http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최적화알고리즘과 열해석을 통합한 위성방열판 설계의 최적화 방법에 관한 연구
김희경(Hui-Kyung Kim) 한국항공우주연구원 2013 항공우주기술 Vol.12 No.2
위성방열판은 내부의 부품유닛에서 발생하는 열을 외부우주로 방출하는 열전달경로를 확보하기 위해 적용되는 열제어방법 중 한 가지로서, 이것의 최적설계는 효율적인 위성 열설계의 한 방향이 될 수 있다. 본 연구는 위성 열제어 개발에서 활용하는 위성 열해석과 최적화알고리즘을 결합한 통합해석을 통하여 위성열모델 노드기반의 방열판설계최적화 접근방식을 제안하였다. 이 방법은 위성열해석과 최적화알고리즘의 해석소프트웨어의 종류에 상관없이 적용가능한 개념이며, 일반적인 위성열모델을 사용한 방열판설계의 개념을 그대로 유지하면서 최적화를 할 수 있기 때문에 위성설계에 실제적으로 사용할 수 있다. 또한, 두 해석소프트웨어를 결합하는 전체적인 해석구조와 본 방열판 설계 최적화문제에 대한 정식화를 제시하였다. A spacecraft radiator is a thermal control method to eject internally dissipated heat into the space generated from operation of unit boxes. The efficiency of thermal design may be improved by optimizing radiator design. In this paper, the optimization approach method of node-based radiator design was suggested which is to combine numerical thermal analysis with optimization algorithm. This method has meaning that it can be used practically to implement the spacecraft radiator design regardless of thermal analysis and optimization algorithm software and maintain the same basic concept of an ordinary radiator design approach based on node division of a thermal model. The overall analysis framework with thermal analysis and optimization algorithm would be presented.
김희경(Hui-Kyung Kim),장수영(Su-Young Chang),최석원(Seok-Weon Choi) 한국항공우주연구원 2011 항공우주기술 Vol.10 No.2
저궤도 관측위성의 광학탑재체는 궤도에서 임무수행을 뒷받침하는 위성 본체와 열적으로 분리되어 각각 독립된 열제어를 할 수 있도록 개발된다. 광학탑재체는 내부에 작동하는 동안에 높은 발열량으로 순간적으로 온도가 상승하는 부품 박스인 FPA(Focal Plane Assembly)의 열을 외부로 방출하기 위한 히트파이프, 방열판으로 구성된 냉각 장치(Cooling Unit)를 가지고 있다. 이러한 냉각 장치는 고온 조건에서 내부 발열을 빠르게 외부로 방출할 수 있는 히트파이프의 성능과 충분한 면적의 방열판 면적을 확보하도록 설계되어야 하고, 동시에 저온 조건에서 최저 온도 이상을 유지하는 위한 히터설계도 포함해야 한다. 본 연구에서는 먼저 FPA 냉각 장치의 열제어 요구조건과 현재 열설계 기준의 열해석 결과를 통하여 히터설계에 대한 검토와 설계 제한 조건을 분석을 하였다. 또한 열해석을 이용한 효율적이고 경제적인 위성 히터설계 방식을 제시하고, 이것을 FPA 냉각 장치의 히터설계에 적용하여 개선된 히터설계 요소를 찾았다. The electro-optical payload of a low-earth orbit satellite is thermally decoupled with the bus, which supports a payload for a mission operation. The payload has a cooling unit of FPA(Focal Plane Assembly) which has a thermal behavior increasing its temperature instantly during an operation in order to dissipate a waste heat into the space. The FPA cooling unit should include a radiator and heatpipes with a sufficient performance in worst hot condition, and a heater design to maintain its temperature above a minimum allowable temperature in the worst cold condition. In this paper, we analyzed the thermal requirements and the heater design constraints from the thermal analysis results for the current thermal design of the FPA cooling unit and the design elements of the better heater design were found.
