http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양동혁(Yang Dong-Hyuk),도양회(Doh Yang-Hoi),좌정우(Jwa Jeong-Woo),김호찬(Kim Ho-Chan),부창진(Boo Chang-Jin),고성택(Ko Sung-Taek) 한국콘텐츠학회 2006 한국콘텐츠학회 종합학술대회 논문집 Vol.4 No.2
문자메시지는 이동통신망에서 무선 데이터 서비스를 위해 가장 널리 사용되는 서비스이다. CDMA 이동통신망에서는 문자메시지 서비스는 한번에 50자의 한글을 전송할 수 있다. 문자메시지 서비스가 일반화되고 MIDI, MP3 등의 멀티미디어 기능을 갖는 칼라 휴대폰이 보급됨에 따라 이동통신사업자는 멀티미디어 메시지를 문자메시지와 같이 P2P로 전송할 수 있는 MMS(Multimedia Massage Service)를 표준화하고 서비스하고 있다. MMS는 문자메시지와 같이 이동통신사업자의 비음성 서비스의 주요 매출 원으로 역할을 할 것으로 기대되고 있다. MMS가 활성화되면 MMS에 첨부되는 멀티미디어 콘텐츠의 저작권을 보호하기 위한 방안이 마련되어야 할 것이다. 본 논문에서는 MMS 시스템의 변경을 최소화하면서 콘텐츠 저작권 보호를 위한 DRM이 적용된 MMS DRM 시스템을 제안한다. 제안된 MMS DRM 시스템은 DRM Packager, DRM Server, DRM Agent를 통하여 MMS에 첨부된 멀티미디어 콘텐츠를 보호하고 다양한 사업모델을 지원할 수 있도록 하여 MMS 활성화에 기여할 것이다. Short message service (SMS) is a popular mobile data service in cellular networks. One SMS message can carry 50 Korean alphabets. Cellular operators standard and develop multimedia message service (MMS) based on P2P as color phones having multimedia solutions such as MIDI, MP3, JPG, PNG, and MPEG have been developed. MMS can be a key cash flow in the non-voice mobile revenue together with SMS. Copyrights protection of contents in a MMS message can be issued as MMS can be the popular P2P service such as MMS. In this paper, we propose MMS DRM system to protect copyrights of contents in MMS with the minimum change of MMS system. The proposed MMS DRM system protect copyrights of contents using DRM Packager, DRM Server, and DRM Agent and support various use cases to activates MMS in mobile networks.
최경현(Kyung-Hyun Choi),도양회(Yang-Hoe Doh),김형찬(Hyung-Chan Kim),김동수(Dong-Soo Kim) 한국기계가공학회 2006 한국기계가공학회 춘추계학술대회 논문집 Vol.2006 No.-
In solid freeform fabrication system (SFFS), the fabrication process mainly consists of four steps; heating powder, filling nitrogen gas, stacking sliced layers, and cooling a chamber. Among these steps, the time required for staking layers depends on a scan path generation method. When a scan path is in-line stitching type, the number of jumps will increase because of convex or concave segments of the loops and inner loops of each layer. Consequently, the scanning time is taken longer due to unnecessary jumps. To enhance fabrication time, the unnecessary jumps must be removed as many as possible. In this paper, a regional scan method has suggested by dividing specific regions at each layer. An optimal scan path will be s generated by rearranging the in-line stitching scan path after dividing each layer according to the minimal number of jumps.
가변 빔익스팬더 기반의 최적 주사경로 생성 알고리즘 개발
최경현(Kyung-Hyun Choi),김형찬(Hyung-Chan Kim),도양회(Yang-Hoi Doh),김동수(Dong-Soo Kim) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.10
In Solid Freeform Fabrication System (SFFS), the reduction of total processing time is very important specifically for SLS process that is sintered using heat energy. When the time delay occurs in the process, shrinkage, warpage and curling occur by a heat energy distribution difference and effect the accuracy and the system efficiency. Therefore, the reduction of total processing time is an important issue in SFF system. A digital mirror system (DMS) is a system which scans the laser beam with different spot size. The spot size is selected based on the slicing section to decrease and accuracy of the process time and improve the processing efficiency. In this study, the optimal scan path generation for DMS will be addressed, and this development will improve the whole processing efficiency and accuracy through the scan efficiency by considering the existing scan path algorithm and heat energy distribution.
