http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박근보,박영근,최재순,김수일,Park Keun-Bo,Park Young-Geun,Choi Jae-Soon,Kim Soo-Il Korean Geotechnical Society 2004 한국지반공학회논문집 Vol.20 No.7
기존의 액상화 평가법은 대부분 미국, 일본, 그리고 유럽과 같이 지진 발생빈도가 높고 그로 인한 액상화 피해가 빈번한 국가에서 주도적으로 연구되어왔다. 이런 지역적 특성을 토대로 개발된 액상화 평가방법들은 높은 지진규모(M=7.5)에 바탕을 두고 있다. 국내의 경우, 1997년 실제적인 내진 연구가 시작된 이래 액상화 평가의 구체적 규정은 항만시설의 내진설계 표준서(1999)에 언급된 바 있으나 이는 문헌연구를 통해 제시된 것으로 실제적이지 못하다. 그러므로, 국내 적합한 설계기준을 작성하기 위해서는 지진피해자료의 부족을 국내 지반을 대상으로 한 동적실내시험을 통하는 것이 바람직하며, 일반적인 정현하중 진동시험 보다 실제 지진하중 재하 시험이 훨씬 효과적일 수 있다. 본 연구에서는 실제 지진파 고유의 특성을 적용한 진동삼축 시험을 통하여 상대밀도와 세립분함유량의 변화에 따른 액상화 저항강도를 산정하였다. 실험결과를 국내의 대표적인 항만지역의 지진응답 해석 결과와 비교 분석하고 중진지역에 적합한 액상화 평가의 생략기준을 제시하였다. 또한 실제 지진하중 삼축실험 결과를 이용하여 국내 여건에 적합한 지진규모 보정계수를 제안하였다. Conventional methods for the assessment of liquefaction potential were primarily for areas of severe earthquake zones (M=7.5) such as North America and Japan. Detailed earthquake related researches in Korea started in 1997, including development of the seismic design standards for port and harbour structures, which was later completed in 1999. Because most contents in the guidelines were quoted through literature reviews from North America and Japan, which are located in strong earthquake region, those are not proper in Korea, a moderate earthquake region. This requires further improvement of the present guidelines. Considering earthquake hazard data in Korea, use of laboratory tests based on irregular earthquake motion appears to be effective to reflect the dynamic characteristics of soil more realistically than those using simplified regular loading. In this study, cyclic triaxial tests using irregular earthquake motions are performed with different earthquake magnitudes, relative densities, and fines contents. Assessment of liquefaction potential in moderate earthquake regions is discussed based on various laboratory test results. Effects of these components on dynamic behavior of soils are discussed as well. From the test results, screening limits and magnitude scaling factors to determine the soil liquefaction resistance strength in seismic design were re-investigated and proposed using normalized maximum stress ratios under real irregular earthquake motions.
극지환경을 고려한 남극 세종과학기지 계측시스템 적용성에 관한 연구
박근보(Keunbo Park),김영석(YoungSeok Kim) 한국지반신소재학회 2013 한국지반신소재학회 논문집 Vol.12 No.2
극한환경에서의 구조물 거동을 파악하기 위하여 남극 세종과학기지 부근의 기상환경을 분석(1988년-2007년 및 2010년)하고, 이에 적합한 상용화된 계측기를 선정하여 남극기지(생물해양연구동)에 설치하여 검토하였다. 남극 세종과학기지 기상환경 분석결과, -25.6℃ 이하의 온도 및 49.5m/s정도의 바람에도 견딜 수 있는 계측기를 설치해야 하며 설치위치도 지표면에서 225.0cm 이상이어야 한다. 또한, 남극에서 사용할 계측기 센서의 경우 온도, 폭설 및 강풍에 민감하고, 기상환경 이외에 남극의 동물이 침범할 수 있으므로 계측기 및 계측기용 데이터로거를 보호할 수 있는 시스템을 개발하여 적용하였다. 새롭게 개발된 보호시스템은 극한환경에서도 설치가 용이하고 경제적이다. 1년간의 계측결과를 바탕으로 보호시스템의 극지 적용가능성을 검토하였으며, 구조물 거동도 예측이 가능함을 확인하였다. Environmental monitoring analysis were analyzed for the period from 1988 to 2007 near King Sejong Station. Extreme environment structure behaviors(Marine Biology Lab.) were evaluated using monitoring sensors developed commercial sensors. Also when installing the sensors ambient environment of the King Sejong Station, to analyze the measured data and the comparative behavior of the structure were analyzed. As a environmental monitoring analysis result at King Sejong Station temperature, sensors were installed to withstand about -25.6℃ or less and 49.5m/s. They were needed that the height of 225.0cm or more to be installed during the installation. For several monitoring sensors used in Antarctic, temperature, snow and strong winds were very sensitive to the atmospheric environment. Quite often a camouflage(animals and humans) would make it necessary to provide housing for monitoring sensors. Therefore, protection system developed for these sensors were to protect the sensors and data logger. Protection system the newly developed, is economical, easy to install even in harsh environments. Based on the measurement result of the one year, consider electrode applicability of the protection system, it was confirmed that the behavior of the structure is also predictable.
