/N-300(Dentsply Friadent Ceramed, USA) - were investigated. They were evaluated by scanning electron microscopy(SEM), energy dispersive X-ray spectrometer(EDS), surface area analysis(BET), and Kjeldahl protein analysis. Cell viability on different products was evaluated by 3-(4, 5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide(MTT) assay. The results of this study indicated that each bone substitute displayed distinct surface properties. Furthermore, Kjeldahl protein analysis indicated that residual crude proteins are present in deproteinized bovine bone mineral. BBP showed relatively large amount of residual protein, which indicated that the possibility of disease transmission can not be safely ruled out. Based on the results of this study, it is suggested that active quality management is strongly needed in operations that involve processing bovine bone tissue for medical use.

운모기판을 이용한 다결정 Si 전이막 성장 연구

박진우,엄지혜,안병태,정영권,Park Jin Woo,Eom Ji Hye,Ahn Byung Tae,Jun Young Kwon 한국재료학회 2004 한국재료학회지 Vol.14 No.5

We investigated the growth feasibility of polycrystalline Si film on mica substrate for the transfer of the layer to a plastic substrate. The annealing temperature was limited up to $600^{\circ}C$ because of crack development in the mica substrate. Amorphous Si film was deposited on mica substrate by PECVD and was crystallized by furnace annealing. During the annealing, bubbles were formed at the Si/mica interface. The bubble formation was avoided by the Ar-plasma treatment before amorphous Si deposition. A uniform and clean polycrystalline Si film was obtained by coating $NiCl_2$ on the amorphous Si film and annealing at $500^{\circ}C$ for 10 h. The conventional Si lithography was possible on the mica substrate and the devices fabricated on the substrate could be transferred to a plastic substrate.

깜짝인터뷰-부산 동주대 도서관 김연희 사서

박진우,Park Jin-U 한국도서관협회 2002 圖協會報 Vol.43 No.4

이산화티타늄-발광체 복합소재 제조 및 가시광선 광촉매 반응

박진우,김정식,Park, Jin-Woo,Kim, Jung-Sik 한국세라믹학회 2008 한국세라믹학회지 Vol.45 No.11

This paper presents a study on the photocatalytic reaction about the composite particles of $TiO_2$-coated phosphors under visible light irradiation. Nanocrystalline titanium dioxide layers were directly coated on the alkaline earth aluminate phosphor, $CaAl_2O_4:Eu^{2+},\;Nd^{3+}$ particles by an sol-gel processing method. The photocatalytic reaction was analyzed with the degradation of methylene blue (MB) aqueous solution under UV and visible light irradiations. $TiO_2$-coated phosphor powders showed different photocatalytic mechanism, compared with pure $TiO_2$ (P-25, Degussa). Under UV-irradiation, $TiO_2$-coated phosphor powders showed slow photocatalytic reactivity in the early stage and fast in the latter, compared with that of pure $TiO_2$. However, $TiO_2$-coated phosphor powders showed much faster photocatalytic reactivity than that of pure $TiO_2$ under visible irradiation. In addition, the characterizations of the $TiO_2$-coated phosphor powders were conducted by a X-ray diffractometer (XRD), transmission electron microscope (TEM), and energy dispersive spectroscopy (EDS).

PDGF-BB 적용시간이 decalcified dentin에서의 치은섬유아세포의 증식에 대한 효과

박진우,이재목,서조영,Park, Jin-Woo,Lee, Jae-Mok,Sun, Jo-Young 대한치주과학회 1996 Journal of Periodontal & Implant Science Vol.26 No.4

