http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중 도메인명을 지원하는 URL 전달 서버의 설계 및 구현
노상호(Sang-Ho Noh),장세현(Se-Hyun Jang),김상연(Sang-Yon Kim),양희재(Heejea Yang) 한국정보과학회 2000 한국정보과학회 학술발표논문집 Vol.27 No.1A
본 연구에서는 인터넷상에 존재하는 웹 사이트를 새로운 도메인 네임으로 연결시켜주는 URL forwarding 서버를 설계 및 구현하였다. URL forwarding 서버는 수많은 인터넷 사용자들의 웹 사이트를 간단하고 다양한 형태의 URL로 매핑 시켜준다. URL forwarding 서버는 HTTP 프로토콜에서 redirection 응답코드를 기반으로 구현되었으며 Linux 시스템에서 실험을 하였다. 본 논문에서는 HTTP와 forwarding 서버를 서로 비교 분석하여 고찰해보고 구현된 forwarding 서버의 동작에 대해서 알아본다.
자동차 Instrument Panel PSM 성형 개선을 위한 TPO/TPU Power 물성 향상 연구
곽성복(sung Bok Kwak),윤여성(Yeo Seong Yoon),노상호(Sang Ho Noh) 한국자동차공학회 2002 한국자동차공학회 춘 추계 학술대회 논문집 Vol.2002 No.5_3
The PSM (powder Slush Molding) which is applied to the PVC in automobile has environmental problems and molding problems. such as disappearance of embo and occurrance of deep drawing. Because of the problems, TPO/TPU is applied to improve the environment in the advanced company. In nation, the materials are on development. In this study, separating of the size of TPO/TPU, and used compatibilizer is enhanced the interface adhesion to improve the molding and durability. It confirms the best molding condition including the data through TPO/TPU Powder analyzer(Thennal analysis, IR, SEM etc). The first step of the study is a selection of the powder size and the second is the mixing with compatibilizer. Finally, the molding is achieved as PSM in the lab. The mixing which is well achieved by raw material and compatibilizer, the molding condition confirms the improved material properties (heat-resistance, light-resistance etc.).<br/> Even though there are still lots of problems to be solved to develop TPO/TPU Powder, it will make the expansion of applications due to the environmental properties of TPO/TPU.
플라즈마 처리된 폴리이써설폰 막의 CO<sub>2</sub>/N<sub>2</sub> 혼합가스의 투과거동에 대한 연구
박희진,노상호,배성렬,문세기,Park, Hee-Jin,Noh, Sang-Ho,Bae, Seong-Youl,Moon, Sei-Ki 한국화학공학회 2002 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.40 No.6
폴리이써설폰 막(polyethersulfone membrane, PES)을 Ar, $NH_3$ 플라즈마로 표면 처리하고, 처리 전후의 변화를 관찰하였다. Ar 플라즈마로 처리하였을 때 O/C의 비율이 증가하며 친수성기의 도입이 확인되었고 $NH_3$ 플라즈마로 처리하였을 때 아민, 아미노기가 도입되었다. 또한 폴리이써설폰 막의 흡습성이 유지될 경우, 플라즈마 처리에 의해 표면에 형성된 극성 작용기들과 $CO_2$와의 내부반응이 증가하였다. 이로 인해 $N_2$에 비하여 $CO_2$의 용해 선택성이 증가하였고 투과도와 선택도가 동시에 향상되는 효과를 나타내었다. 플라즈마 처리된 폴리이써설폰 막에서 $CO_2$의 투과도와 ${\gamma}$(actual separation factor)에 대한 최적조건은 Ar 플라즈마 처리의 경우 10 W-2 min에서 각각 $13.19{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$와 20.12이며, $NH_3$ 플라즈마 처리의 경우 50 W-2 min에서 $15.40{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$와 20.06를 얻었다. The surface of polyethersulfone(PES) membrane treated by Ar, $NH_3$ plasma, and the effects were observed before and after the treatment. The membrane treated by Ar plasma was increased the O/C ratio and measured the hydrophilic group, and the one by $NH_3$ plasma was attached the amine group and the amino group. In addition, with the wettability of polyethersulfone membrane $CO_2$ and the polar functional groups of surface interacted increasingly. Thus by comparable increase of the soluble selectivity $CO_2$ to $N_2$ both the permeability and the selectivity of $CO_2$ was improved. The optimum condition for the $CO_2$ permeation and actual separation factor of the plasma treated membrane was as follows; the measurement of Ar-10 W-2 min plasma treatment was $13.19{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$ and 20.12, and the measurement of $NH_3$-50 W-2 min plasma treatment was $15.40{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$ and 20.06.