당현우(H. W. Dang),아시프(M. A. Ali Rehmani),도양회(Y. H. Doh),김동수(D. S. Kim),최경현(K. h. Choi) 한국동력기계공학회 2009 한국동력기계공학회 학술대회 논문집 Vol.2009 No.6
Electrospray has immense application in non-contact coating of thin films on substrate such as in the fabrication of conductive layer for solar cells, surface treatment and in various applications. In this study a laboratory fabricated metal capillary nozzle head has been fabricated for electrospray application. The experimental observation of the laboratory fabricated nozzle shows that the uniform spray can be obtained by adjusting the appropriate flowrate, distance between the spray nozzle and counter nozzle and spray enhancer spring which is adjusted just above the metallic nozzle exit. Uniform line widths of 1mm were also achieved by traversing the substrate below the spray nozzle head under 10kV voltage. This study will help in classify the conditions the parameters which are responsible for electrospray and provides the insight for the future researches.
웹 이송제어 기반의 롤투롤 시스템을 위한 ESD 프린팅 시스템 개발
최경현(Kyung-hyun Choi),양봉수(Bong-su Yang),탄충탄(Tran Trung Thanh),도양회(Yang-hoi Doh),김동수(Dong-su Kim) 한국기계가공학회 2009 한국기계가공학회 춘추계학술대회 논문집 Vol.2009 No.6월
R2R (Roll to Roll) ESD (Electro-static Deposition) system is known as a flexible manufacturing system with many applications. Flexible electronics devices can be made by using ESD printing element technology for mass-production with flexible substrate and conductive ink. Through development of R2R ESD (R2R hybrid) system, R2R ESD takes advantages of low cost, time consumption and high precision. And it is good for manufacturing RFID, solar cell, flexible display etc. This paper proposes a design of ESD printing system and development plan for R2R hybrid system of web transfer control base.
A Study of Stable Meniscus formation using Glass Capillary for ESDPrinting system
최경현(K. H. Choi),아산라만(A. Rahman),양봉수(B. S. Yang),도양회(Y. H. Doh),김동수(D. S. Kim) 한국동력기계공학회 2009 한국동력기계공학회 학술대회 논문집 Vol.2009 No.6
micro fabrication lithography process의 복잡한 과정을 포함하지 않는 프린팅 소재의 표면에 대한 다이렉트 패터닝에 대한 연구 가 지속적으로 진행이 되고 있다. 이러한 ink-jet printing을 사용하는 Direct Fabrication Process는 Micro electronics와 같은 nanotechnology research와 그 응용분야에 효과적으로 사용될 수 있다. 정전식 잉크젯 시스템은 RFBD, electronics device 그리고 유연디스플레이, 태양전지, 센서등 Printed electronics 기술을 포함하는 저비용의 다양한 응용기술을 포함하여 큰 효용성을 지니고 있다. 본 실험을 위해 integrated형 electrostatic inkjet nozzle head를 가공하고 ink meniscus에 고전압을 주기위해, Nozzle Head의 내부에 electrode가 삽입된다. 충전된 meniscus와 ground electrode사이의 차이는 ink의 특성, surface tension, viscosity 와 metallic pigments의 양 에 달려있다. 게다가 잉크방울(Droplets)의 토출을 위해서 지름 1mm의 ring type ground terminal을 nozzle의 끝에서 Ground 사이의 거리를 500um로 고정하여 설치한다. 본 논문은 다른 파라메터를 통한 다른 형태의 메니스커스의 형상과 잉크방울이 떨어지기전 메니스커스가 커지는 현상에 대한 실험을 통하여 진행하였다. 또한 이번 실험과 논문을 통하여 Integrated형 nozzle head의 분석에 도움이 될것으로 보고 있다.