Platelet-derived growth factor(PDGF) is one of the polypeptide growth fators. PDGF has been reported as a biological mediator which regulates activities of wound healing process including the cell proliferation, migration and metabolism. Recent studies indicated that demineralized root surface as the primary site for growth factor application has advantages over other application method, especially due to binding capacity of growth factor for exposed matrix component of deminera1ized dentin surface. The purpose of this study is to evaluate optimal application time of PDGF-BB on proliferation of human gingival fibroblasts using deminera1ized dentin surface as primary application site. Human gingival fibroblasts and dentin slabs were prepared from the first premolar tooth extracted for the orthodontic treatment, cells were cultured in DMEM/I0% FBS at the $37^{\circ}C$, 5% CO2 incubator. All of the dentin slabs were preconditioned with Tetracycline HCI(100mg/ml) solution and rinsed in PBS. In the cell proliferation experiment, experimental group was immersed in DMEM containing 10% FBS, 50ng/rnl PDGF-BB during different time(30sec, 1, 2, 4, 8 minutes) and dried. Cells at concentration of $1{\times}10^5$cells/ml were seeded in each culture well which contained dentin slabs and incubated for 6 hours. Then, all of the dentin slabs were moved into new 24 well culture dish and incubated for 24, 48, 72 hours. The cell counting was done by hemocytometer with inverted phase contrast microscope after trypsinization. The results were as follows : The application of PDGF-BB for 1, 2 min slightly increased the number of gingival fibroblasts, and the application of PDGF-BB for 4, 8 min prominently increased the number of gingival fibroblasts. The application of PDGF-BB for 4 min showed maximum proliferation rate of gingival fibroblasts at 24, 48, 72 hours, and the application of PDGF-BB for 8 min showed less proliferation rate of gingival fibroblasts compared to the application of PDGF-BB for 4 min at 24, 48, 72 hours. In conclusion, the application of PDGF-BB for 4 min appeared to be optimal to obtain maximum proliferation of gingival fibroblasts using demineralized dentin surface as primary applicaton site of PDGF-BB.

($XiVE^{(R)}$ 임프란트의 성공률에 관한 후향적 연구;임상성적에 관한 조기평가

박진우,Park, Jin-Woo 대한치주과학회 2005 Journal of Periodontal & Implant Science Vol.35 No.1

This retrospective study evaluates the clinical performance of the recently introduced $XiVE^{(R)}$ implant(Dentsply-Friadent) with a new macro-design to improve primary stability. A total of 208 $XiVE^{(R)}$ implants (101 in the maxilla and 107 in the mandible) were placed in 71 patients. The average age of the patients was 49 years. Of the 208 implants, 190 (91.3%) were posterior implants and 82 (39.4%) were placed in compromised sites (grafted sites). Clinical and radiographic evaluation were made at second stage surgery for exposure and after functional loading. 192 implants in 64 patients were evaluated at exposure and 146 implants in 50 patients were loaded (average 170 days-loading) and evaluated after functional loading. Of 192 implants available for evaluation before loading, 3 implants failed (early failure) ; 1 before exposure, 1 at exposure and 1 during prosthetic procedure. 2 implants were in the maxilla and 1 was in the mandible. The success rate before loading was 98.4%. After functional loading, no implant failure was occurred in 146 implants evaluated during this period (100% interval success rate). This preliminary data with a new implant showed excellent success rate although the majority of implants evaluated in this study were placed in the posterior region of the jaw and compromised sites.

Histological Observations on Bone Healing with Bioactive Glass in Horizontal Ridge Augmentation;A Report of Four Cases

박진우,서조영,Park, Jin-Woo,Suh, Jo-Young The Korean Academy of Periodontoloy 2006 Journal of Periodontal & Implant Science Vol.36 No.3

임프란트 식립을 필요로 하는 환자의 수평적 치조제 결손의 증대를 위해 골유도재생술과 병용한 bioactive glass (BG) $(Biogran^{(R)})$ 이식의 골재생 양상을 각기 다른 치유기간을 부여한 4명의 환자에서 평가하였다. 6, 8, 10, 18개월의 치유기간 후 임프란트 식립부위에서 조직절편을 채득하여 골재생을 조직계측학적으로 평가하였다. 임프란트 식립을 위한 surgical reentry시 모든 이식부위는 임상적으로 명확한 수평적 치조제 폭경의 증가를 관찰할 수 있었다. 하지만 조직학적 분석결과 BG는 불량한 골전도성을 나타내었다. 6, 8개월의 치유기간후, 이식부위에서 신생골이 거의 관찰되지 않았으며(2.5%이하), 이식부와 기존 골의 경계부위에서 BG particle에 대한 신생골 성장과 결합양상 또는 관찰할 수 없었다. 10개월의 치유기간후 기존 골조직으로부터 성장한 신생골의 BG particle과의 직접적인 접촉양상을 일부 관찰할 수 있었다. 이식부는 13.2%의 광물화된 신생골조직을 보였고, 대부분의 BG particle은 결체조직으로 둘러싸여 있었다. 18개월의 치유기간이 부여된 환자의 조직절편에서 신생골은 이식부의 10.7%를 차지하여 비교적 낮은 신생골 형성양을 나타내었고, 이식부에 존재하는 잔존BG particle은 대부분은 결체조직으로, 일부분에서 광물화된 골조직으로 둘러싸여 있었다. 6, 8, 10, 18개월에서 잔존 BG particle양은 전체 이식부 면적에 대해서 각기 22.3%, 26.5%, 30.7%, 18.7%로 나타났다. 본 증례보고는 비록 한정적인 4명의 환자에서의 조직계측학적 평가결과이지만, 수평적 치조제 결손의 증대를 위해 골유도재생술과 병용한 bioactive glass이식은 불량한 골전도성으로 인해 효과적인 골재생을 위한 이식재로서는 적절하지 않을 수 있음을 나타낸다.

