RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        광대역 잡음의 전역 감쇠를 위한 에너지 밀도 제어

        박영철,윤정현,윤대희,차일환,Park, Young-Cheol,Yun, Jeong-Hyeon,Youn, Dae-Hee,Cha, Il-Whan 한국음향학회 1996 韓國音響學會誌 Vol.15 No.2

        본 논문에서는 일차원 밀폐함 내의 광대역 소음을 제어하기 위한 에너지 밀도(energy density)제어 알고리듬의 성능을 평가한다. 주파수 영역에서 최적 능동 소음 제어 필터를 설계할 경우 종종 시간 영역에서 물리적으로 실현할 수 없는 결과를 얻게 된다. 이런 문제를 피하기 위해 본 논문에서는 시간 영역에서 문제를 해석한다. 이러한 접근 방법은 항상 물리적으로 실현 가능한 최적 제어기를 얻을 수 있게 해준다. 능동 소음 제어 시스템의 성능을 예측하기 위해 실시간 모의 실험 결과로부터 음압을 최소화 하는 것보다 에너지 밀도를 최소화 하는 것이 광대역 소음의 전역적인 감쇠(global attenuation)에 있어서 향상된 결과를 얻을 수 있음을 확인할 수 있다. 또한 특정 지점에서, 검출된 에너지 밀도를 최소화할 경우 밀폐함 내에 있는 위치 에너지를 최소화하는 방법에서 얻을 수 있는 결과와 유사한 정도의 소음 전역 감쇠를 얻을 수 있었다. 그리고 음압 자승 제어 방법과는 달리 에너지 밀도 제어 방법은 일차원 음장에서 사용하는 경우 오차 센서의 위치에 영향을 받지 않음을 알 수 있다. 본 논문은 또한 에너지 밀도 제어 알고리듬의 실제 구현시에 일반적으로 사용되는 두 개의 센서를 사용하는 구현 기술을 살펴보고, 이 기술이 큰 성능 저하 없이 에너지 밀도 제어 알고리듬을 구현할 수 있음을 보인다. The performance of the energy density control algorithm for controlling a broadband noise is evaluated in a one-dimensional enclosure. To avoid noncausality problem of a control filter, which often happens in a frequency domain optimization, analyses presented in this paper are undertaken in the time domain. This approach provides the form of the causally constrained optimal controller. Numerical results are presented to predict the performance of the active noise control system, and indicate that imp개ved global attenuation of the broadband noise can be achieved by minimizing the energy density, rather than the squared pressure. It is shown that minimizing the energy density at a single location yields global attenuation results that are comparable to minimizing the potential energy. Furthermore, unlike the squared pressure control, the energy density control does not demonstrate any dependence on the error sensor location for this one-dimensional field. A practical implementation of the energy-based control algorithm is presented. Results show that the energy density control can be implemented using the two sensor technique with a tolerable margin of performance degradation.

      • SCOPUSKCI등재

        배기매니폴드 직접부착 촉매장치의 배기 유동특성

        박영철,이창식,Park, Young-Cheol,Lee, Chang-Sik 대한기계학회 2003 大韓機械學會論文集B Vol.27 No.7

        The exhaust gas flow in the inlet collector of close coupled catalyst(CCC) adapted to the exhaust manifold is very complex flow because the exhaust gas is a pulsation flow with several port flow. The distribution of gas flow and temperature in inlet collector effect to the efficiency of catalytic converter. In this study, it measures temperatures on several point in inlet collector with two kind of inlet collector volume. And it analyzes with CFD to exhaust manifold and close coupled catalyst for temperature and flow. Comparing to measured and analyzed result, it find increasing of collector volume effects to catalyst temperature distribution and uniformity of catalytic converter

      • KCI등재

        건설적 발언의 선행요인들과 경로모형의 탐색

        박영철(Young-Cheol Park),김도근(Do-Geun Kim) 인문사회과학기술융합학회 2019 예술인문사회융합멀티미디어논문지 Vol.9 No.5

