http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단일구조 지르코니아 보철물을 이용한 심한 마모 환자의 전악 수복 증례
박준서,류재준,Park, Jun-Seo,Ryu, Jae-Jun 대한치과보철학회 2016 대한치과보철학회지 Vol.54 No.3
과도한 치아의 마모는 치수의 병적 변화, 교합 불균형과 기능 및 심미적 문제를 야기할 수 있다. 수직고경의 변화를 동반한 전악보철수복의 경우, 악관절 및 저작근의 통증이나 이상기능 등의 문제를 야기할 수 있으므로 정확한 진단 및 분석, 그리고 단계적인 치료접근이 요구된다. 본 증례는 34세 남자 환자로 전반적인 치아 마모와 부식으로 인해 기능적, 심미적 치아외형 상실을 가지고 있었다. 진단 평가결과 수직고경의 거상을 동반한 전악 보철 수복이 필요한 상태로 진단되었다. 치료계획에 의해 교합안정장치를 이용하여 턱관절을 안정화시킨 뒤 중심위를 채득하고, 거상된 수직고경 상에서 임시치아로 수복하여 경과 관찰하였다. 그 후 CAD-CAM (computer aided design-computer aided manufacturer)을 이용하여 단일구조 지르코니아를 이용한 보철 수복을 시행하였다. 최종 보철 수복 후 환자는 기능 및 형태적으로 매우 만족했으며, 더불어 심미적으로도 좋은 결과를 얻었기에 보고하는 바이다. Severe tooth wear may lead to pathological changes of pulp, imbalance in occlusion as well as functional and esthetic problems. In this case, 34-year-old male came to the hospital because of generally worn dentition due to attrition and erosion. After evaluation, a full mouth restoration with elevation of the vertical dimension of occlusion was planned. After occlusion was stabilized by an occlusal stabilization appliance, centric relation position was recorded and subsequent provisional restorations were fabricated. After evaluation, a CAD-CAM (computer aided design-computer aided manufacturing) prosthetic restoration was carried out using monolithic zirconia. After 12 months of follow up observation, the patient was satisfied with function and esthetic appearance.
돼지, 닭 및 소유래 Staphylococcus hyicus subsp. hyicus의 staphylokinase 산생능
박준서,박청규,Park, Joon-seo,Park, Cheong-kyu 대한수의학회 1997 大韓獸醫學會誌 Vol.37 No.2
Staphylococcus hyicus subsp. hyicus strains isolated from pigs, chickens and cattle were examined for the production of staphylokinase after inhibition of staphylococcal proteases by two procedures with EDTA(disodium). In one, EDTA was added to the bovine fibrin-dog plasminogen agar medium in concentration of 0.07% and paper strips soaked in 2mg/ml soy bean trypsin inhibitor were then applied on the agar plates. In the other, paper strips soaked in 5% EDTA solution were applied on the bovine fibrin-dog plasminogen agar plates and the strains to be tested were then streaked at right angles with the strip. By these procedures, staphylokinase activity was detected in 8(88.9%) of 9 strains from diseased pigs and in 57(80.3%) of 71 strains from skin of healthy pigs, but not in any strains from skin of healthy chickens and milk samples of mastitic cattle. Additionally kinase activity in 9 Staphylococcus species and subspecies isolated from bovine intramammary infections was also tested by these procedures. Staphylokinase activity was detected in 74.2% of Staph aureus strains and in 25% of Staph xylosus strains.
박준서,박장우,Park, Jun-Seo,Park, Jang-Woo 한국포장학회 1999 한국포장학회지 Vol.5 No.2
The state of compatability of poly(vinyl alcohol)(PVA) and methyl cellulose(MC), prepared by an aqueous solution casting, were investigated over the entire compositions by dynamical mechanical analyzer(DMA) and differential scanning calorimetry(DSC). The glass transition temperatures of the blends, estimated by DMA, indicate that the blends of PVA and MC showed a definite degree of partial miscibility by showing two glass transition temperatures below 80 wt % MC contents in the blends and one glass transition temperature above 80 wt % of MC contents. The DSC results show a depression of melting point and crystallization temperature of PVA in the blends containing more than 80 wt % MC. This indicates that a considerable compatibility in the blend above 80 wt % MC contents may be attribute to the presence of interaction of hydroxyl groups of component polymers through hydrogen bonding. The DMA study of the effect of plasticizer on the polymers showed that water was a good plasticizer for PVA and PEG400 for MC. The addition of water and PEG400 in the blends showed a synergic plasticizing effect on these blends, which resulted in the large extent of the improvement of the compatibility. The elongation of PVA, MC and blonds was found to increase with addition of PEG400 in the blends, but the tensile strength to decrease with addition of plasticizer.