진공사출금형용 STS316L 금속 다공체 제조 및 기계적 특성
김세훈,김상민,노상호,김진평,신재혁,성시영,진광진,김태안,Kim, Se Hoon,Kim, Sang Min,Noh, Sang Ho,Kim, Jin Pyeong,Shin, Jae Hyuck,Sung, Si-Young,Jin, Jin Kwang,Kim, Taean 한국분말야금학회 2015 한국분말재료학회지 (KPMI) Vol.22 No.3
In this study, porous stainless steel (STS316L) sintered body was fabricated by powder metallurgy method and its properties such as porosity, compressive yield strength, hardness, and permeability were evaluated. 67.5Fe-17Cr- 13Ni-2.5Mo (wt%) powder was produced by a water atomization. The atomized powder was classified into size with under $45{\mu}m$ and over $180{\mu}m$, and then they were compacted with various pressures and sintered at $1210^{\circ}C$ for 1 h in a vacuum atmosphere. The porosities of sintered bodies could be obtained in range of 20~53% by controlling the compaction pressure. Compressive yield strength and hardness were achieved up to 268 MPa and 94 Shore D, respectively. Air permeability was obtained up to $79l/min{\cdot}cm^2$. As a result, mechanical properties and air permeability of the optimized porous body having a porosity of 25~40% were very superior to that of Al alloy.
비 조영증강 전산화단층촬영 검사시 관전압 변화에 따른 요산석과 비요산석의 HU변화에 관한 연구
정명진(Myung Jin Jung),노상호(Sang Ho Noh),문창운(Chang Woon Moon),노지숙(Ji Sook Noh),김성길(Sung Kil Kim) 대한CT영상기술학회 2014 대한CT영상기술학회지 Vol.16 No.2
서 론 : 요로결석의 성분에 대한 정보는 효과적인 치료방법을 결정하는데 있어 중요한 역할을 하며, 요로결석의 분쇄정도(fragility)를 예측 가능하게 한다. 이에 본 저자는 요로결석의 HU값 측정시 관전압에 따른 요산석과 비요산석의 HU값 변화에 대해 알아보고자 한다. 대상 및 방법 : 작은 플라스틱 병(Plastic Bottle) 안에 요로결석을 삽인 후 인체와 비슷한 돈육을 이용하여 실험팬텀을 제작하였다. 640-Slice MSCT(Auquilion ONE, Toshiba Medical Center, Japan)의 Volume scan 방식을 이용하여 촬영하였고, 얻어진 영상에서 각 관전압에 따른 요로결석의 HU값을 측정하였다. 수집된 자료의 통계분석은 각 요로결석의 관전압에 따른 HU값 차이의 유의성을 알아보기 위해 대응표본 T-검정을 시행하였고, p<0.01인 경우에 통계학적으로 유의한 것으로 보았다. 결 과 : 요산석의 HU값은 135kV일 때 412.67±17.49, 100kV일 때 401.50±29.46, 80kV일 때 401.00±24.88로 관전압이 감소함에 따라 HU값은 일정하게 나타났고, 비요산석의 HU값은 135kV일 때 442.19±16.86, 100kV일 때 624.52±26.30, 80kV일 때 826.05±32.15로 관전압이 감소함에 따라 HU값이 증가하였다. 요산석의 경우에 관전압의 변환에 따른 HU값은 통계적으로 유의한 차이를 보이지 않았고(P>0.01), 비요산석의 경우에 80kV와 135kV, 100kV와 135kV, 80kV와 100kV의 HU값은 통계적으로 유의한 차이를 보였다(P<0.01). 135kV에서는 요산석과 비요산석의 HU값이 통게적으로 유의한 차이를 보이지 않았으며(P>0.01), 100kV와 80kV에서는 요산석과 비요산석의 HU값의 차이가 통계적으로 유의한 차이를 보였다(P<0.01) 결 론 : 비 조영증강 전산화단층촬영시 비요산석의 경우에는 관전압이 감소할수록 요로결석의 HU값이 상승함을 알 수 있었고, 요산석의 경우에는 관전압이 증가할수록 HU값이 감소함을 알 수 있었다. 요로결석을 위한 비 조영증강 전산화단층촬영 시에는 100kV 또는 80kV의 저관전압을 이용해야 요로결석의 성분을 진단하는데 도움이 될 것으로 생각된다. Purpose : Information on the components of urinary tract effective therapy plays an important role in determining how and to urinary tract prediction enables the fragility. HU measurement of urinary stone tube voltage according to the value of the Non-uric acid Uric acid changes in the value of the HU to evaluate. Materials and method : Plastic Bottle sapin in the human body, similar to a urinary tract stones using pork was produced in the phantom experiment. 