http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sn-1.7Bi-0.7Cu-0.6In 솔더의 특성 연구
박지호,이희열,전지헌,전주선,정재필,Park, Ji-Ho,Lee, Hee-Yul,Jhun, Ji-Heon,Cheon, Chu-Seon,Jung, Jae-Pil 대한용접접합학회 2008 대한용접·접합학회지 Vol.26 No.5
Characteristics of Sn-1.7%Bi-0.7%Cu-0.6%In (hereafter, SBIC) lead-free solder was investigated in this study. The results from SBIC were compared to other lead-free solders such as Sn-3.5%Ag-0.7%Cu (hereafter, SAC), Sn-0.7%Cu (hereafter, SC), and lead-bearing Sn-37%Pb (hereafter, SP) alloy. Tensile properties of bulk solder, wettability, spreading index, bridge and dross were evaluated. As experimental results, tensile strength and elongation of SBIC was 62.5MPa and 21.5%, respectively. The tensile strength was comparable to that of SP solder. The wetting time of SBIC was 1.2 sec at $250^{\circ}C$, and its wetting properties including wetting force were as good as the SAC alloy. However, wettability of the SC was not so good as the SBIC and SAC. The spreading index of SBIC at $250^{\circ}C$ was 71 %, and it was similar level to those of SAC and SC solders. Bridging was not found for all solders of SBIC, SAC and SC in the range from 240 to $260^{\circ}C$. In dross test at $250^{\circ}C$ for an hour, the amount of dross produced from SBIC was about 57% compared to that from SAC.
거대세포바이러스 조기항원 단백질에 대한 단세포군 항체 제조에 관한 연구
박지호,손영모,박규현,이원영,Park, Ji Ho,Sohn, Young Mo,Park, Kyu Hyun,Lee, Won Young 대한소아감염학회 1999 Pediatric Infection and Vaccine Vol.6 No.2
목 적 : human CMV가 생성하는 분자량 72,000 dalton의 immediate early protein(p72)과 반응하는 단세포군 항체를 국내에서 분리된 CMV 야생주로 직접 제작하여 진단에 사용해 보기 위한 것이다. 방 법 : 정상 인체 섬유아세포(Foreskin 유래)를 10% 우태아혈청이 함유된 Eagle' s minimal essential medium(MEM)에서 배양하여 사용하였으며 마우스 골수종세포는 P3X63 Ag8.653(ATCC, Mary land USA)을 $5{\times}10^5/ml$ 세포수를 유지하도록 배양하였다. 사용된 항원은 선천성 CMV 감염아의 소변으로부터 검출한 CMV(KJHJ90)를 대량 증식시켜 사용하였다. 생후 6~8주된 Balb/c마우스의 복강내에 CMV 항원을 1주일 간격으로 4회 주사한 후 면역시킨 마우스 비장에서 얻은 임파구와 형질세포종세포로 최적발육기의 P3X63-Ag8.653을 사용하여 융합하였다. 융합세포를 배양한 후 간접면역형광항체법을 이용하여 항체가가 높은 것을 골랐다. 결 과 : 생산된 28종의 단세포군항체 중 그림 1과 같이 LPC12와 LPC23클론이 AD169에 감염된 세포의 핵에 특히 강하게 반응하였다. 정제된 AD169를 SDS-PAGE한 후 Western blotting을 하여 생산된 단세포군항체가 반응하는 항원의 분자량을 확인하였으며 그 중 LPC12와 LPC23클론에서 생성된 단세포군항체는 약 72KDA의 항원과 특이적으로 가장 강하게 반응하였다. 결 론 : 본 연구에서 제작된 LPC12와 LPC23 클론에서 생성된 단세포군 항체를 이용하여 선천성 CMV감염으로 확인된 소아의 소변을 이용하여 CMV AD 169 주 유래 항체(P63-27)과 비교한 DEAFF 검사상 동일한 결과를 확인한 바 LPC12와 LPC 23 클론 항체는 AD 169(P63-27)과 같이 CMV 감염의 조기진단에 사용할 수 있을 것으로 사료된다. Purpose : The purpose of this study is to make and use monoclonal Ab which reacts with CMV major immediate early(${\alpha}$) protein(p72). Methods : Normal human fibroblast(Foreskin derived) was cultured in Eagle's minimal essential medium(MEM) containing 10% cowfetus serum and mouse chondroblast was cultured in P3X63 Ag8.653(ATCC. Maryland USA) to maintain $5{\times}10^5/ml$ cell counts. CMV(KJHJ90) from congenital CMV infected infant's urine was multiplied and used for Ab making. CMV Ag was injected 4 times, 1 week interval into the peritoneal space of 6~8 weeks old mice. And then lymphocyles and fibroblasts taken from spleen were obtained and conjugated. After the conjugated cell cultured, we chose the cell that had high Ab titer using indirect immunofluerescent method. Results : Among the 28 monoclonal antibodies obtained LPC12 and LPC23 reacted highly with nucleus of AD169 infected cell. Purified AD169 after SDS-PAGE, molecular weight of Ag, which reacted with purified monoclonal Ab, was obtained using Western blotting. Monoclonal Ab of LPC12 and LPC23 clone reacted most highly with 72 kd Ag. Conclusion : LPC12 and LPC23 clonal Ab with AD 169(P63-27) is useful on early diagnosis of CMV infection.
