http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고속 이동체를 위한 확장성 있는 실시간 위치 측정 시스템
안시영,박준석,오하령,성영락,Ahn, Si-Young,Park, Jun-Seok,Oh, Ha-Ryoung,Seong, Yeong-Rak 한국정보처리학회 2012 정보처리학회논문지 A Vol.19 No.2
본 논문에서는 다수의 고속 이동체들의 위치를 측정할 수 있는 확장성 있는 실시간 위치 측정 시스템을 제안한다. 제안된 시스템에서는 위치 서비스가 필요한 영역을 확장 시 기본 단위인 매크로셀이라고 불리는 정사각형의 격자들로 나누고, 한 매크로셀은 $N{\times}N$ 개의 마이크로셀로 나눈다. 마이크로셀의 각 꼭짓점에는 위치 기준 노드가 중앙에는 중재 노드가 설치된다. 위치를 측정하고자 하는 이동체는 우선 중재 노드와의 통신을 통하여 위치 측정을 위한 허가를 받아야 한다. 그러므로 한 마이크로셀내에서는 오직 허가된 하나의 이동 노드만이 위치 기준 노드들과 연속적으로 통신하면서 자신의 위치를 계산할 수 있다. 제안된 시스템의 성능을 측정하기 위하여, 제안된 시스템을 모델링하고 시뮬레이션 하였다. 시뮬레이션 결과 제안된 시스템은 위치 측정을 위한 통신 시간이 짧고 고속 이동체의 위치를 계산할 경우 오차가 적은 것으로 나타났다. In this paper, a highly scalable real-time locating system which can measure location of fast moving targets is proposed. Within the system, the location service area is partitioned into grids with squares which is referred to as a macro-cell. Also, a macro-cell is further partitioned into $N{\times}N$ micro-cells. In a micro-cell, location reference nodes are placed on every vertex and an arbitration node is placed on the center. When a mobile node tries to measure its location, it should first communicate with the arbitration nodes for granting location measurement operation. Therefore, within a micro-cell, only one granted mobile node can calculate its location by a series of communication with location reference nodes. To evaluate performance of the proposed system, the system is modeled and simulated. The simulation result shows that the proposed system requires small communication time for location measurement operation and produces small location calculation error for fast moving targets.
EPC Class-1 Generation-2 규격에 적합한 RFID 리더 시스템 설계
양정규,배성우,송의석,안시영,오하령,성영락,박준석,정명섭,곽호길,Yang, Jung-Kyu,Bae, Sung-Woo,Song, Eui-Seok,Ahn, Si-Young,Oh, Ha-Ryoung,Seong, Yeong-Rak,Park, Jun-Seok,Joung, Myoung-Sub,Kwak, Ho-Kil 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.8
RFID 기술이 다양한 분야에 적용됨에 따라 각 분야의 특성에 맞게 RFID 리더에 요구되는 기능들도 다양해지고 있다. 그러나 현재 구현된 8051 프로세서를 기반으로 한 시스템은 프로세서의 처리 용량의 한계 및 메모리 크기의 제한 등으로 인하여 다양한 요구 조건들을 충족시키기에 부족하다. 본 논문에서는 다양한 요구 조건들을 충족시키기 위해서 임베디드 시스템에서 많이 사용되고 있는 ARM920T 기반의 프로세서를 이용하여 EPC Class-1 Generation-2 규격을 만족하는 UHF 대역의 RFID 시스템을 설계하였다. As RFID systems are applied to various fields and applications such as supply chain management, asset management, location based applications etc. the requirements becomes diverse. For example, Much higher performance, TCP/IP protocol stack are required in some applications. However, low end processors based systems such as 8051 processor can not meet such requirements due to their low processing capacity and limited size of memory. In this paper a UHF band RFID system which meets the EPC Class-1 Generation-2 specification with ARM920T-based processor is implemented and tested.
