http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
CSMA/CA 기반 애드혹 네트워크에서 S-MPR을 이용한 효율적인 중계 노드 선택 알고리즘
박종호(Jongho Park),오창영(Chang-Yeong Oh),안지형(Ji Hyoung Ahn),서명환(Myunghwan Seo),조형원(Hyung-Weon Cho),이태진(Tae-Jin Lee) 한국통신학회 2012 韓國通信學會論文誌 Vol.37 No.8B
본 논문에서는 OLSR의 MPR 선택방법을 개선함으로써 애드혹(ad hoc) 네트워크의 처리율(throughput), 지연 시간(delay) 등의 성능을 향상시킬 수 있는 S-MPR 선택 방법을 제안한다. OLSR의 MPR 선택 방법은 각 노드가 독립적으로 MPR을 선택하기 때문에 대부분의 노드가 MPR로 선택되는 문제가 있다. 이러한 문제를 해결하기 위해 기존에 제안되었던 MPR 후보(candidate) 선택 방법은 MPR의 수는 감소시킬 수 있지만 그로 인해 경로의 효율성과 네트워크의 연결성(connectivity)이 저하되는 문제를 갖고 있다. 본 논문에서 제안하는 S-MPR 방법은 이러한 문제를 해결하기 위해 각 노드 입장에서 가장 중요한 노드를 S-MPR로 선택하고 나머지 MPR은 MPR 후보를 이용하여 선택하는 방법을 사용한다. 따라서 제안 방법은 경로 효율성의 저하를 최소화하면서 MPR로 선택되는 노드의 수를 줄임으로써 TC 메시지로 인한 오버헤드를 최소화하고 MPR간의 충돌을 감소시킴으로써 처리율, 지연 시간 성능을 향상시킬 수 있다. 본 논문에서 제안한 S-MPR의 성능을 알아보기 위해 OPNET을 활용하여 시뮬레이션을 수행하고 제안 S-MPR의 성능이 가장 우수함을 보인다. In the MPR selection algorithm of Optimized Link State Routing (OLSR), each node selects own MPRs independently, so most of nodes are selected to MPR at least once. To cope with this problem, the MPR candidate selection algorithm was proposed. The MPR candidate selection algorithm can reduce the number of MPRs, but the efficiencies of route and connectivity decline due to decreased number of MPRs. So, in this paper, we propose the Significant Multi-Point Relay (S-MPR) selection algorithm which can enhance the performance of ad hoc network by improving the MPR selection algorithm of OLSR. In proposed S-MPR selection algorithm, each node selects the most important node to S-MPR to guarantee the connectivity then selects remaining MPRs in MPR candidates. So proposed S-MPR selection algorithm can reduce the overhead of many MPRs without decline of routing performance. To show the performance gain of proposed S-MPR selection algorithm, we simulate the proposed S-MPR selection algorithm by using OPNET.
박종호(Jongho Park),조태영(Taeyeong Jo),김차식(Chasik Kim),문덕수(Deoksu Mun),이재천(Jaecheon LEE) 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
This study evaluated features of existing circuits through the simulation experiment of the ARS (Active Roll Stabilizer) oil pressure circuit and suggested a possibility to replace it with a new circuit. Because the exisitng anti-roll method which adopted a stabilizer bar and an active susppension system of the pressed oil type provides poor comfortness on riding and causes excessive energy loss, ARS system is becoming more frequently applied. We did a modelling for the ARS oil pressure circuit of the currently generalized HYDAC model using the AMESim program, and proceed vehicle dynamic modelling with the Matlab. When we simulated this constructed ARS oil pressure circuit system and performed a practical car test, we could achieve a similar result. In addition, we also suggested a replace circuit in which a proportional reduction valve was used in order to enhance the loalization of the HYDAC model. The simulation results proved that the newly proposed system was sufficiently comparable to the existing products.
