http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
평면 변형 조건에서 일축 인장력을 받는 금속 재료의 불연속 변위 각에 대한 연구
박재균,김미림,Park, Jae-Gyun,Kim, Mi-Rim 한국전산구조공학회 2011 한국전산구조공학회논문집 Vol.24 No.3
When a flat bar type metal specimen for general tension test is subject to incremental uniaxial tension, a narrow plastic shear band, so called luders band, is generated at some instance. This band typically has an angle to the axis of specimen and many early researches have been done to investigate the condition and angle of this localized deformation phenomenon by many researchers. This study follows the procedure of Thomas(1961) under plane stress boundary condition. $J_2$ plasticity theory, balance of linear momentum, and constitutive equations are used to derive the angle of luders band under plain strain boundary condition. The result was confirmed by other angle based on acoustic tensor theory. 일반적으로 인장 시험에 주로 사용되는 납작한 형태의 금속 재료에 천천히 인장력을 가하고 그 힘을 증가시키면 어느 순간에 루더스 밴드(Luders band)라고 불리는 소성 변형의 띠가 갑자기 발생한다. 이 띠들은 일정 각도를 가지고 평행하게 발생하며, 여러 연구자들에 의해 특정 경계조건에 대하여 이 띠가 발생하는 조건과 그 각도에 대한 많은 연구가 선행되어 왔다. 본 연구에서는 평면 응력 조건에서 이루어진 Thomas(1961)의 연구를 기반으로 하고 $J_2$ 소성 변형 조건, 힘의 평형방정식, 그리고 구성방정식을 이용하여 평면 변형 조건에서 발생하는 밴드의 각도를 해석적으로 유도하였다. 이 결과는 음향텐서를 이용한 기존의 연구 결과와 일치함을 확인하였다.
박재균,Park Jae-gyun 한국전산구조공학회 2005 한국전산구조공학회논문집 Vol.18 No.4
본 논문은 연속체역학에서의 탄소성모델을 그대로 재현할 수 있는 미소구조모델에 관해서 연구하였다. 물체를 일정크기를 지닌 입자와 그 입자들을 연결하는 선형 스프링으로 모델링한 Doublet Mechanics를 기본이론으로 하여 이를 소성 영역으로 확장하였다. 그 결과로 가장 단순한 가정을 하였을 경우 미소모델과 연속체모델이 정확히 일대일 대응을 하는 것을 보였다. 2차원 평면응력문제에 대한 예제를 통해 미소변형률과 미소응력을 계산하였고 그 결과로 거동에 대해 분석하여 이 모델의 유효성을 입증하였다. This study deals with elasto-plasticity of granular micro-structures which recovers continuum elasto-plasticity in its counterpart. The theory is based on doublet mechanics that assumes particles of finite size and connecting linear springs, and it makes extensions to plasticity. The result shows that the micro model has one to one relationship with the continuum model in the simplest case. Micro-strain and micro-stress of two dimensional plane stress problem were calculated, which shows the behavior of the specimen and verifies the effectiveness of this model.
박재균,안일찬,Park, Jae-Gyun,An, Il-Chan 한국전산구조공학회 2007 한국전산구조공학회논문집 Vol.20 No.5
건설 분야에서는 신소재인 FRP(fiber reinforced polymer) 복합재료는 그 경량성과 고강도로 점차 그 사용영역이 넓어지고 있다. 본 연구에서는 이러한 FRP 소재의 성능을 평가하기 위하여 제2 진도대교를 원형(prototype)으로 하는 3차원 선형 모델링을 하였고 케이블 및 거더에 복합소재를 적용하여 해석하였다. 해석 결과는 Steel 케이블 및 보강형을 사용한 경우와 비교를 통하여 분석하였고 정적해석 및 모드해석을 수행하였다. 정적해석에서는 각 부재의 최대 응력 및 중앙 지점의 최대 처짐을 비교하였다. 사하중 감소 때문에 복합소재를 사용한 경우 상판의 처짐이 감소하는 것을 확인하였으며, 케이블의 단면을 감소시켜 해석함으로써 그 결과를 다시 보였다. 단면 감소, 모드해석에서는 진동수 비를 통해 Flutter의 발생 풍속을 비교하였다. As an emerging materials in construction fields, FRP(fiber reinforced polymer) has been used in many area of civil engineering for its light weight and high strength. In this study we chose the 2nd Jindo-Bridge as a prototype, and evaluate effect of replacing steel components to FRP components through simplified 3D linear analysis. Static and modal analysis are done and the analysis results are compared with steel case analysis. From the static analysis results, the maximum stress of each component and maximum displacement of middle span are compared. Due to the reduction of deadload, the FRP structure causes less deflection than the original steel structure and from the reduced section (cable) analysis we confirmed the previous result. The occurrence wind velocity of flutter is compared by the frequency ratio.