        본 연구는 조직후원인식, 심리적 주인의식, 그리고 동료지향 시민행동을 조직 구성원의 건설적 발언행위의 선행요인으로 설정하고 이 변인들의 효과경로에 대한 모형을 탐색하고자 하였다. 이를 위하여 조직후원인식과 건설적 발언의 관계에서 심리적 주인의식과 동료지향 시민행동이 매개변수로 작용하는 이중매개모형 혹은 다중매개모형을 연구모형과 4개의 대안모형으로 설정하고, 모형들 간의 적합도 비교를 통해 최종모형을 선택하고, 최종모형을 대상으로 하여 경로분석을 수행하였다. 연구자료는 2018년 5월 영남지역 중소기업 종사자로부터 회수한 유효 설문지 375개를 대상으로 하였으며, SPSS v. 22.0과 AMOS v. 24.0 등 통계프로그램을 사용하여 검정하였다. 구조모형의 분석은 측정모형과 구조모형을 구분하여 순차적으로 적합도를 평가하는 2단계 접근법을 따랐다. 연구결과, 대안모형 4가 최종모형으로 선정되었고, 최종모형의 경로분석에서 조직후원인식->주인의식->동료지향 시민행동->건설적 발언의 간접효과와 조직후원인식->건설적 발언의 직접효과가 확인되었다. The purpose of this study was to examine the multiple mediation effect of psychological ownership and organizational citizenship behavior-individual(OCBI) in the relationship between perceived organizational support(POS) and constructive voices. The analysis model was finally selected by comparing the research model with alternative models in the criterion of model fit. Data was collected from 375 workers of SMEs in YeongNam area. For statistical analysis SPSS v. 22.0 & AMOS v. 24 were used. In comparison of model fitness alternative model 4 was selected. According to analysis of final model, the results demonstrated the dual mediation effect of psychological ownership and OCBI in the relationship between POS and constructive voices. Additionally direct effect of POS to constructive voices was demonstrated. This study offers a theoretical framework to understand the structural cause-and-effect relationship among POS, psychological ownership, OCBI, and constructive voices.

      • KCI등재

        수산 관련 시계열 자료를 이용한 통계학적 분석에서의 자기상관에 대한 고찰

        박영철(Young Cheol Park),히야마요시아끼(Yoshiaki Hiyama) 한국수산과학회 2002 한국수산과학회지 Vol.35 No.3

        시계열자료가 가진 자기상관은 추정된 상관관계를 왜곡시키는 요인들 중의 하나로 작용한다. 회귀모형의 잔차항에 자기상관이 있는 지를 검정하기 위해 Durbin-Watson 통계량이 흔히 쓰인다. 잔차항에 자기상관을 가친 회귀모형의 효율성을 향상시키기 위해 Yule-Walker 법, 비선형최소제곱법, 최우추정법 및 사전백색화법이 사용되어 왔다. 본 연구는 자기상관으로 인한 상관관계의 왜곡을 방지하기 위한 이들 방법들에 대해 고찰하였다. 사전백색화법을 제외한 앞의 3가지 방법을 20년간의 실제 시계열 자료에 적용하였으며 몬테카롤로법을 이용하여 각 방법의 오차변이를 조사하였다. 각 방법의 평균잔차제곱분포의 경우, 최우추정법으로 추정된 평균잔차제곱이 가장 작았으며 분포 범위도 가장 작았으나 각 추정방법 사이에 유의한 차이가 발견되지는 않았다. Autocorrelation in time series data can affect statistical inference in correlation or regression analyses. To improve a regression model from which the residuals are autocorrelated, Yule-Walker method, nonlinear least squares estimation, maximum likelihood method and `prewhitening` method have been used to estimate the parameters in a regression equation. This study reviewed on the estimation methods of preventing spurious correlation in the presence of autocorrelation and applied the former three methods, Yule-Walker, nonlinear least squares and maximum likelihood method, to a 20-year real data set Monte carlo simulation was used to compare the three parameter estimation methods. However, the simulation results showed that the mean squared error distributions from the three methods simulated do not differ significantly.