전기자동차 화재에 따른 지하주차장 내화설계 개선 필요성 검토
김해나 ( Kim Hae-na ),박준서 ( Park Jun-seo ),신종현 ( Shin Joung-hyeon ),홍상훈 ( Hong Sang-hun ),정의인 ( Jung Ui-in ),김봉주 ( Kim Bong-joo ) 한국건축시공학회 2022 한국건축시공학회 학술발표대회 논문집 Vol.22 No.2
Electric vehicle fires in underground parking lots are very dangerous, but it is judged that the current related laws and regulations do not change, which will cause problems. As a result of the analysis for the purpose of providing an electric vehicle in an underground parking lot, fire-resistance coating is essential as it can cause an explosion in the building members made of high-strength concrete when an electric vehicle fire occurs in an underground parking lot. Since a fire occurs, it is necessary to prevent electric vehicles from parking adjacent to each other.
박준서(Jun-Seo Park),신경희(Kyoung-Hee Shin),문현주(Hyoun-Joo Moon),유재우(Chae-Woo Yoo) 한국정보과학회 1998 한국정보과학회 학술발표논문집 Vol.25 No.1A
SGML이 ISO 8879로 표준화되고, 그 응용범위가 다양해짐에 따라서 SGML문서에 해당하는 논리구조인 Document Type Definition(DTD)도 다양해지기 때문에 이에 따른 SGML 문서 편집기가 요구된다. 본 연구에서는 보통의 텍스트 지향적인 문서편집기와는 달리, SGML문서를 구조 지향적 방식으로 편집함으로서 문서구조에 대한 지식이 없는 사용자에게 주어진 DTD에 따라 쉽게 문서편집을 하도록 유도하였다. SGML 기본 단위인 태그를 DTD 구조에 따라 자동생성하고, 내부적으로 저장되어 있는 SGML 문서와 사용자가 화면을 통해서 보는 내용이 일치하며, DTD의 구조에 따라서 사용할 수 있는 태그를 선택할 수 있어야 하고, 선택된 태그를 수정할 수 있어야 한다. 본 논문에서는 위의 필수적인 기능에 따라서 SGML문서를 위한 구조지향 편집기를 설계 및 구현하였다.
PIN 다이오드를 이용한 대역 통과 여파 특성을 갖는 리미터 설계 및 실험
박준서(Jun Seo Park),김병문(Byung-Mun Kim),조영기(Young Ki Cho) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.9
본 논문에서는 레이다 시스템의 수신단의 도파관 리미터와 대역 통과 여파기를 하나의 소자로 구현하는 방법을 제시하고자 한다. 먼저 대역 통과 여파 특성을 갖는 아이리스 구조를 제안하고 PIN 다이오드를 연결하여 도파관에 입사되는 전력의 크기에 따른 PIN 다이오드 바이어스 동작 특성에 따라서 각각 여파기와 리미터로 동작하는 구조를 설계하였다. 제작된 구조는 낮은 전력의 마이크로파가 입사하는 경우, 10 ㎓에서 -0.7 ㏈의 삽입 손실을 갖는 통과 대역을 형성하는 여파기로, 높은 전력의 마이크로파가 입사하는 경우 대략 25 ㏈의 분리도를 갖는 리미터로 동작한다. In this paper, the method of design of the waveguide band-pass filter and limiter in radar system is proposed. First, we design a self-resonant iris, which can behave as a band-pass filter by mounting the PIN diode on the iris. When low power microwave is incident on the proposed element, the element behaves as a band-pass filter. Under a high power microwave condition, however, the element behaves as a limiter having wide band stop characteristics. The fabricated element has a pass band with -0.7 ㏈ insertion loss at 10 ㎓ under the low power condition and isolation about 25 ㏈ under the high power condition.