박근보(Keunbo Park),김영석(YoungSeok Kim) 한국지반신소재학회 2014 한국지반신소재학회 논문집 Vol.13 No.2
본 연구에서는 남극 장보고기지 부근에서 채취한 시료를 활용하여 동하중에 대한 액상화 저항특성을 파악하기 위하여 반복삼축시험을 실시하였다. 또한 기존문헌과의 비교를 통하여 남극에서 퇴적된 지반의 동적거동을 규명하였다. 시험결과 동일한 압밀응력비에 대한 반복회수와 축변형률 5%를 발생시키는데 필요한 반복응력비와의 관계는 모든 시료에서 초기액상화를 발생시킬 수 있는 반복응력비가 증가할수록 반복회수가 감소하였다. 세립분 함유량이 10%로 증가할수록 액상화 저항강도가 감소하다가 다시 증가하는 경향을 나타내었다. 점착력과 액상화 저항강도와의 관계는 세립분 함유량과 액상화 저항강도와의 관계와 같이 점착력이 증가할수록 액상화 저항강도도 감소하지만 어느 시점 이후에는 반복응력비가 증가하는 경향을 보였다. 또한, 마찰각과 평균입경이 증가할수록 반복응력비가 증가하는 경향을 나타내었다. In this study, in order to take advantage of samples collected in the Jangbogo station, and to grasp the liquefaction resistance characteristics of the dynamic load was performed cyclic triaxial test. Also, through the comparison with the existing literature. The test results, for the relationship between number of cycles for the same cyclic shear stress ratio and the cyclic shear stress ratio to produce an axial strain of 5%, in all samples, the cyclic shear stress ratio to liquefaction for the specimen, which has been liquefied, was increased, whereas number of cycles were reduced. The cyclic shear stress ratio of samples first decrease up to the fine content of about 10%. After this strength level, there is a little increase in cyclic shear stress ratio with increasing fine content. In addition, the cyclic shear stress ratio between cohesive strength, mean particle size, and friction angle decrease but some time later, there was a tendency that cyclic shear stress ratio is a little increased.
아스팔트층 온도 비선형성을 고려한 사용자 편의환경의 다층탄성 프로그램 개발
최준성,서주원,박근보,김수일,Choi, Jun-Seong,Seo, Joo-Won,Park, Keun-Bo,Kim, Soo-Il 한국도로학회 2008 한국도로학회논문집 Vol.10 No.4
본 연구에서는 기본설계용 다층탄성이론을 이용한 역학적 거동해석 프로그램을 개발하였고, 현장에서 간편하게 사용될 수 있도록 Visual Basic 프로그래밍을 사용한 사용자 편의의 전 후 처리기법을 도입하여 본 연구에서 개발된 다층탄성해석 프로그램을 패키지화하였다. 패키지화한 상용프로그램에 아스팔트층의 깊이별 온도변화에 따른 영향과 보조기층, 노상과 같은 비구속층에서의 응력비선형성을 고려하여 아스팔트 포장구조해석모형을 개발하였다. 또한 개발된 해석과정을 이용하여 시험도로 실제 초기 현장계측자료의 현장검증을 실시하였다. A multi layered elastic analysis program, IDYSPAP, was developed. The objective of this study was to develop the IDYSPAP program on Graphic User Interface environment for field engineers using Visual Basic, which was considered span of multi-wheels and maximum 4 axles using superposition of linear elastic theorem. It is suggested that this study considers algorithm with dynamic properties of asphalt layer on various temperature and non-linear properties of subbase and subgrade on stress non-linearity for asphalt pavement structure. This Program was modified to divide asphalt layer automatically according to layer division concept. The developed program was verified with initial measuring data in test road sections of KEC (Korea Expressway Co.) using laboratory test results.