      • KCI등재

        보문: 미립지공학·유동층·기후변화대응기술·연료전환기술 ; 상용모사기를 이용한 로토석탄의 분할유동층 가스화기 가스화 특성 모사

        박영철 ( Young Cheol Park ),문종호 ( Jong Ho Moon ),이승용 ( Seung Yong Lee ),이동호 ( Dong Ho Lee ),진경태 ( Gyoung Tae Jin ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.3

        본 연구에서는 상용모사기를 이용하여 분할유동층 가스화기에서 로토석탄의 가스화 특성 모사를 수행하였다. 분할 유동층 가스화기는 가스화영역에서 일어나는 연소반응과 가스화반응(발열반응과 흡열반응)을 각각 다른 영역에서 일어날 수 있도록 반응기 내부를 분할한 가스화기이다. 분할유동층 가스화기의 주요 개념은 가스화에 요구되는 열을 연 소영역에서 생성된 열을 이용하여 공급하는 것으로 가스화기 내부에서의 부분 연소를 억제하고, 격벽을 통한 열전달 과 열매체의 이동을 통해 공급하는 것이다. 분할유동층 가스화기 모델은 열분해, 촤 가스화, 타르/오일 가스화, 촤 연 소반응으로 4개의 영역을 가지도록 구현하였다. 열분해의 경우, 대상 석탄을 반응온도, 반응가스, 석탄주입량을 변화시 켜 실험을 수행하여 실험데이터로부터 correlation 모델을 작성하였다. 가스화는 Gibbs free energy를 최소화하는 모델을 이용하고 촤 연소영역은 combustion 모델을 이용하였다. 분할유동층 가스화기 모사결과를 비교하기 위해 우선 단일영역 가스화기 모사를 수행하였다. 단일영역 가스화기의 경우 석탄열분해 반응기와 석탄가스화 반응기 두 개로 구 성되며 반응모델은 분할유동층 가스화기와 일치한다. 분할유동층 가스화기 모사 결과, 냉가스효율은 84.4%로 단일영 역 가스화기와 유사한 결과를 얻었으며 합성가스의 조성은 H2와 CH4이 다소 증가하고 CO와 CO2가 다소 감소한 것을 확인하였다. 모델 검증을 위해 10건의 단일영역 가스화 실험에 대하여 모사를 수행하였다. 모사를 통해 얻어진 합 성가스의 조성은 CO, CO2, CH4의 경우 실험결과와 모사결과가 거의 일치하는 반면 H2의 경우 모사결과가 실험값과 비교하여 다소 높은 값을 갖는 것을 확인하였으나 경향은 실험값과 유사함을 확인하였다. 탄소전환율의 경우, 모델결 과가 실험값과 비교하여 높은 전환율을 보이는 것을 알 수 있으며 이는 모사에 사용된 가스화 모델이 평형반응기로 반 응기에서의 체류시간과 접촉시간이 실제 실험과 차이가 있기 때문으로 파악된다. In this study, we used a commercial simulator to investigate the gasification characteristics of Roto coal in the partitioned fluidized-bed gasifier, which consists of 4 parts such as coal pyrolysis, char gasification, tar/oil gasification and char combustion. The heating medium was exchanged between the combustion part and the gasification part in order to supply the energy needed for pyrolysis and gasification. The correlation model from experimental data in relation to the reaction temperatures, the reaction gases and the coal feed rates was derived for the coal pyrolysis. The equilibrium model was used for the gasification and the combustion model for the char combustion. In order to compare the reaction behavior of the partitioned fluidized-bed gasifier, the single-bed gasifier was also simulated. The cold gas efficiency of both partitioned fluidized-bed gasifier and single-bed gasifier was almost the same. The H2 and CH4 contents of the syngas in the partitioned fluidized-bed gasifier slightly increased and the CO and CO2 contents slightly decreased, compared with the singlebed gasifier. In order to verify the model, ten cases of the single-bed gasification experiment have been simulated. The contents of CO, CO2, CH4 in the syngas from the simulation corresponded with the experimental data while those of H2 was slightly higher than experimental data, but the tendency of H2 content in the syngas was similar to the experiments. In the coal conversion, the simulation results were higher than the experiments since equilibrium model was used for the gasification so that the residence time and contact time in the model is different from the experiments.

      • SCOPUSKCI등재

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