http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
분전함에서 이상발열 감지를 위한 광온도센서의 동작특성 분석
문현욱(Hyun-Wook Moon),김동우(Dong-Woo Kim),길형준(Hyung-Jun Gil),김동욱(Dong-Ook Kim),이기연(Ki-Yeon Lee),김향곤(Hyang-Kon Kim) 한국조명·전기설비학회 2009 조명·전기설비학회논문지 Vol.23 No.10
본 논문에서는 전기설비의 전기적 접속부 또는 전기배선 등에서 발생하는 이상발열을 감지하는 방법에 대해 알아보고, 분전함에서의 발열상태를 실시간으로 모니터링하는 전력설비 진단시스템에 사용되고 있는 광온도센서에 대하여 동작특성을 실험, 분석하였다. 광온도센서의 동작특성 실험을 위한 열원으로는 Black Body와 Hot Plate를 사용하였으며 각각에서의 열원의 온도변화에 따른 광온도센서 출력전압값을 측정, 분석하였다. 그리고 분전함내 차단기 단자에서의 체결불량으로 인한 이상발열 감지 실험을 기존의 발열 감지방법인 열전대와 적외선 열화상장치를 이용하여 실시하였고, 광온도센서를 이용해 실시하여 결과를 비교 분석하였다. 실험결과, 광온도센서의 이상발열 감지능력이 유사함을 확인할 수 있었다. 이러한 분석 결과는 향후 RFID형 광온도센서를 이용한 전력설비 진단시스템의 현장 적용에 있어 기본 자료가 될 것으로 기대된다. In this study, methods of overheat detection at the coupling or wire in electrical facility are investigated, operating characteristic about the optic temperature sensor for continuous on-line temperature monitoring in diagnostics system of electrical facility is analyzed. Heating sources in the experiment for operating characteristics of optic temperature sensor use black body and hot plate, output voltage of optic temperature sensor in accordance with temperature variation is analyzed. Overheat generation due to poor contact at the circuit breaker in panel board detects using a thermocouple, infrared thermal camera and optic temperature sensor, and experiment results are analyzed. The effect of optic temperature sensor is the same that of other methods. These results expect to use basic research material for adjusting field of electrical diagnostics system using RFID type optic temperature sensor in the near future.
유비쿼터스형 온도감시를 이용한 분전함의 화재예방에 관한 연구
문현욱(Hyun-Wook Moon),이기연(Ki-Yeon Lee),김동욱(Dong-Ook Kim),김향곤(Hyang-Gon Kim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
본 논문에서는 전력설비 분전함의 전기적 접속부에서 발생하는 온도상태를 광온도센서와 무선통신을 이용하여 실시간으로 모니터링하는 온도감시 시스템의 동작특성을 실험 및 분석하였다. 광온도센서의 동작특성 실험을 위해 열원을 이용해 광온도센서의 출력전압값을 측정하였고 분전함내 전기적 접속부에서의 체결불량으로 인한 이상발열감지실험결과를 분석하였다. 이러한 결과는 분전함의 화재예방을 위한 광온도센서와 무선통신을 이용한 유비쿼터스형 온도감시 시스템의 현장적용에 기본 자료가 될 것으로 기대된다.
레이더에서 고고도 표적물의 고도 예측 성능 향상을 위한 한국형 지수 모델 개발에 관한 연구
문현욱(Hyunwook Moon),전민현(Min-Hyun Jeon),김우중(WooJoong Kim),오성근(Seong Keun Oh),이종현(Jong Hyun Lee),권세웅(Sewoong Kwon),윤영중(Young Joong Yoon) 한국전자파학회 2012 한국전자파학회논문지 Vol.23 No.7
본 논문에서는 레이더 이용 시 대기 굴절에 의한 고고도 표적물의 고도 오차를 최소화하기 위한 한국형 지수모델을 제안하였다. 이를 위해 한국 7개 기상 관측소에서 6년간 측정된 데이터를 바탕으로 표면 굴절도(surface refractivity)와 굴절도 감쇄율(refractivity gradient) 간의 상관 관계를 최소 자승법을 이용하여 도출하고, 이를 지수모델에 적용하였다. 또한, 제안된 모델의 검증을 위해 표준 대기(standard atmosphere) 모델, CRPL(Central Radio Propagation Lab.) 지수 모델, 제안된 한국형 지수 모델에 대한 고도 오차를 광선 추적법을 이용하여 도출하고, 그 특성을 분석하였다. 그 결과, 표준 대기 모델에 비해서는 50~60 %, CRPL 지수 모델에 비해서는 약 60 % 수준의 고도 오차를 나타내 제안된 모델을 적용 시 레이더의 고도 예측 성능을 향상시킬 수 있음을 확인하였다. In this paper, an exponential model of Korea is proposed to minimize an altitude-error of high-altitude target due to atmosphere refraction at radar system. The relation between surface refractivity and refractivity gradient, which is extracted using the least square fit from the measured data at 7 weather stations, is applied to the exponential model. And in order to verify the proposed model, the altitude-errors for a standard atmosphere, a CRPL(Central Radio Propagation Lab.) exponential model, the proposed model are extracted and analyzed using a ray tracing. As a result, the proposed model can improve the altitude estimation performance of radar compared to conventional atmosphere refractive index models.
문현욱(Hyun-Wook Moon),최은정(Eun-Jung Choi),이종현(Jonghyun Lee),염재명(Jaemeung Yeum),권세웅(Sewoong Kwon),홍성민(Sungmin Hong),조성기(Sungki Cho),박장현(Jang-Hyun Park),조중현(Jung Hyun Jo) 한국전자파학회 2018 한국전자파학회논문지 Vol.29 No.8
본 논문에서는 우주감시레이다에 대한 지구 대기권 영향을 분석하기 위해 대기 굴절에 의한 고도 오차 및 주파수별 전리층 시간 지연에 의한 거리 오차를 레이다 고각에 따라 도출하였다. 이를 위해 국내 기상관측소 측정 데이터를 이용하여 지역별/계절별 특성을 고려한 전파 굴절도 프로파일을 모델링하고, 광선추적법을 이용하여 전파 굴절에 의한 고도오차를 도출했으며, 주파수에 따른 전리층 거리 오차를 도출하였다. 또한, 해외 우주감시레이다 및 국내 제안된 우주감시레이다를 토대로 레이다 오차 특성에 따른 레이다 설계 고려사항에 대해 알아보았다. 따라서 이러한 지구 대기권에 의한 우주감시레이다 오차 특성 분석은 향후 우주감시레이다 설계 시 레이다 위치, 레이다 조향 범위 및 주파수 선정에 활용될 수 있을 것으로 기대된다. In this study, both the altitude error due to the refraction and the range error due to the delay in the ionosphere with respect to the frequency are extracted according to the radar elevation to analyze the effect of atmosphere on the space surveillance radar. To achieve this, the radio refractivity profile is modeled using the measured data from domestic weather stations. Then, the altitude-error due to the refraction is extracted using the ray tracing method, and the range error in the ionosphere is extracted according to the frequency. Further, considerations for radar design with respect to the radar error characteristics are discussed based on the abroad space surveillance radar and proposed domestic space surveillance radar. This analysis of the error characteristics is expected to be utilized for the determination of radar location, range of steering, and frequency in the space surveillance radar design.