고속 UHF RFID 태그 검사 장비를 위한 전용 리더
배성우(Sung Woo Bae),박준석(Jun-Seok Park),성영락(Yeong Rak Seong),오하령(Ha-Ryoung Oh) 대한전기학회 2014 전기학회논문지 Vol.63 No.1
RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.
컴퓨터 시스템 및 이론 : 배터리 자동 교체형 전기버스 운영 시스템의 개념적 설계 및 시뮬레이션
김한얼 ( Han Ur Kim ),박준석 ( Jun Seok Park ),오하령 ( Ha Ryoung Oh ),성영락 ( Yeong Rak Seong ) 한국정보처리학회 2014 정보처리학회논문지. 컴퓨터 및 통신시스템 Vol.3 No.3
배터리 교체형 전기버스는 친환경 공공교통 수단이다. 그러나 기술적 한계로 인하여, 이 버스는 소모된 배터리를 충전된 배터리로 반복해서 교체해야 한다. 현재 국내에서 연구 중인 배터리 자동 교체형 전기버스는 배터리 무인 자동교체소에서 자동으로 배터리를 교체할 수 있다. 본 논문에서는 배터리 자동 교체형 전기버스 운영 시스템을 제안한다. 제안하는 시스템은 두 가지 서비스를 제공한다. 첫째, 이 시스템은 버스 도착 알림 서비스를 제공한다. 이 서비스는 기존 대도시에서 서비스 중인 버스정보시스템의 기능으로, 버스 승객들에게 버스를 얼마나 기다려야 하는지를 알려준다. 둘째, 배터리 교체 스케줄링 서비스를 제공한다. 이 서비스는 배터리 잔량이 얼마 남아있지 않거나 배터리 교체를 원하는 버스를 완충된 배터리를 저장하고 있는 배터리 무인 자동교체소로 할당하는 역할을 한다. 제안된 시스템을 검증하기 위해서 시스템을 DEVS 형식론으로 모델링하였다. 시뮬레이션 결과, 제안된 시스템은 위의 서비스들을 충실히 수행함을 알 수 있었다. The exchangeable battery electric bus is an eco-friendly public transportation vehicle. Due to the technological limitation, however, it should repeatedly change batteries with charged ones. The unmanned battery exchangeable electric bus being studied in Korea can exchange batteries automatically by using a battery swapping system. In this paper, we propose an unmanned battery exchangeable electric bus management system. The proposed system provides two services: the bus information service and the battery change scheduling service. The bus information service is the existing traditional metropolitan area bus information systems, which inform bus passengers how long they should wait for the buses. Our second service assigns a low-battery bus, which needs to change the batteries, to the battery swapping system, which stores fully-charged batteries. To validate the proposed system, we model the system by using the DEVS formalism. The simulation result shows that the proposed system provides the services properly.
ISO/IEC 18000-6 Type C 규격에 적합한 리더 펌웨어 개발
양정규 ( Jung-kyu Yang ),오하령 ( Ha-ryoung Oh ),성영락 ( Yeong-rak Seong ),박준석 ( Jun-seok Park ),송의석 ( Eui-seok Song ),정명섭 ( Myoung-sub Joung ),곽호길 ( Ho-kil Kwak ),안시영 ( Si-young Ahn ) 한국정보처리학회 2007 한국정보처리학회 학술대회논문집 Vol.14 No.1
As RFID systems are applied to various fields and applications such as supply chain management, asset management, location based applications etc. the requirements becomes diverse. For example, Much higher performance, TCP/IP protocol stack are required in some applications. However, low end processors based systems such as 8051 processor can not meet such requirements due to their low processing capacity and limited size of memory. In this paper a UHF band RFID system which meets the ISO 18000-6 TYPE C specification with ARM920T-based processor is implemented and tested.