LVQ 자력등화를 이용한 와이브로 시스템의 성능 개선

박진우,Park, Jin-Woo 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.10

WiBro(Wireless Broadband Internet) is the standard of high-speed portable internet based on OFDMA/TDD (Orthogonal frequency division multiple access / Time division duplexing) techniques, and the subset of consolidated version of IEEE802.16e Wireless MAN standard. In this paper, we propose performance improvements of WiBro system using the LVQ(Learning Vector Quantization) blind equalization. Proposed method used the prefiltering LVQ neural network blind equalization in the Broadband WiBro system receiver. The prefiltering LVQ neural network constellates 16QAM that is transmitter data shape and the blind equalization removes ICI(Inter Carrier Interference). To verificate the proposed method usability, the MSE(Mean Square Error) and the BER(Bit Error Rate) are simulated. The simulation results shown that is improved the performances of the proposed WiBro system using the LVQ blind equalization than the existing WiBro system. 와이브로는 OFDMA/TDD 기술을 기반으로하는 고속 이동 인터넷 표준이고, IEEE802.16e 무선 MAN 표준 통합버전의 하나이다. 본 논문에서는 LVQ 자력등화를 이용한 와이브로 시스템의 성능 개선을 제안하였다. 제안한 방법은 Broadband 와이브로 시스템 수신단에 전처리 LVQ 신경망 자력등화를 사용한다. 전처리 LVQ 신경망은 송신데이터 형태인 16QAM으로 분류하고 자력등화는 ICI를 제거한다. 제안한 방법의 유용성을 확인하기 위하여 MSE와 BER에 대하여 시뮬레이션 하였으며, 시뮬레이션 결과 제안한 LVQ 자력등화를 이용한 와이브로 시스템은 기존의 와이브로 시스템보다 성능이 개선되었음을 확인하였다.

LVQ를 이용한 무선 센서 네트워크의 실내 위치 인식

박진우,정경권,엄기환,Park, Jin-Woo,Jung, Kyung-Kwon,Eom, Ki-Hwan 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.5

본 논문에서는 LVQ(Learning Vector Quantization) 네트워크를 이용한 수신 신호 세기(Received Signal Strength Indication) 기반 실내 위치인식 시스템을 제안하였다. 제안한 방식의 유용성을 확인하기 위하여 실험을 수행하였고, 일반적인 삼각측량 방법과 비교하였다. 실험실을 40개의 영역으로 나누고 6개의 고정 노드를 설치하였다. 무선 채널의 대수-정규 경로 손실 모델을 구성하고, 수신 신호 강도를 거리로 변환하였다. 변환한 정보를 LVQ의 입력으로 사용하였다. LVQ 네트워크의 학습을 위해 영역의 인덱스를 목표값으로 설정하였다. 실험을 통해서 최적의 서브클래스 개수를 결정하였고, LVQ 네트워크의 훈련을 통해서는 96%, 테스트를 통해서는 91%의 성능을 확인하였다. This paper proposed indoor location recognition method based on RSSI(received signal strength indication) using the LVQ network. In order to verify the effectiveness of the proposed method, we performed experiments, and then compared to the conventional triangularity measurement method. In the experiments, we set up the system to the laboratory, divided the 40 section, and installed 6 nodes as a reference node. We obtained the log-normal path loss model of wireless channels, RSSI converted into the distance. The distance values used as the input of LVQ. To learn the LVQ network, we set the target values as section indices. In the experiments, we determined the optimal number of subclass, and confirmed that the success rate of training phase was 96%, test phase was 91%.