FlexRay 네트워크 시스템을 위한 FIBEX 자동 생성 알고리즘에 관한 연구
박지호,이석,이경창,Park, Ji-Ho,Lee, Suk,Lee, Kyung-Chang 대한임베디드공학회 2013 대한임베디드공학회논문지 Vol.8 No.2
As vehicles become more intelligent for safety and convenience of drivers, in-vehicle networking systems such as controller are network (CAN) have been widely used due to increasing number of electronic control unit (ECU). Recently, FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, it is difficult for vehicle network designers to calculate platform configuration registers (PCR) and determine a base cycle or slot length of FlexRay. To assist vehicle network designers for designing FlexRay cluster, this paper presents automatic field bus exchange format (FIBEX) generation algorithm from CANdb information, which is de-facto standard database format for CAN. To design this program, structures of FIBEX, CANdb and relationship among PCR variables are analyzed.
Social Poll 시스템 환경을 위한 Today Poll 시스템의 설계 및 구현
박지호 ( Ji-ho Park ),박성욱 ( Sung-wook Park ),이선호 ( Sun-ho Lee ),이임영 ( Im-yeong Lee ) 한국정보처리학회 2011 한국정보처리학회 학술대회논문집 Vol.18 No.2
모바일 인터넷 통신망의 급속한 발전과 스마트폰 보급률이 늘어남에 따라 언제 어디서나 빠르게 인터넷에 접속할 수 있는 정보 인프라가 갖추어졌다. 더불어 이를 이용하는 사용자 간의 사회적 네트워크 소통 시스템이 최근 주목받고 있다. 하지만 단순한 메시지나 사진, 음성이나 동영상 등의 데이터를 교환하는데 그치고 있다. 이러한 시스템 환경에서는 다른 사용자의 피드백이 필요한 질문이나 설문, 투표와 같은 요청이 발생하였을 때 만족스러운 결과를 얻기까지 여러 번의 복잡한 메시지 교환이 이루어져야 한다. 본 논문에서는 이러한 불편을 해결하기 위하여 질문자의 물음에 답변하는 일반적인 설문조사 방식이 아닌 투표 할 수 있는 후보에 대한 추천을 응답자들이 직접 하는 것이 가능하도록 하는 시스템을 설계 및 구현하였다.
연약지반 압밀 촉진을 위한 초음파 에너지의 활용 (2008춘계 학술발표)
박지호(Park Ji Ho),황정하(Hwang, Jung-Ha),심성현(Shim, Seong-Hyeon),김영욱(Kim, Young-Uk) 한국산학기술학회 2008 한국산학기술학회 학술대회 Vol.- No.-
최근 우리나라는 국토면적을 넓히기 위하여 많은 지역에 준설 및 매립 공사를 수행하고 있다. 준설 및 매립공사 시 주재료로 사용되는 해성점토는 매립 초기에 매우 연약한 지반을 형성하게 된다. 이에 빠른 구조물 시공을 위하여 대상지반의 압밀을 촉진시키는 다양한 공법이 활발히 연구되고 있다. 본 연구는 새로운 압밀촉진 공법개발을 위한 기초시험으로써 초음파 에너지를 연약지반 처리에 활용하고 자 자체 고안된 초음파 발생장치를 적용하여 소규모 및 대형시험을 수행하였다. 시험에 사용된 연약 지반 점토시료는 시험조건의 일관성을 유지하기 위하여 자체개발한 원심력 시료 성형기를 사용하였다. 초음파 적용에 따른 압밀시험결과 매우 큰 압밀량의 증가를 확인할 수 있었으며 대형 시험의 경우에 도 빠른 간극수압의 소산을 확인 할 수 있었다. 연구결과 초음파가 점토의 압밀시간을 단축시키는데 효과가 크다는 것을 볼 수 있었고, 차후 초음파를 통한 다양한 압밀촉진공법이 개발될 수 있다는 가능 성을 확인 할 수 있었다.