UHF 대역 모바일 RFID 시스템용 고선형 공통 게이트 저잡음 증폭기
노형환(Hyoung-Hwan Roh),오하령(Ha-Ryoung Oh),성영락(Yeong-Rak Seong),박준석(Jun-Seok Park) 대한전자공학회 2010 대한전자공학회 학술대회 Vol.2010 No.6
A CMOS common gate LNA with high linearity over UHF mobile RFID bands is presented. A common gate configuration applied to design the proposed LNA overall leads to high linearity and wide band characteristics. Proposed LNA is fabricated with 0.35μm (one poly, four metals) CMOS manufacturing technology. The proposed LNA shows 3.2dB noise figure, 13.4dB voltage gain with 1.4dBm P1dB.
배성우(Sung Woo Bae),박준석(Jun-Seok Park),성영락(Yeong Rak Seong),오하령(Ha-Ryoung Oh) 대한전기학회 2014 전기학회논문지 Vol.63 No.1
As RFID is utilized more frequently and diversely in terms of its application areas, the application of mobile RFID technology, which integrates cellular networks and RFID, is highly anticipated. The growth and development of the RFID field has bolstered the development of mobile RFID chips to be embedded in mobile phones. Because mobile RFID chips are embedded in cell phones, limitations such as low power, small form factor, and costliness must be confronted. This study presents the design of a RFID digital baseband processor that is suitable for mobile readers. The RF analog component, which affects the baseband signals, is designed separately, in consideration of the limitations stated above. The function of the baseband processor was verified through simulations and prototyped using FPGA. The power consumption of the chip is 20mW under a 20MHz clock and the chip measures 3mm x 3mm.
이동근(Dong-Geun Lee),오종화(Jong-hwa Oh),임세미(Semi Lim),노형환(Hyoung-Hwan Roh),성영락(Yeong-Rak Seong),오하령(Ha-Ryoung Oh),박준석(Jun-Seok Park) 대한전자공학회 2010 대한전자공학회 학술대회 Vol.2010 No.6
With Green IT the current development of technology for wireless power transmission technologies have increased interest. Subsequent development of wireless power transmission technologies are also quickly conducted. In addition to the existing problems in the USN system, which has been pointed out by the battery life of the sensor reduces the efficiency of sensor nodes, the wireless power transmission technology is emerging as an alternative to improve. This paper can be applied to USN remote energy supply chain concept is proposed. For efficient operation of each module to calculate the system budget transfer / acquisition module, which was verified by experiment.
UHF 대역 RFID 리더들의 충돌을 제거하기 위한 중앙 중재 방법
배성우,류원상,안시영,양정규,김윤호,김준형,오하령,성영락,박준석,Bae, Sung-Woo,Ryu, Won-Sang,Ahn, Si-Young,Yang, Jung-Kyu,Kim, Yun-Ho,Kim, Jun-Hyung,Oh, Ha-Ryoung,Seong, Yeong-Rak,Park, Jun-Seok 한국시뮬레이션학회 2008 한국시뮬레이션학회 논문지 Vol.17 No.4
In the passive UHF (860-960MHz) RFID communications, which consists of a set of readers and tags, the readers normally interrogate the tag by using the backscatter mechanism. (i.e., tag response). In practical RFID environment, where multiple readers or tags exist; the interference causes collisions. This paper proposes a centralized arbitration scheme for avoiding the collision problems among multiple readers. The proposed centralized arbitration scheme is modeled in software environments, and is verified with simulation results. Simulated performance is focused on completion time, utilization and response time, and the simulation results show that our proposed scheme provides satisfactory performance grade. UHF 대역 수동형 RFID 시스템은 860~960 MHz 대역에서 리더와 태그가 역산란 변조 방식을 이용하여 통신한다. 따라서 다수의 리더와 태그가 동시에 존재하는 환경에서는 리더 신호 간에 간섭이 발생하고 원활한 통신이 어렵게 된다. 본 논문에서는 이러한 충돌 문제를 해결하기 위해 중재기를 사용한 중앙 중재 방법을 제안하고 제안된 방법의 성능을 평가하기 위하여 시스템을 모델링하고 시뮬레이션 하였다. 시뮬레이션은 완료시간, 이용도, 응답시간으로 평가하고, 제시한 중재 방법이 만족스러운 성능을 보임을 확인하였다.