http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
류장렬(Jang-Ryeol Ryu) 한국정보기술학회 2016 Proceedings of KIIT Conference Vol.2016 No.6
LED는 저 전력, 긴 수명, 고 휘도, 빠른 응답, 친환경적인 특성의 장점을 갖고 있는데, LED가 여러 분야에 사용되기 위하여 LED 칩(chip)의 고효율화와 더불어 복사 조도와 배광분포가 우수해야 한다. 본 연구에서는 산업재의 제조공정에서 도포공정을 할 때, 접착제 내의 형광 물질을 통하여 접착재의 평탄성, 균일성 등을 검사하는 UV LED 검사기기의 기구를 설계하였다. LEDs are using widely in field of illumination, lighting source of medical instrument, LCD LED backlight, mobile and traffic signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. Also, In order to make a high efficiency, it must superior in light distribution and intensity of illumination. Especially, in order to apply the adhesive in manufacture process of industrial products using UV LED illuminator, it must have the flatness and uniformity of bond through a fluorescent material in the adhesive. In this paper, we have reported that UV LED illuminator with UV wavelength, that is, 315 ~ 400nm could get the system design of optimal UV wavelength.
류장렬(Ryu Jang-ryeol) 한국국제회계학회 2008 국제회계연구 Vol.0 No.23
부동산 조세정책은 경제발전에 따른 경제규모와 도시인구의 증가로 부동산 수요가 확대되면서 시작되었다. 특히 부동산 조세정책은 부동산 기능과 수요목적을 고려하여 유연하게 시 행할 필요성이 있으나 건설경기부양과 연계하여 단기적인 시행경향을 보이고 있다. 이에 본 연구는 부동산과 관련된 조세정책 시행상의 문제점을 제시하고 그 개선방안을 다음과 같이 제언한다. 첫째, 부동산 취득단계의 조세정책은 납세편의를 위해 취득세와 등록세를 일원화 시키고, 실지거래가액을 기준으로 과세하는 것이다. 또한 세율은 감면정책보다 세율인하를 통한 부동산 거래 활성화를 유도하는 것이 유용할 것이다. 둘째, 부동산 보유단계의 조세정책은 부동산 투기억제정책을 지나치게 강조할 것이 아니 라 잠재적 보유자를 고려한 정책개선이 필요하다. 부동산 보유단계에서는 동일한 과세대상에 대한 이원적 과세 및 과세기관 문제가 발생함으로써 종합부동산세를 재산세로 일원화할 것을 제언한다. 또한 부동산 보유단계에서 공시지가 상승은 도시근로자의 조세부담을 가중 시키고, 투자자에게 투자대상의 견인차 역할을 할 수 있음을 간과할 때 공시지가 상승을 억제하는 정책적 입안이 필요하다. 셋째, 부동산 앙도단계의 조세정책은 실거래가액기준 과세로 조세부담이 증가하고 있는 점을 고려한다면 주거목적의 장기 주택보유자에게는 비과세 및 장기보유특별공제를 확대 적용할 필요성이 있다. 보동산은 부동산이 갖는 고유특성을 고려한다면 현행 경기부양 조절정책과 병행한 단기정책은 부동산 동결효과를 가져오는 문제점이 나타나고 있어 중ㆍ장기적인 정책시행이 필요하다. 즉 부동산 특성을 고려한 중ㆍ장기적 정책 수립으로 반복 시행되는 부동산 조세정책개선에 일조하기를 기대한다. This study analyzes the problems and suggests improvement of legislation for the tax policy of real estate acquisition step, of real estate holding step, and of real estate transfer income(capital gains) step. The real estate tax policy has need of medium and long term for successful tax policy. The problems in legislation of real estate tax policy are followings. Firstly, The real estate policy of acquisition step would take legislative improve to acquisition tax and registration tax. also to cut a tax rate down of transfer tax. Secondly, The real estate policy of holding step has problems for double taxation of property tax and comprehensive real estate tax. So, We need to abolish the comprehensive real estate tax. Thirdly, For the tax policy of real estate transfer step, Considering the fact that real estate transfer income tax is calculate by actual transaction price which is higher than the past taxation burden rate These results effectively that the reporting is working effective for new real estate tax policy.