한국 편의점 도시락 소비자의 가치구조: 수단-목적 이론의 적용
박지호 ( Ji-ho Park ),우윤혜 ( Yun-hae Woo ),김다빈 ( Da-bin Kim ),이혜영 ( Hye-young Lee ),조혜정 ( Hye-jeung Cho ) 아시아.유럽미래학회 2016 유라시아연구 Vol.13 No.3
1인 가구와 맞벌이 가정의 증가 및 편리성과 효율성을 추구하는 소비문화를 배경으로 우리나라의 가정간편식(HMR)과 유통업체브랜드(PB) 식품시장의 성장이 가속화되고 있다. 본 연구는 특히최근 빠르게 성장하고 있는 한국의 편의점 PB도시락 시장의 변화에 주목하면서 이 시장의 주요 고객층인 20대 소비자의 구매 심리에 대한 이해를 높이기 위하여 수단-목적 사슬 이론(Means-End Chain Theory)을 바탕으로 편의점 PB도시락 소비와 관련된 소비자의 가치체계, 즉 ‘제품 속성-결과-가치’의 연결 구조를 살펴보았다. 본 연구는 구조적 래더링 기법(laddering technique) 중의 하나인 APT(association pattern technique)를 이용하여 편의점 도시락을 이용하는 20대 남녀 소비자를 대상으로 설문조사를 실시하였으며 응답자 98명(남성 48명, 여성 50명)의 자료를 바탕으로 편의점 도시락 이용과 관련한 속성, 결과, 가치 관계의 함축매트릭스(implication matrix)와 가치단계도(hierarchical value map)를 도출하였다. 우선 전체 응답자를 통합하여 분석한 결과, 소비자들은 편의점 도시락 제품을 비교, 선택할 때 맛, 메뉴, 가격, 양을 중요하게 고려하는 것으로 나타났으며 이러한 속성들은 기호 반영, 호기심, 만족감, 포만감, 절약의 결과를 통해 즐거움, 자극, 편안함, 경제적 안정, 자기 주도성의 가치로 연결되고 있었다. 구체적으로는 ‘맛-기호 반영-자극’, ‘맛-기호 반영-즐거움’, ‘메뉴-기호 반영-자극’, ‘메뉴-기호 반영-즐거움’, ‘맛-만족감-편안함’, 그리고 ‘가격-절약-경제적 안정’이 중요한 래더로 발견되었다. 성별에 따른 소비자세분 집단의 가치단계도를 도출하여 비교했을 때는 남성과 여성 소비자 사이에 다음과 같은 몇 가지 공통점과 차이점이 발견되었다. 우선 ‘가격-절약-경제적 안정’의 래더는 남녀 모두의 가치단계도에서 중요한 래더 중의 하나로 나타나 편의점 PB도시락의 저렴한 가격이 주는 경제성의 장점이 남녀 소비자 모두에게 중요한 의미를 갖고 있음을 보여주었다. 그런데 이 경제성의 사슬은 여성보다 남성 소비자의 가치단계도에서 더 중요한 비중을 차지하고 있었으며, 남성의 경우 맛과 가격의 두 속성이 모두 만족감을 통해 경제적 안정의 가치로 연결되는 구조가 나타나 20대 남성 소비자에게는 맛과 가격의 측면에서 가성비가 높은 제품이 주는 경제성이 특히 중요한 소비 동기로 작용하고 있음을 보였다. 한편 여성 소비자의 가치단계도에서는 메뉴와 맛의 두 속성이 기호 반영을 통해 즐거움의 가치로 이어지는 구조가 가장 중요한 비중을 차지하고 있어 편의점 도시락의 가성비 혹은 경제성보다는 궁극적으로 즐거움을 느낄 수있도록 하는 개인의 기호가 잘 반영된 메뉴 구성과 종류, 그리고 음식의 맛이 중요하다는 것을 알 수 있었다. 그리고 남성과 여성 소비자의 가치단계도에서는 포만감과 관련된 래더 구조에서도 차이점이 발견되었는데, 남성의 경우에는 음식의 양이 포만감을 통해 편안함의 가치로 이어지는 래더를 형성한 반면여성의 경우에는 양이 아니라 도시락 제품의 맛과 메뉴 속성이 포만감으로 연결되는 구조를 보였다. 또한 남성 소비자의 가치단계도에서 나타난 ‘메뉴와 맛-호기심-자극’의 래더 구조가 여성 소비자의 가치단계도에서는 중요한 비중을 차지하지 않는 것으로 나타났다. 이와 같은 결과는 편의점 도시락을 이용하는 20대 남녀 소비자의 심층적인 소비 동기의 구조에 대한분석을 통해 소비자의 만족과 가치를 증대시킬 수 있는 효과적인 제품 개발 및 마케팅 커뮤니케이션 전략의 수립에 유용한 기초자료를 제공한다. 예를 들어, 성별에 따른 세분 시장의 차별화 전략에 있어서 남성 소비자의 경우에는 만족스러운 맛과 합리적인 가격을 통해 가성비를 높이고 충분한 음식의 양을 제공하며 호기심을 자극, 충족시킬 수 있는 새로운 맛과 메뉴를 개발하는 전략이, 여성 소비자의 경우에는 다양한 메뉴 종류 및 구성과 맛을 제공함으로써 개인의 기호성 충족을 강조하고 음식의 전체적인 양보다는 메뉴, 맛과 관련된 속성(e.g., 식재료, 조리법, 메뉴의 종류와 구성)을 통해 만족스러운 포만감을 제공할 수 있는 제품을 개발하는 것이 보다 효과적인 차별화 전략이 될 것으로 생각된다. 본 연구는 최근 급속한 성장세를 보이고 있는 한국의 편의점 도시락 시장에서 매스 마케팅(mass marketing) 전략을 추구하는 경우와 성별에 따른 세분 시장을 중심으로 타겟 마케팅(target marketing) 전략을 추구하는 경우에 상대적인 중요성이 강조되어야 할 제품 속성들을 밝히고, 동일한 속성일지라도 그것이 소비자의 인지적 동기 구조에서 연결되는 결과 및 궁극적 가치의 내용이 세분 시장에 따라 다를 수 있음을 보임으로써 소비자가 추구하는 주요 가치와 부합되는 방향으로 제품을 개발, 향상시키고 소비자의 제품 인식과 평가에 긍정적인 영향을 미칠 수 있는 커뮤니케이션 전략을 수립하는 것에 중요한 시사점을 제공한다. 끝으로, 본 연구의 몇 가지 한계점과 향후 연구의 방향을 논의한다. The purpose of this study is to discover and understand Korean young consumers` cognitive structure of product attribute-consequence-value associations concerning convenience store lunch box (dosirak) consumption. Based on the means-end chain theory and using APT survey technique, we asked 98 consumers (48 men and 50 women in their 20s) about the associations between sets of important product attributes, consequences, and life values to produce a hierarchical value map (HVM). The results