지구 저궤도 위성의 영상임무 자세에 따른 열적 영향 고찰
김희경(Hui-Kyung Kim),이장준(Jang-Joon Lee),현범석(Bum-Seok Hyun) 한국항공우주학회 2008 韓國航空宇宙學會誌 Vol.36 No.12
본 논문에서 고려된 저궤도 위성은 고정형 태양 전지판을 가지기 때문에 낮구간(daylight) 동안에 태양전지판이 태양지향(sun-pointing) 자세를 유지하고, 관측 임무 수행을 위해 태양 전지판 방향과 반대방향에 위치한 탑재체가 지구지향(nadir-pointing)이 되도록 자세를 변경한다. 이 때 낮기간의 대부분을 차지하는 태양지향 자세에서는 위성 패널(panel)로 입사하는 외부 열환경 요인이 지구 복사열과 알비도(Albedo)이기 때문에, 비교적 안정적인 열환경 조건을 가지고 있다. 이에 반하여, 관측 임무를 수행하는 궤도 10% 정도의 지구지향 자세에서는 위성의 열환경 조건에 가장 지배적인 영향을 주는 태양광이 위성 패널에 영향을 준다. 비록 위성이 비교적 짧은 시간 동안에 지구 지향의 자세를 유지하지만, 이러한 열환경 조건의 변화 때문에 위성의 열설계에서 지구지향의 임무 자세에 따른 열적 영향에 대한 검토가 필요하다. 본 연구에서는 열해석 모델에 관측 임무 구간 동안의 지구지향 자세를 반영한 열해석 결과를 통하여 그 영향을 알아보았다. A low earth orbit satellite with a fixed solar array always has a sun-pointing attitude during daylight, and changes into a nadir-pointing attitude for a imaging mission. Since external heating sources to the satellite panels are Earth irradiation and Albedo during most of daylight in a sun-pointing attitude, the thermal environment condition is relatively stable. However, direct sunlight which is the greatest environmental heating has an affect on the satellite panels during a mission period (10% of one orbit) in a nadir-pointing attitude. In satellite thermal design, thermal effects of a nadir-pointing mission attitude due to this thermal environment change need to be evaluated although the duration of a nadir-pointing attitude is short. Therefore, a nadir-pointing attitude during a mission is incorporated into thermal model and by the thermal analysis result, thermal effects on the satellite are investigated.
저궤도 위성에서 별센서의 가시성을 위한 Yaw Motion에 따른 열적 영향 고찰
김희경(Hui-Kyung Kim),이장준(Jang-Joon Lee),현범석(Bum-Seok Hyun) 한국항공우주학회 2009 韓國航空宇宙學會誌 Vol.37 No.7
위성 궤도 자세는 위성 열설계에 영향을 주는 중요한 요소로서, 궤도 운용 자세에 대한 열적 조건을 정확히 파악하는 것을 필요로 한다. 본 연구에서는 저궤도 위성의 yaw motion의 운영 자세에 따른 우주 열환경의 변화와 열설계의 열적 영향을 검토하였다. 본 위성은 고정형의 태양 전지판을 가지고 있기 때문에 태양광 구간 동안에 태양지향(sun-pointing)자세를 유지하고, 위성에 장착되는 별센서인 별추적기의 가시 방향이 심층 우주 방향을 향하도록 하기 위하여 위성의 길이 방향을 축으로 일정한 각속도로 회전을 하는 yaw motion을 하도록 운용된다. 이것은 위성이 정밀한 자세 제어의 성능을 발휘할 수 있도록 별추적기가 별의 시야각을 확보하기 위한 것이다. 또한 위성 열설계 측면에서는 이러한 운용을 위한 자세 변화에 따른 열적 영향을 파악하는 것을 필요로 한다. 연구에서는 위성의 열모델에 이러한 궤도 운용 자세를 반영한 후의 궤도 열해석을 통하여 이를 알아보고자 한다. Thermal condition according to the operation attitude of a satellite in orbit would be essential to be known because the orbit attitude is a dominant factor to affect satellite thermal design. In this paper, the change in space thermal environment and the thermal effect in thermal design are studied for a low earth orbit satellite according to the yaw motion. The present satellite retains sun-pointing attitude during daylight due to the fixed type solar arrays. And it also moves along the orbit with constant yaw motion in a longitudinal axis so that a star tracker which is a star sensor for satellite's attitude control always looks into the deep space. This attitude is considered in its better visibility to the stars for a successful mission operation. Also, it is required to access the corresponding thermal effects due to the yaw motion. Therefore, we try to verify these by the thermal analysis for the satellite thermal model with the yaw motion.