노드 이동성 및 분포를 고려한 향상된 다중 점 릴레이 선택 알고리즘
박종호(Jongho Park),오창영(Chang-Yeong Oh),안지형(Ji Hyoung Ahn),김정식(Joung-Sik Kim),정성헌(Sunghun Jung),이태진(Tae-Jin Lee) 한국통신학회 2012 韓國通信學會論文誌 Vol.37 No.12B
본 논문에서는 노드의 이동성이 크고 노드의 밀도가 균일 하지 않은 애드혹 네트워크에서 라우팅 성능을 개선하기 위해 노드의 이동성과 밀도를 고려하여 OLSR(Optimized Link State Routing) 의 MPR(Multi-Point Relay) 선택방법을 개선할 수 있는 방법을 제안한다. OLSR의 MPR 선택 방법은 노드의 이동성과 밀도에 무관하게 2홉 이웃 노드를 많이 포함하는 노드를 위주로 선택한다. 하지만 노드가 이동성을 갖는 경우에 이동성이 큰 노드를 MPR로 선택할 경우 성능이 저하될 수 있다. 또한 노드의 밀도가 균일 하지 않은 경우에는 밀도가 높은 지역의 노드들이 우선적으로 MPR로 선택되면 네트워크 전체의 성능을 향상시킬 수 있다. 따라서 본 논문에서는 노드의 이동성과 밀도를 Hello 메시지 교환을 통해 측정하고 노드의 이동성과 밀도를 반영하여 MPR 선택에 우선순위를 부여하는 방법을 제안한다. 본 논문에서 제안한 MPR 선택 방법의 성능을 알아보기 위해 OPNET을 활용하여 시뮬레이션을 수행하고 제안 방법의 성능이 가장 우수함을 보인다. In this paper, we propose an improved MPR selection method considering mobility and density of nodes for ad-hoc networks. In Optimized Link State Routing(OLSR), a node selects 1-hop Multi-Point Relay(MPR) nodes to cover all 2-hop neighbor nodes. In a high population area, many nodes are likely to be selected as MPR nodes by their neighbors. This leads to increase in contention among MPR nodes and may decrease overall performance of the network. In addition, when an MPR node leaves the communication range of its MPR selector node, it can no longer perform as the MPR node and the performance of the network may also decrease. In this paper, we propose an MPR selection method which measures the mobility and density of nodes by exchanging the hello messages and gives the priorities to the nodes for MPR selection. Performance evaluation results using OPNET show that the proposed method is superior to OLSR or the MPR candidate method in terms of connectivity and throughput.
재구성 가능한 공연 무대를 위한 전자 마루 블럭 시스템
박종호(Jongho Park),권오흥(Ohung Kwon),정관영(Kwanyoung Joung) 한국콘텐츠학회 2011 한국콘텐츠학회논문지 Vol.11 No.12
문화 공연 분야는 과학기술의 발달과 더불어 새로운 개념의 공연 무대 장치 기술이 대두되고 있다. 이것은 무대 장치의 첨단화 및 자동화를 통해 다양한 극적 효과를 만들어 냄으로써 공연의 완성도를 높이는데 기여하고 있다. 특히, 무대 바닥의 장치 기술은 기존 고정식 무대 바닥의 단점을 극복하며 제한된 공간의 효율성 증대 및 무인화 공연을 가능하게 한다. 기존 공연에서는 부분적인 무대 바닥 변형 장치 기술이 적용되어 왔다. 본 논문에서는 무대 사용에 제한이 되었던 부분을 최소화하며 무대 연출 범위를 넓히고 다양한 극적효과를 낼 수 있는 전면 무대 바닥용 전자 마루 블록 시스템을 제안한다. 본 시스템의 전자 마루 블록은 4개의 선형 액추에이터에 의한 병렬형 구조로 상하 및 회전 동작을 수행하며, 그리고 자기장의 공진에 의한 무선 동력 전달을 수행한다. 이것은 하나의 블록으로 독립적인 공연을 가능하게 한다. 또한, 상위 통합 콘솔의 지령에 따라 블록간의 체결 및 분리가 되면서 무대 바닥 전체의 공연을 가능하게 하며, 공연의 특색에 맞는 무대 구성을 가능해서 연출 범위의 확대시킬 수 있다. In the culture performance field, device technologies for public performances with new concept is on the rise with the advancement of science. Most designers make use of the performance devices to achieve powerful and dramatic effect in their performances. It increases the perfection of performance. Most of all, applying high technology to performances stage leads to enhance the space efficiency of the limited stage as well as to enable us to run a fully unmanned performance. This paper proposes a reconstructible electric block system for public performances stage to heighten the fantastic stage effect variously.
채널 에러가 존재하는 RFID 시스템에서 효율적인 태그 추정 방법과 충돌 방지 방법
박종호(Jongho Park),이태진(Tae-Jin Lee) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
In RFID systems, a tag is easy to cause channel error. But anti-collision method in channel error condition have not been studied up to recently. In this paper, we propose an efficient estimation method and an effective tag anti-collision method in channel error condition. Simulation results show that the proposed estimation and anti-collision algorithm consumes 20-25% less time slots than the binary tree protocol and dynamic framed slotted ALOHA (DFSA) in channel error condition.