revealed that the most important product attributes consumers consider in comparing and choosing convenience store lunch box meals are taste, menu, price, and amount. These important attributes were linked to pleasure, stimulation, physical and psychological comfort, financial security, and self-direction via preference, curiosity, satisfaction, satiety, and saving money. In specific, the primary ladders were ‘taste.preference-stimulation’, ‘taste.preference-pleasure’, ‘menu.preference-stimulation’, ‘menu.preference- pleasure’, ‘taste-satisfaction-comfort’, and ‘price-saving money-security’. When we developed an additional HVM for each gender group, the results further revealed a few similarities and differences between male consumers` and female consumers` value structure. First, the ladder of ‘price-saving money- financial security` appeared in both men`s and women`s HVM. This indicates that the benefit of low price is very important to them because it helps them pursue and obtain economic security. However, this economy ladder occupied a more important part in men`s HVM than in women`s. The economy ladder structure involved not only the low price attribute but also the food taste attribute suggesting that, for men, the cost(price)-to-benefit(taste) ratio is very important in choosing a dosirak and pursuing economic security. In the case of women, we found that both menu and taste were very strongly associated with personal preference which then led to pleasure. Other important differences also include ‘menu-curiosity- stimulation’, ‘taste-curiosity-stimulation’, and ‘food amount-satiety-comfort’ ladders that were found only in men`s HVM. For women, satiety was not strongly associated with the food amount. Instead, menu and taste were strongly associated with satiety, indicating that women may prefer a dosirak meal that gives a satisfactory feeling of fullness which does not come from the actual food amount but rather from ingredients, cooking methods, and the kind of taste. The results of this study help us better understand consumers` motivational structure behind their purchase of convenience store dosirak. The study also provides important managerial insights into improving current product offerings, developing new products, and designing effective marketing communication campaigns when the firms in the rapidly developing Korean convenience store dosirak market pursue a mass market strategy or a target market strategy. For example, in the male consumer segment, improving the price-quality(taste) ratio, increasing the amount of food, and developing new tastes and menu items that can stimulate consumers` curiosity would be an effective product development strategy. On the other hand, offering a large variety of menu items and tastes that can better satisfy consumers` individual preferences and developing a meal that can give a satisfactory feeling of fullness through its ingredients, cooking methods, and the kind of taste (rather than the food amount) would be an effective marketing strategy in the female consumer segment. Lastly, some limitations and implications for future research are discussed.
