http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
체계 개발 단계별 기계 부품에 대한 신뢰도 예측 시 NSWC-98-LE1 적용 방안
권기상,박은심,조차현,이동우,이수중,Kwon, Ki Sang,Park, Eun Sim,Cho, Cha Hyun,Lee, Dong Woo,Lee, Su Jung 한국시스템엔지니어링학회 2008 시스템엔지니어링학술지 Vol.4 No.1
Generally, in analysis of reliability of Design and Development Phase, reliability of electrical components is analyzed based on standards such as MIL-HDBK-217F, Bellcore Issue 4,5,6 by analyzing stress of architectural side (Power, Voltage, Current and quality level of components) of weapon system and stress of operational side (operational environment, operational temperature, Operational Profile). But the reliability of mechanical components is analyzed based on the data book of failure history of mechanical parts called NPRD-95(Nonelectronic Parts Reliability Data-95) without any analysis of above stress. However, even if it's the same mechanical parts, it might have different failure rate(fatigue, wear, corrosion) during operation depending on how weary(stress : pressure, vibration, temperature during operation) the parts are. Therefore, analyzing reliability using just data book can cause big difference in reliability instead of analyzing based upon stressfulness that parts might have, operational concept, and other various factors. Thus, This paper will guide the way of predicting reliability by organizing ways of predicting reliability for system organization and adopt ing NSWC-98/LE1(Naval Surface Warfare Center-98/LE1) for mechanical components.
무기체계 정비성 향상을 위한 BIT 설계 및 검증 방안
허완욱,박은심,윤정환,Heo, Wan-Ok,Park, Eun-Shim,Yoon, Jung-Hwan 한국군사과학기술학회 2012 한국군사과학기술학회지 Vol.15 No.2
Built-In-Test is a design feature in more and more advanced weapon system. During development test and evaluation(DT&E) it is critical that the BIT system be evaluated. The BIT system is an integral part of the weapon system and subsystem. Built-In-Test assists in conducting on system and subsystem failure detection and isolation to the Line Replaceable Unit(LRU). This capability reduces the need for highly skilled personnel and special test equipment at organizational level, and reduces maintenance down-time of system by shortening Total Corrective Maintenance Time. During DT&E of weapon system the objective of BIT system evaluation is to determine BIT capabilities achieved and to identify deficiencies in the BIT system. As a result corrective actions are implemented while the system is still in development. Through the use of the reiterative BIT evaluation the BIT system design was corrected, improved, or updated, as the BIT system matured.
예측방법론 기반 연속형 계획 모델을 적용한 무기체계의 신뢰도 성장 계획
서양우(Yangwoo Seo),박은심(Eunshim Park),김용국(Youngkuk Kim),이관영(Kwanyoung Lee),김명수(Myungsoo Kim) 한국신뢰성학회 2018 신뢰성응용연구 Vol.18 No.3
Purpose: To develop the reliability growth planning for a subsystem of guided weapon system using PM2-Continuous model. Methods: The target MTBF of the subsystem is set by allocating the system target MTBF to the lower level, where ARINC method is applied. Other model parameters such as initial MTBF, management strategy ratio and average fix effectiveness factor are chosen from historical growth parameter estimates. Given the values of model parameters, the reliability growth planning curve using PM2-Continuous model is constructed and the sensitivity analyses are performed for the changes of model parameters. Results: We have developed the reliability growth plan for a subsystem of guided weapon system using PM2-Continuous model. It was found that the smaller the ratio of initial MTBF to target MTBF, the smaller the management strategy ratio, the smaller the average fix effectiveness factor, and the shorter the development test period, the higher reliability growth is required. Conclusion: The result of this study will be used as a basis for establishing the reliability growth plan, the test period setting and the budget appropriation for the similar system entering the system development stage in the future.
암 병동 간호사의 죽음에 대한 인식, 죽음불안, 임종 환자간호 태도
홍은미(Hong, Eunmi),전미덕(Jun, Meeduk),박은심(Park, Eun Shim),류은정(Ryu, Eunjung) 대한종양간호학회 2013 Asian Oncology Nursing Vol.13 No.4
Purpose: This study aimed to identify the relationships among death perceptions, death anxiety, and terminal care attitudes of nurses in oncology unit and to explore the predictors affecting their attitudes toward terminal care in Korea. Methods: A sample of 94 nurses was recruited from oncology units at one university hospital and a national medical center in Korea. The subjects completed a demographic questionnaire, the View of Life and Death Scale, the Fear of Death Scale the Korean version, and the Attitudes toward Nursing Care of the Dying Scale. Results: The subjects" terminal care attitudes were significantly positively influenced by death concern, perception of positive meanings of death, and experiences with the death of a family member or acquaintance in the last year. Those influential variables explained 21.5% of their terminal care attitudes. Conclusion: Findings of this study suggest that developing continuing education programs that teach effective coping strategies to prevent death anxiety and identifying barriers that can make caring for dying patients difficult may make a significant positive increase in the nurses’ attitudes toward care of the dying. In addition, the provision of effective palliative care in oncology settings remains open to review through further research and development.
이관영(Lee, Kwan-Young),김상문(Kim, Sang-Moon),박은심(Park, Eun-Shim),박재은(Park, Jae-Eun),김근형(Kim, Geun-Hyung) 한국산학기술학회 2014 한국산학기술학회논문지 Vol.15 No.9
무기체계에서의 소프트웨어에 대한 비중이 커짐에 따라, 소프트웨어 ILS(Integrated Logistics Support)에 대한 관심 이 커지고 있다. 그러나 기존 무기체계에서 ILS 개발은 하드웨어 중심으로 적용하고 있어 소프트웨어에 그대로 적용하기 힘든 실정이다. 본 논문은 소프트웨어 ILS의 실무 적용 어려움이 무엇인지 원인을 파악하고 문제점을 분석하기 위해 국내/외 규정 및 사례들을 통해 현 실태를 파악하였다. 또한, 소프트웨어의 유지보수 특성을 고려하여 소프트웨어와 하드웨어 ILS의 차이점을 검토하고, 소프트웨어 ILS 요소개발 범위 설정을 통해 국내에 적용이 가능한 소프트웨어 ILS 개발방안을 제안하였 다. 이는 소프트웨어 ILS 개발을 위한 구체적인 실무 적용방안을 수립하는 데 도움이 될 것으로 기대한다. The increasing importance of software has highlighted the need for the proper application of software ILS. On the other hand, the development of ILS has been somewhat limited to the area of hardware development. Therefore, this study examined the potential difficulties in applying software ILS to practical uses, and analyzed the drawbacks by reporting several domestic or foreign regulation cases. In addition, the differences between hardware and software ILS were examined by considering their characteristics of maintenance. Eventually, by establishing the proper range, this study proposes a development plan that is suitable for domestic weapon systems. The proposed research is expected to be helpful for offering specific plans for designing software ILS.