고 효율 LED를 이용한 LCD 패널 구동회로의 설계 및 제작
류장렬(Ryu, Jang-Ryeol) 한국산학기술학회 2012 한국산학기술학회논문지 Vol.13 No.7
LED가 의료장비용 LCD 패널의 광원으로 사용되는 경우, 밝기, 휘도 균일성, 고출력, 백색의 조절 능력, 온도 등을 고려한 우수한 광학 기구의 설계 및 제작이 필요하다. 본 논문에서는 휘도 및 균일도, dimming 범위의 증대, 잡음 발생 억제 등에서 측면발광 방식의 45인치 의료기기 등의 LED 후면광 시스템 및 구동회로를 설계하고 그 시제품을 제작하였다. 시제품의 휘도, dimming 범위, flicker 잡음, black level, 온도 특성 등을 측정한 결과, 휘 도의 범위는 3,000 ~ 25,000[cd/㎡], 색 좌표는 x 좌표 0.3144, y좌표 0.3076의 평균값을 보였으며, 온도 특성은 휘 도가 20,000[cd/㎡]이상의 제어에서 냉각 시스템이 필요한 것으로 나타났다. 한편, dimming의 범위는 27.0[cd/㎡] ~ 515[cd/㎡], flicker noise는 80kHz에서 발생하지 않았고, black level 0.7[cd/㎡]~0.1 [cd/㎡]를 얻어 의료기기 등의 LCD 패널에 적용할 수 있을 것으로 판단되었다. For using them as a optical source of inspections equipment for LCD panel, the design of excellent backlight system, brightness uniformity and high power and good protection against heat is essential. In this paper, backlight system which is built in the 45 inch side emitting LCD backlight by LED array structure and driving circuit were designed and developed. After that, their performances were measured. It showed the luminance from 3,000 to 25,000[cd/㎡], the mean value x:0.3144, y:0.3076 of x-y chromaticity, dimming range of 27~515[cd/㎡], free flicker noise in the 80kHz and black level of 0.7~0.1[cd/㎡], thermal test of cooling system in 20,000[cd/㎡] over values.
류장렬(Ryu, Jang-Ryeol) 한국산학기술학회 2012 한국산학기술학회논문지 Vol.13 No.1
LED는 저 전력, 긴 수명, 고 휘도, 빠른 응답, 친환경적인 특성의 여러 장점을 갖고 있기 때문에 청색과 녹색 LED는 교통신호, 옥외 디스플레이, 백색 LED는 LCD 후면광 등의 응용 제품에 사용되고 있다. 여기서 LED 의 성능을 향상하기 위하여 출력전력과 소자의 신뢰성을 높이고, 동작전압을 낮추어야 LED 칩의 고효율화가 이루 어져야 하는데, 이는 에피택셜층, 표면요철, 패턴이 있는 사파이어 기판, 칩 설계의 최적화, 특수 공정의 개선 등의 기술이 우수해야 한다. 본 연구에서는 측면 에칭 기술과 절연층 삽입기술을 이용하여 사파이어 에피 웨이퍼 위에 GaN-기반 백색 LED 칩을 제작하여 그 성능을 조사하였다. LED 칩의 성능을 개선하기 위한 최적화 설계와 CBL(current blocking layer) 삽입 기술의 개선된 공정을 통하여 LED 칩 성능의 향상을 확인할 수 있었으며, 출력 전력은 광 출력 7cd, 순방향 인가전압 3.2V의 값을 얻었다. 현재의 LCD 후면광원으로 사용되고 있는 LED 칩의 출력에 비하여 성능이 개선되었으며, 의료기기 및 LCD LED TV의 후면광원으로 사용할 수 있을 것으로 기대된다. LEDs are using widely in a field of illumination, LCD LED backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. To achieve high performance LEDs, one needs to enhance output power, reduce operation voltage, and improve device reliability. In this paper, we have proposed that the optimum design and specialized process could improve the performance of LED chip. It was showed an output power of 7cd and input supplied voltage of 3.2V by the insertion technique of current blocking layer. In this paper, GaN-based LED chip which is built on the sapphire epi-wafer by selective MOCVD were designed and developed. After that, their performances were measured. It showed the output power of 7cd more than conventional GaN-based chip. It will be used the lighting source of a medical equipment and LCD LED TV with GaN-based LED chip.