박지호(Park, Ji-Ho),황정하(Hwang, Jung-Ha),김영욱(Kim, Young-Uk) 한국산학기술학회 2008 한국산학기술학회논문지 Vol.9 No.4
최근 우리나라는 국토면적을 넓히기 위하여 많은 지역에 준설 및 매립 공사를 수행하고 있다. 준설 및 매립 공사에 주재료로 사용되는 해성점토는 매립 초기에 매우 연약한 지반을 형성하게 된다. 이에 빠른 구조물 시공을 위하여 대상지반의 압밀을 촉진시키는 다양한 공법이 활발히 연구되고 있다. 본 연구는 새로운 압밀촉진 공법개발을 위한 기초시험으로 초음파 에너지를 연약지반 처리에 활용하고자 자체 고안된 초음파 발생장치를 적용하여 소규모 및 대형시험을 수행하였다. 시험에 사용된 연약지반 점토시료는 시험조건의 일관성을 유지하기 위하여 자체개발한 원심력 시료 성형기를 사용하였다. 초음파 적용에 따른 압밀시험결과 매우 큰 압밀량의 증가를 확인할 수 있었으며 대형 시험의 경우에도 빠른 간극수압의 소산을 확인 할 수 있었다. 연구결과 초음파가 점토의 압밀시간을 단축시키는데 효과가 크다는 것을 볼 수 있었고, 차후 초음파를 통한 다양한 압밀촉진공법이 개발될 수 있다는 가능성을 확인 할 수 있었다. Dredged fills have been widely used to secure a land for the engineering activities. Before the useful application of the area, the soils should be consolidated to acquire the aquate shear strength. Several research projects have attempted to develop a method for accelerating the consolidation of soft clay. Our study examined the effect of ultrasonic energy on the consolidation of soft clay. Tests were conducted using specially designed and fabricated equipment that was capable of directly applying ultrasonic energy to soil samples during consolidation tests. The specimens were prepared from slurry using a centrifuge facility, and tests were conducted at various levels of ultrasonic power and treatment time. The study showed that ultrasonic energy had a considerable effect on consolidation time, suggesting that ultrasound can be used to reduce the consolidation time of soft clay.
센서 결함허용을 위한 Fuzzy 기반 Hybrid Redundancy 시스템 개발
박지호(Ji Ho Park),김만호(Man Ho Kim),이석(Suk Lee),이경창(Kyung Chang Lee) 한국자동차공학회 2011 한국자동차공학회 부문종합 학술대회 Vol.2011 No.5
The dependence of numerous systems on electronic devices is causing rapidly increasing concern over fault tolerance because of safety issues of safety critical system. As an example, a vehicle with electronics-controlled system such as x-by-wire systems, which are replacing rigid mechanical components with dynamically configurable electronic elements, should be fault tolerant because a devastating failure could arise without warning. Fault-tolerant systems have been studied in detail, mainly in the field of aeronautics. As an alternative to solve these problems, this paper presents the fuzzy based hybrid redundancy system that can remove most erroneous faults with fuzzy fault detection algorithm.