640-Slice MSCT (Aquilion ONE, Toshiba Medical Center, Japan) using the Volume scan approach was taken. Urinary stones according to the image of each tube voltage was measured HU values, the statistical analysis of the data collected for each tube voltage of urinary stones according to the significance of differences in HU values to see performed by paired sample test, p<0.01 If one looked to be statistically significant. Result : Uric acid HU values are 135kV, 412.67±17.49, 100kV, 401.50±29.46, 80kV, 401.00± 24.88, when the tube voltage decreases to a constant value appeared HU, Non-Uric acid HU value is 135kV, 442.19±16.86, 100kV, 624.52±26.30, 80kV, 826.05±32.15, the tube voltage is decreased to HU values increased along. Uric acid in the case of a tube voltage conversion value of the HU, there were no statistically significant differences(P>0.01), Non-uric acid in the case of 80kV and 135kV, 100kV and 135kV, 80kV and 100kV HU value of a statistical significant difference(P<0.01). 135kV is Uric acid and Non-uric acid HU value showed no significant difference(P>0.01), 100kV and 80kV Uric acid and Non-uric acid HU difference was statistically significant difference respectively. (P<0.01) Conclusion : When a non-enhanced spiral computed tomography(CT) in the case of Non-uric acid in the urinary tract tube voltage decreases to that of HU values were rising, Uric acid in the case of HU values increased tube voltage decreased. For urinary stones during non-enhanced spiral computed tomography(CT) of 100kV or 80kV Lower tube voltage should be used for the components of Urinary stone believed to be helpful in diagnosis.
김세훈 ( Se Hoon Kim ),노상호 ( Sang Ho Noh ),김상민 ( Sang Min Kim ),성시영 ( Si Young Sung ),진광진 ( Jin Kwang Jin ),김상민 ( Sang Min Kim ) 대한금속재료학회(구 대한금속학회) 2014 대한금속·재료학회지 Vol.52 No.10
In this study, porous Al-Cu sintered body was fabricated without any space-holder material and its properties, such as porosity, compressive yield strength, shore hardness, and permeability, were evaluated. Al-Cu powder mixtures were prepared by low-energy ball milling. The ball-milled powders were granulated and classified into size with <150 μm and 150-300 μm, and then they were compacted and sintered at 600 ℃ for 1 h in a vacuum and N2 atmosphere. The porosities of sintered bodies could be controlled in range of 15-48% by controlling the compaction pressure. The compressive yield strength and hardness were increased with a decreasing porosity. As a result, the mechanical properties and permeability of the optimized porous body were superior to that of commercial one.